The Strong-Drive® SD connector screw is specifically designed to replace nails in certain Simpson Strong-Tie® connectors and is the only screw approved for that application. The load-rated SD screw has been tested and approved for use in many popular Simpson Strong-Tie® products. In certain...

The PT-27 is a semi-automatic and fast-cycling fastening tool that is engineered for continuous use, high-reliability and low maintenance. This versatile tool fires a variety of fastener types and lengths. Semi-automatic and fast-cycling Compatible with Simpson Strong-Tie® powder loads and pins Extension pole tool...

The PT-22A is a powder-actuated tool that uses 0.22 caliber a crimp loads, has single-shot firing action and is engineered for continuous use, high-reliability and low maintenance. Engineered for continuous use, high-reliability and low maintenance Uses 0.3 in or 8 mm headed fasteners or...

The Simpson Strong-Tie® Quik Stik installation tool provides contractors with a versatile solution that makes fastening rafter and truss connections fast, safe and easy. Drive screws overhead from a standing position with no ladders Designed for use inside the structure no need to work...

The Outdoor Accents® connector screw reduces installation time by driving easily without pre-drilling. Designed for installation with the Outdoor Accents® connectors, such as the APA21 90 deg angle, APLH light joist hangers and APGT gazebo ties, the screw's black finish accents any outdoor living...

The PT-22HA is a small, powder-actuated direct fastening tool. The design includes a large strike point and comfortable grip, making it ideal for a range of DIY projects. This easy-to-use tool is hammer-activated and engineered for low maintenance. Hammer-activated tool Engineered for low maintenance...

The cordless Quik Drive PRO300SG2 decking system a complete auto-feed screwdriving system powered by the DeWALT® cordless driver motor that makes deck installations fast and easy. The powerful 2000 rpm, 20 V cordless DeWALT brushless driver motor and lightweight extension arm make this Quik...

Simpson Strong-Tie® P27SL 0.27 caliber single-shot loads are compatible with all Simpson Strong-Tie® 0.27 caliber tools and other common 0.27 caliber tools. Compatible with all Simpson Strong-Tie® 0.27 caliber tools and other common 0.27 caliber tools

Simpson Strong-Tie® P22AC 0.22 caliber "A" crimp loads are compatible with PT-22A, PT-22HA tools and other common low-velocity, single-shot powder-actuated tools. Compatible with Simpson Strong-Tie® powder-actuated tools and most major brands

Simpson Strong-Tie® P27SL 0.27 caliber single-shot loads are compatible with all Simpson Strong-Tie® 0.27 caliber tools and other common 0.27 caliber tools. Compatible with all Simpson Strong-Tie® 0.27 caliber tools and other common 0.27 caliber tools

Simpson Strong-Tie® P22AC 0.22 caliber "A" crimp loads are compatible with PT-22A, PT-22HA tools and other common low-velocity, single-shot powder-actuated tools. Compatible with Simpson Strong-Tie® powder-actuated tools and most major brands

Simpson Strong-Tie® P22AC 0.22 caliber "A" crimp loads are compatible with PT-22A, PT-22HA tools and other common low-velocity, single-shot powder-actuated tools. Compatible with Simpson Strong-Tie® powder-actuated tools and most major brands

The SPH is a heavy U-shaped strap designed as a stud-to-plate connection to resist roof uplift. This heavy U-shaped strap has a horizontal portion that bears against the wood wall top-plates or sill plates and two vertical legs that are nailed to the edges...

Simpson Strong-Tie® P27SL 0.27 caliber single-shot loads are compatible with all Simpson Strong-Tie® 0.27 caliber tools and other common 0.27 caliber tools. Compatible with all Simpson Strong-Tie® 0.27 caliber tools and other common 0.27 caliber tools

The SP4 are designed as stud-to-plate connections to resist roof uplift in cold-formed steel (CFS) applications. These U-shaped straps have a horizontal portion that bears against the steel top-plates or sill plates and two vertical legs that are screwed to the steel stud. These...

The SP1 and SP2 are designed as stud-to-plate connections to resist uplift. The SP1 is designed for sill-to-stud connections while the SP2 is for the double-top-plate-to-stud connection. These stud-plate ties feature angled holes for a positive connection from the stud to the plates. Features...

