An innovative push-fit fitting which provides a quick and easy method of replacing burst or damaged pipe without the need to alter existing pipe work. See below for a step by step installation guide. For use with PEX, CPVC and copper pipe Lead-free and...

An innovative push-fit fitting which allows pipe runs to be branched off an existing pipe run without effect to existing pipe setup. An ideal tool should radiators or other application types need to be added within a refurbishment project. Suitable for use with Pex,...

The ASVPP range is offered in white polypropylene with food-grade EPDM O-ring. The valve connects between your valve and riser, to the main water supply line, for applications in reverse osmosis, filtration systems, automatic coffee brewers, ice-makers and many more. The valves are not...

The ASVPP range is offered in white polypropylene with food-grade EPDM O-ring. The valve connects between your valve and riser, to the main water supply line, for applications in reverse osmosis, filtration systems, automatic coffee brewers, ice-makers and many more. The valves are not...

The coupler is a push-fit plastic fitting for the connection of plastic, copper and CPVC pipe. It was designed, manufactured and assembled by John Guest Speedfit. It can be installed by simply pushing the fitting fully onto the pipe and twist the plastic nut...

The coupler is a push-fit plastic fitting for the connection of plastic, copper and CPVC pipe. It was designed, manufactured and assembled by John Guest Speedfit. It can be installed by simply pushing the fitting fully onto the pipe and twist the plastic nut...

The reducer fitting ensures an easier working environment in confined places, is approved for behind the wall installations and removes the need for hot works on site. Installation can be reduced by around 40% when compared to traditional fixing methods. To install the reducer,...

The reducing coupler is a push-fit plastic fitting for the connection of plastic, copper and CPVC pipe. It was designed, manufactured and assembled by John Guest Speedfit. To install, simply push the fitting fully onto the pipe and twist the plastic nut clockwise to...

Twist and Lock manufactured from high-quality engineered plastic with EPDM O-ring. Suitable for hot and cold water plumbing applications. Can be used with copper, PEX and CPVC pipe. Approved for behind the wall installation. Quick-connect and disconnect Easy to use in confined spaces No...

Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to...

Twist and Lock manufactured from high-quality engineered plastic with EPDM O-ring. Suitable for hot and cold water plumbing applications. Can be used with copper, PEX and CPVC pipe. Approved for behind the wall installation. Quick-connect and disconnect Easy to use in confined spaces No...

Twist and Lock manufactured from high-quality engineered plastic with EPDM O-ring. Suitable for hot and cold water plumbing applications. Can be used with copper, PEX and CPVC pipe. Approved for behind the wall installation. Lead-free and non-toxic Truly demountable without damage to pipe or...

Fittings manufactured in white polypropylene with food-grade EPDM O-ring. For use in out of the wall applications such as connecting ice makers, water treatment equipment, automatic coffee equipment. Twist and lock for added security No tools required Permanent leak-proof connection Lead-free Easy to install...

Fittings manufactured in white polypropylene with food-grade EPDM O-ring. For use in out of the wall applications such as connecting ice makers, water treatment equipment, automatic coffee equipment. Twist and lock for added security No tools required Permanent leak-proof connection Lead-free Easy to install...

Fittings manufactured in white polypropylene with food-grade EPDM O-ring. For use in out of the wall applications such as connecting ice makers, water treatment equipment, automatic coffee equipment. Twist and lock for added security No tools required Permanent leak-proof connection Lead-free Easy to install...

Fittings manufactured in white polypropylene with food-grade EPDM O-ring. For use in out of the wall applications such as connecting ice makers, water treatment equipment, automatic coffee equipment. Quick disconnection without the need for tools High chemical resistance Food quality and suitable for potable...

Fittings manufactured in white polypropylene with food-grade EPDM O-ring. For use in out of the wall applications such as connecting ice makers, water treatment equipment, automatic coffee equipment. Quick disconnection without the need for tools High chemical resistance Food quality and suitable for potable...

Fittings manufactured in white polypropylene with food-grade EPDM O-ring. For use in out of the wall applications such as connecting ice makers, water treatment equipment, automatic coffee equipment. Quick-connect and disconnect Easy to use in confined spaces No tools required Permanent leak-proof connection Plastic...

Fittings manufactured in white polypropylene with food-grade EPDM O-ring. For use in out of the wall applications such as connecting ice makers, water treatment equipment, automatic coffee equipment. Quick-connect and disconnect Easy to use in confined spaces No tools required Permanent leak-proof connection Plastic...

Fittings manufactured in white polypropylene with food-grade EPDM O-ring. For use in out-of-the-wall applications such as connecting ice makers, water treatment equipment, automatic coffee equipment. Designed for hot and cold water and radiant heating systems Push fit fittings Twist and lock for added security...

Fittings manufactured in white polypropylene with food-grade EPDM O-ring. For use in out-of-the-wall applications such as connecting ice makers, water treatment equipment, automatic coffee equipment. No tools required Push-fit connects to copper or plastic Corrosion-free Lead-free Quick disconnection without the need for tools High...

The polypropylene range of inch-size push-in fittings is offered for tube sizes 1/4 to 1/2 in OD. The fittings are manufactured in white polypropylene with food-grade EPDM O-ring. They have been developed to satisfy the filtered pure water market and wide range of applications....

Fittings manufactured in white polypropylene with food-grade EPDM O-ring. For use in out-of-the-wall applications such as connecting ice makers, water treatment equipment, automatic coffee equipment. Designed for hot and cold water and radiant heating systems Push fit fittings Twist and lock for added security...

Fittings manufactured in white polypropylene with food-grade EPDM O-ring. For use in out of the wall applications such as connecting ice makers, water treatment equipment, automatic coffee equipment. Size indicated is end x end x branch. Quick disconnection without the need for tools High...

