For 3/8 in ID (1/2 in OD) corrugated tube. Recommended for forced air heaters, gas ranges, furnaces and water heater connections. Use with PlumbShop SD or RSD Series connectors.

For 3/8 in ID (1/2 in OD) corrugated tube. Recommended for fixed air heater, gas range, furnace and water heater connections. Used with PlumbShop SD or RSD Series connectors. Tapped 3/8 in FIP thread.

Recommended for appliance connections. Corrosion-resistant brass construction with yellow painted aluminum handles. Threads conform to all applicable standards. CSA design Certified and meets ANSI Z21-15. Heavy-duty forged brass body eliminates pinhole leaks commonly associated with cast products Blowout proof stem assembled from the inside...

UPC individually bagged.

For 1/4 in ID (3/8 in OD) corrugated tube. For gas clothes dryer connections. Tapped 1/8 in female pipe thread. Dimension of 5-1/2 in L x 3.8 in W x 0.6 in D.

For 1/4 in ID (3/8 in OD) corrugated tube. Recommended for gas clothes dryer connections. Use with PlumbShop SL or RSL Series connectors.

For 1/4 in ID (3/8 in OD) corrugated tube. Recommended for gas clothes dryer connections. Use with SL or RSL Series connectors. Tapped 3/8 in female pipe thread.

BrassCraft® 1/2 in FIP inlet x 3/8 in OD compression x 3/8 in OD compression dual outlet, dual shut-off multi-turn angle valve controls water flow to household plumbing fixtures. The angle valve is most often used where the water pipe enters the room from...

BrassCraft® 1/2 in FIP inlet x 1/2 in OD compression x 3/8 in OD compression (right side) dual outlet multi-turn valve controls water flow to household plumbing fixtures. The dual outlet allows two independent supply lines to be attached to a single valve. Ideal...

Pipe thread sealant is used to seal male to female pipe threads. The leak detection solution is applied (poured) on the joints of a gas installation to detect unsafe seals in the component-to-component connections (shut-off valve to adapter to gas connector and gas connector...

BrassCraft's exclusive line of Italian made gas ball valves are specially engineered to provide unsurpassed product performance. From the stem to the body to the exclusive handle design, every detail has been master crafted for ease of operation and installation. This valve can be...

BrassCraft's exclusive line of Italian made gas ball valves are specially engineered to provide unsurpassed product performance. From the stem to the body to the exclusive handle design, every detail has been master crafted for ease of operation and installation. This valve can be...

Reduces chlorine, lead and other impurities. Chrome finish, easy installation, no tool needed. Space efficient design, one filter can replace 750 water bottles. (16 oz).

Eliminates 98.5% of the lead and by filtering out sediment, chlorine (taste and odor) and also reducing chemicals that may be linked to cancer risk (TTHM, benzene, TCE, toxaphene). Attaches easily in minutes without using tools, fits all standard faucets with quick and easy...

Each Brita® drinking water filter cartridge is BPA-free and reduces chlorine (taste and odor) and particulates to keep your water tasting great. Ensure you find the best water filter for you, as filtering properties of each water filter cartridge varies depending on the type...

Fits in Brita faucet filtration systems. One filter. Filters up-to 100 gallons of water and should last about 4 months (for the average family) The FR-200 cartridge does not remove Fluoride Fits Brita models FF-100/42201 (754.0545) and OPFF-100, and any other model that uses...

Fits in Brita faucet filtration systems. One filter.

VANITY TOP CULT MARB BNE 22X31

Burcam 101 Deep-Well Submersible Pump, 1-1/4 x 4 in Connection, NPT Connection, 230 V, 5 A, 0.5 hp, 10 gpm, 80 psi, Motor Type: Continuous-Duty, Maximum Head: 225 ft, Number of Stages: 9, Stainless Steel, Includes: Control Box Made of non-corrosive 316 stainless steel...

Burcam Submersible Well Pump, 4 x 1-1/4 in Connection, NPT Connection, 230 VAC, Frequency Rating: 60 Hz, Number of Phases: 3, 0.75 hp, 10 gpm, 20 to 50 psi, Maximum Head: 275 ft, Number of Stages: 12, Stainless Steel, Includes: Control Box Made of...

The jet pumps, for the shallow well (up to 25 ft of suction lift) or convertible for the deep well (up to nearly 85 ft of suction lift for some models), are available in various series from cast iron to thermoplastic as well as...

1/3 hp 115 V thermoplastic zinc motor housing dissipates heat quickly and stops premature rust to extend motor life. 1-1/2 in NPT discharge with 1-1/4 in reducer. Noryl® impeller, tether float switch, thermal and overload protection, 9 ft grounded electric cable, oil cooled motor...