The RTU is designed for connecting intersecting members in wood construction applications. Manufactured to high-quality standards to ensure solid performance, this U-shaped rigid tie features a G90 galvanized finish for added corrosion resistance. The versatile RTU is ideal for a variety of projects including...

The Strong-Drive® SDWS timber screw is designed to provide an easy to install, high-strength alternative to through-bolting and traditional lag screws. This screw is ideal for the contractor and do-it-yourselfer alike. It is code listed in IAPMO UES ER-192 and meets 2018 and 2021...

The SP1 are designed as stud-to-plate connections to resist uplift. The SP1 is designed for sill-to-stud connections. These stud-plate ties feature angled holes for a positive connection from the stud to the plates. Features embossments that strengthen the stud-plate connection Designed to resist wind...

The RTF is designed to connect two horizontal 2X members to a vertical 2 x 4 in wood applications. Manufactured to high-quality standards to ensure solid performance, this flat rigid tie connector features a galvanized finish for added corrosion resistance. Fastens with Simpson Strong-Tie®...

The RTC is a uniquely designed rigid tie connector that connects two horizontal members at a corner to a vertical wood member. Manufactured to high-quality standards to ensure solid performance, this corner rigid tie connector features a galvanized finish for added corrosion resistance. Rigid...

The SP1 and SP2 are designed as stud-to-plate connections to resist uplift. The SP1 is designed for sill-to-stud connections while the SP2 is for the double-top-plate-to-stud connection. These stud-plate ties feature angled holes for a positive connection from the stud to the plates. Features...

The Strong-Drive® SDWS timber screw is designed to provide an easy to install, high-strength alternative to through-bolting and traditional lag screws. This screw is ideal for the contractor and do-it-yourselfer alike. It is code listed in IAPMO UES ER-192 and meets 2018 and 2021...

The RPBZ retrofit post-base is designed to reinforce existing posts and columns. The single, versatile model will fit on any size post consisting of a double 2 x 4 or larger. RPBZ can also be used to reinforce new post-base connections such as braced...

The RTB is designed for connecting intersecting 2X members in wood construction applications. Manufactured to high-quality standards to ensure solid performance, this rigid tie features a G90 galvanized finish for added corrosion resistance and requires the use of hot-dip galvanized fasteners. The versatile RTB...

The RTC is a uniquely designed rigid tie connector that connects two horizontal members at a corner to a vertical wood member. Manufactured to high-quality standards to ensure solid performance, this corner rigid tie connector features a galvanized finish for added corrosion resistance. Compatible...

An interlock provides alignment control and correct nailing locations. For a rafter-to-face connector, flatten the top-flange into the face plane. The RR may be used with rafters sloped up to 30 deg. Easier and stronger than toenailing or screw fastening Top-flange designed to interlock...

The RTC is a uniquely designed rigid tie connector that connects two horizontal members at a corner to a vertical wood member. Manufactured to high-quality standards to ensure solid performance, this corner rigid tie connector features a galvanized finish for added corrosion resistance. No...

PSPN58Z and PSPN516Z protecting shield plate fastener stoppers meet IRC, IBC and the International Plumbing Code. PSPN516Z meets the code plumbing protection requirements as well as having additional fasteners if the designer chooses to use it as a track splice strap. ZMAX® galvanization offers...

The RTA is designed to connect two wood members at a 90 deg angle. This rigid tie angle fastens the members on two sides, eliminating the need for angle bracing. Manufactured to high-quality standards to ensure solid performance, this rigid tie connector features a...

PSPN58Z and PSPN516Z protecting shield plate fastener stoppers meet IRC, IBC and the International Plumbing Code. PSPN516Z meets the code plumbing protection requirements as well as having additional fasteners if the designer chooses to use it as a track splice strap. Meets structural and...

Simpson Strong-Tie panel sheathing clips are used to brace unsupported sheathing edges and provide a 1/8 in gap to address shrinkage and expansion of roof sheathing.