The polypropylene range of inch-size push-in fittings is offered for tube sizes 1/4 to 1/2 in OD. The fittings are manufactured in white polypropylene with food-grade EPDM O-ring. They have been developed to satisfy the filtered pure water market and wide range of applications....

The polypropylene range of inch-size push-in fittings is offered for tube sizes 1/4 to 1/2 in OD. The fittings are manufactured in white polypropylene with food-grade EPDM O-ring. They have been developed to satisfy the filtered pure water market and wide range of applications....

Produced in polypropylene and fitted with EPDM O-ring, more chemical-resistant than acetal. Use in potable water applications. Not to be used with compressed air, explosive gases, petroleum spirits and other fuels or for heating systems. Quick disconnection without the need for tools High chemical...

Produced in polypropylene and fitted with EPDM O-ring, more chemical-resistant than acetal. Use in potable water applications. Not to be used with compressed air, explosive gases, petroleum spirits and other fuels or for heating systems. Quick disconnection without the need for tools High chemical...

Reverse Osmosis storage tank valve. Produced in polypropylene and fitted with EPDM O-ring, more chemical-resistant than acetal. Use in potable water applications. Not to be used with compressed air, explosive gases, petroleum spirits and other fuels or for heating systems. Sizes indicated are Tube...

Reverse Osmosis storage tank valve. Produced in polypropylene and fitted with EPDM O-ring, more chemical-resistant than acetal. Use in potable water applications. Not to be used with compressed air, explosive gases, petroleum spirits and other fuels or for heating systems. Sizes indicated are Tube...

The speed-fit secure range of fittings including the male connector ensures a secure connection when adapting Speedfit pipe or copper to threaded applications. To install, always use PTFE tape when preparing thread, working up the full thread length. The fitting can be tightened using...

The speed-fit secure range of fittings including the male connector ensures a secure connection when adapting Speedfit pipe or copper to threaded applications. To install, always use PTFE tape when preparing thread, working up the full thread length. The fitting can be tightened using...

The speed-fit secure range of fittings including the male connector ensures a secure connection when adapting Speedfit pipe or copper to threaded applications. To install, always use PTFE tape when preparing thread, working up the full thread length. The fitting can be tightened using...

The female connector is from the Speedfit secure range of fittings that ensure a secure connection when adapting Speedfit pipe or copper to threaded applications. To lock pipe in place, push the pipe into the fitting and turn the nut clockwise. Should the need...

Push-fit fitting for the connection of plastic, copper and CPVC pipe. Designed, manufactured and assembled by John Guest Speedfit. A must for any tool bag. The unique feature of the Speedfit concept, the ability to disconnect the fitting at will, means that the end...

Push-fit fitting for the connection of plastic, copper and CPVC pipe. Designed, manufactured and assembled by John Guest Speedfit. A must for any tool bag. The unique feature of the Speedfit concept, the ability to disconnect the fitting at will, means that the end...

Speedfit secure fittings manufactured from high-quality engineered plastic with EPDM O-ring. Suitable for hot and cold water plumbing applications. Can be used with Copper, PEX and CPVC pipe. Approved for behind the wall installation. Quick-connect and disconnect Easy to use in confined spaces No...

John Guest Pipe Connector, Nominal Size: 1/2 in, CTS Connection, 160 psi, Operating Temperature: 200 deg F, Plastic, Suitable for: CPVC, Copper and PEX Pipe For use as a stiffener when connecting John Guest fittings with PEX or other flexible/non rigid pipe For use...

John Guest Pipe Connector, Nominal Size: 3/4 in, CTS Connection, 160 psi, Operating Temperature: 200 deg F, Plastic, Suitable for: CPVC, Copper and PEX Pipe For use as a stiffener when connecting John Guest fittings with PEX or other flexible/non rigid pipe For use...

2IN & 3IN 400H SUPER FLAPPER K

SINK KITCHEN DBL UNDERMNT 10MM

Keeney Sink Strainer, Brass/Stainless Steel/Thermoplastic Elastomer, 3.4 in Height, 4.9 in Length, 3.4 in Width The new strainer is designed for use in commercial fixtures in educational and food service environments Extended life expectancy in commercial fixtures Red thermoplastic elastomer (TPE) basin and tailpiece...

stainless steel body, rolled edge basket with chrome-plated plastic fixed stick post. Cut threads and die-cast slip nut. For 3-1/2 in Dia opening.

Stainless steel body with cut threads, die-cast slip nut and rolled edge basket. Chrome-plated plastic fixed stick post. 1-1/2 in x 4 in CP. Tailpiece. For 3-1/2 in Dia opening. Boxed.

For 3-1/2 in Dia hole, metal stopper, buffed rim, turn-to-seal-type basket. "Water seal" turn 2 seal-type basket

stainless steel finish, locking shell, for 3-1/2 in sink openings. Heavy-duty chromium finish Hi-tech PTFE seats prevents seizing Double O-ring seal on stem connection with brass ball valve Factory testing to ensure leak-free performance

Keeney Sink Strainer, Brass/Stainless Steel/Thermoplastic Elastomer, 3-3/4 in Height, 4.8 in Length, 3-3/4 in Width The new strainer is designed for use in commercial fixtures in medical, educational and food service environment Extended life expectancy in commercial fixtures Red TPE crumb stopper, basin and...

For 3-1/2 in Dia hole - Neoprene stopper, buffed rim, plastic fixed stick post bracket, thumb screw style lock nut. Thumb screw locknut for easy installation

Keeney Shower Curtain Rod, Dimensions: 5 ft L x 1 in W, Aluminum, Gray

Keeney Shower Curtain Rod, Dimensions: 6 ft L x 1 in W, Aluminum, Gray