Burcam Submersible Utility Pump, 0.166 hp, 740 gph, Maximum Lift Head: 15 ft, 115 V, Frequency Rating: 60 Hz, Housing Material: Thermoplastic, Black/Blue

Oil-cooled motor 1/2 hp continuous duty, with automatic thermal overload protection. Pump body made of cast iron and stainless steel. High flow rated, 1-1/2 in NPT discharge with 1-1/4 in reducer included. Noryl® vortex impeller, clog-free type (non-corrosive), automatic vertical float switch USA made,...

1/3 hp 115 V heavy-duty cast iron and zinc motor housing dissipates heat quickly and stops premature rust to extend motor life. 1-1/2 in NPT discharge with 1-1/4 in reducer, Noryl® impeller, piggyback tether float switch, easy-to adjust. Thermal and overload protection, 9 ft...

Burcam Submersible Sump Pump, 0.5 hp, 3000 gph, Maximum Lift Head: 5 ft, 115 V, Frequency Rating: 60 Hz, Housing Material: Cast Iron, Silver

Burcam Drain Hose Kit, 1-1/4 in Dia Outside, 20 ft L, Includes: Adapter and Clamp

Burcam Drain Hose Kit, 1-1/2 in Dia Outside, 24 ft L, Includes: Adapter and Clamp

1/2 hp 115 V Heavy-duty cast iron and zinc motor housing dissipates heat quickly and stops premature rust to extend motor life. Submersible sewage pump. 2 in discharge and 2 in handling capabilities, 15a. vortex design impeller, made from glass filled Noryl®, standard mechanical...

Burcam Jet Pump, 115/230 V, 8.4, 4.2 A, Frequency Rating: 60 Hz, 0.75 hp, 65 psi, Motor Type: TEFC, Maximum Head: 25 ft, Thermoplastic Totally enclosed, fan cooled motor, bearing to bearing, built for a continuous use Full time connected run capacitor, to eliminate...

Cast iron convertible jet pump. SW operation 0 to 25 ft with ejector screwed on pump body. DW operation 0 to 80 ft with 2 pipes and ejector down in the well. High performance Noryl® impeller, industrial motor totally enclosed, fan cooled. full time...

Stainless steel pump housing, easy to prime, totally enclosed fan cooled motor, up to 900 gph, up to 65 psi. Maximum vertical suction lift of 25 ft, high performance Noryl® impeller and built-in ejector, stainless steel rotor shaft and mechanical seal. 18 lb (8.18...

3/4 hp stainless steel pressure booster/tankless jet pump system. Water supply pressure booster can be used to increase and maintain municipal water pressure. Tankless shallow well jet pump to deliver constant pressure without annoying pressure fluctuations. Eliminates need for pressure switch or tank. Up...

Stainless steel. 6.6 gal tank, easy to prime, totally enclosed fan cooled motor, up to 900 gph, up to 65 psi, maximum vertical suction lift of 25 ft, high performance Noryl® impeller and built-in ejector. Pre-assembled for quick easy installation. Stainless steel pump body,...

The jet pumps, for the shallow well (up to 25 ft of suction lift) or convertible for the deep well (up to nearly 85 ft of suction lift for some models), are available in various series from cast iron to thermoplastic as well as...

80 L free-standing captive air pressure tank. 100 psi maximum working pressure (tested to 150 psi). No water/air contact. Rust-free operation. no air volume control needed and no waterlogging. 80 L (20 gal) capacity with 7.5 gal of draw-down performance, over a 42 gal...

Burcam Bladder Pressure Tank, 1 in Connection, NPT Connection, 26 gal, Epoxy, Working Pressure: 75 psi

1/2 hp 115 V thermoplastic zinc motor housing dissipates heat quickly and stops premature rust to extend motor life. 1-1/2 in NPT discharge with 1-1/4 in reducer. Noryl® impeller, independent piggyback tether float switch, thermal and overload protection, 9 ft grounded electric cable, oil-free...

PUMP UTILITY MARINE/RV 12V

PIPE STRAP COPPER 1/2 IN

PIPE STRAP COPPER 3/4 IN

FAUCET LAV CTRSET CHROME 4.5IN

FAUCET ELEC MTN SNS SINGLE MT

FAUCET KTN H-ARC 1-HNDL CHROME

FAUCET KTN H-ARC 1HNDL MED BRZ

FCT KTN CHRM 1HNDL 8IN CTR

FCT KTN SS 1HNDL 8IN CTR

FAUCET KTN W/SD SPRAY 1 HNDL

FCT KTN SS 1HNDL 8IN CTR