The PSCL is designed to brace unsupported sheathing edges when sheathing meets edge to edge without a rafter for support. This light sheathing clip provides a 1/8 in gap to address shrinkage and expansion of roof sheathing. Inserted over the edges of adjacent plywood...

The PSCL is designed to brace unsupported sheathing edges when sheathing meets edge to edge without a rafter for support. This light sheathing clip provides a 1/8 in gap to address shrinkage and expansion of roof sheathing. Inserted over the edges of adjacent plywood...

The PSCL is designed to brace unsupported sheathing edges when sheathing meets edge to edge without a rafter for support. This light sheathing clip provides a 1/8 in gap to address shrinkage and expansion of roof sheathing. Inserted over the edges of adjacent plywood...

The PSCL is designed to brace unsupported sheathing edges when sheathing meets edge to edge without a rafter for support. This light sheathing clip provides a 1/8 in gap to address shrinkage and expansion of roof sheathing. Inserted over the edges of adjacent plywood...

Ideal® cohesive bandage wraps are durable, self-adhering bandages that come in 2 in and 4 in widths and can be used in a variety of different situations. The bandages include an Easy-Start tab and a colored starting line, making them quick and easy to...

The PSCA is designed to brace unsupported sheathing edges when sheathing meets edge to edge without a rafter for support. This light sheathing clip provides a 1/8 in gap to address shrinkage and expansion of roof sheathing. Inserted over the edges of adjacent plywood...

The PSCA is designed to brace unsupported sheathing edges when sheathing meets edge to edge without a rafter for support. This light sheathing clip provides a 1/8 in gap to address shrinkage and expansion of roof sheathing. Inserted over the edges of adjacent plywood...

The PSCA is designed to brace unsupported sheathing edges when sheathing meets edge to edge without a rafter for support. This light sheathing clip provides a 1/8 in gap to address shrinkage and expansion of roof sheathing. Inserted over the edges of adjacent plywood...

Ideal® cohesive bandage wraps are durable, self-adhering bandages that come in 2 in and 4 in widths and can be used in a variety of different situations. The bandages include an Easy-Start tab and a colored starting line, making them quick and easy to...

The PDPAWL is a powder-actuated washered pin designed to fasten building components to concrete, steel and CMU. The PDPAWL consists of a hardened-steel PDPA pin preassembled with a 1″ washer that provides additional bearing surface for enhanced upload resistance. The PDPAWL is designed for...

Ideal cohesive bandage wraps are durable, self-adhering bandages that come in 2 and 4 in W and can be used in a variety of different situations. The bandages include an easy start tab and a colored starting line, making them quick and easy to...

The Deck-Drive™ DWP wood SS screw is a powerful fastening solution for deck, dock and general exterior applications where extra corrosion protection is needed. With its specially designed sharp-point and unique box-threads, the DWP is ideally suited for the majority of wood used in...

Ideal cohesive bandage wraps are durable, self-adhering bandages that come in 2 and 4 in W and can be used in a variety of different situations. The bandages include an easy start tab and a colored starting line, making them quick and easy to...

The PS is designed to support heavy, concentrated loads by creating a strong connection between wood girders and piles. The PS is a load-rated, precut strap designed for quick installation and optimal performance. This pile strap brings greatest strength to the connection when the...

The PDPAWL is a powder-actuated washered pin designed to fasten building components to concrete, steel and CMU. The PDPAWL consists of a hardened-steel PDPA pin preassembled with a 1 in washer that provides additional bearing surface for enhanced upload resistance. The PDPAWL is designed...

Keep your Quik Drive auto-feed screw driving system in ideal condition with these Simpson Strong-Tie® replacement parts. For use with Simpson Strong-Tie® Quik Drive systems

The PDPA is a hardened-steel, powder-actuated fastener designed to fasten building components to concrete, steel and CMU. The PDPA consists of a fastener with a 0.3 in Dia head and a 0.157 in Dia shank. The PDPA provides maximum jobsite productivity with fast installation....

The PDPAWL is a powder-actuated washered pin designed to fasten building components to concrete, steel and CMU. The PDPAWL consists of a hardened-steel PDPA pin preassembled with a 1″ washer that provides additional bearing surface for enhanced upload resistance. The PDPAWL is designed for...