Imperial Furnace Short Increaser, 5 to 6 in, Galvanized, 24 ga Crimped on big end Used to increase diameter of galvanized round perimeter pipe

Replacement wick, fits models Kero-World KC1208, Dyna Glo RMC-11C, 11C7, DuraHeat DH1050.

Imperial Chimney Thimble, Material Gauge: 28, Galvanized Steel, Galvanized, Dimensions: 7 x 6 in, Suitable for: Tee Branch and Chimney Section

Produce a spray that distributes droplets fairly uniformly throughout the complete pattern. The spray pattern becomes progressively more hollow at higher flow rates. Provides smooth ignition and efficient combustion, particularly in larger burners.

3/4 in female hose connection inlet x 3/4 in hose connection with tapped 1/8 in I.P, straight through side wall.

Pro-quality plumbing tool. For hot water radiators, convectors and baseboards. Carded.

Dial Pillow Block Bearing, Dimensions: 5/8 in Dia, Suitable for: Evaporative Cooler Purge Systems 5/8 in pillow block assembly

heavy-duty design built for the jobsite. The Mr. Heater liquid propane forced air heater comes with a standard 10 ft hose and regulator and all the safety you would expect of a Mr. Heater product. Equipped with factory installed high-limit switches and thermoelectric safety...

For ductless installations and mobile homes. Diffuses air 4 ways or 6 ways with 14 adjustable louvers, made with white colored, high-impact plastic. Will not rust, corrode or stain. For duct openings up to 20 in x 20 in. Grille is 22-1/2 in x...

Sturdy metal construction. Replace at least once per season. Replacement furnace water pad fits Aprilaire 350, 360, 560, 560A, 568, 600, 700, 760, 760A, 768 (35), Honeywell HE200A, HE250A, HE260 A/B, HE265A/B, ME360, HE360A/B, HE365A/B, Lennox WB2-17, WB2-17A, WP2-18,WP2-18A.

Use to run water to cooler. Attaches to copper pipe 3/8 to 1-3/8 in OD. Available with rigid self piercing needle. Rigid self-piercing needle Used to run water to cooler

Reinforced design for longer life and better efficiency. Traps impurities in the water. Anti-Microbial Treated. Wick filter fits Emerson HD1100/02, 1200/02/04/12/14, 1300/01/03/05, 1405/06/07, HD230 (HDC-12) and Quiet Comfort 12 gal, Kenmore 14415/17/52/53/54, 14911, 144150/151/170/521/522/523/530/531/532/533 (14911), 154140/200, 42.14452/53/54, 758.144150/151/170/171, 14452/520/521/522/523/5630/531/532/533, 154140/200, 155171, 299751C/752C/870C, 2pk.

1/4 in CC Tee, for connecting two coolers to one water source. Includes poly tube adapters. Low lead level - less than 0.25%

Produce a spray that distributes droplets fairly uniformly throughout the complete pattern. The spray pattern becomes progressively more hollow at higher flow rates. Provides smooth ignition and efficient combustion, particularly in larger burners.

Variable pulleys must be opened 2-1/2 to 5 full turns, depending on air resistance or motor will overheat. If motor cycles (stops and starts due to over-heating), open variable pulley until motor stops cycling. If cycling persists when pulley is fully opened, you must...

Imperial Tee, 8 in, 26 ga, Galvanized Steel Use as 90 deg branch for venting applications including heating and air conditioning Use reducers to modify multiple pipe size connections

The Frost King universal air conditioner support expands to accommodate windows up to 36 in and has a powder-coated, rust-free finish. It supports window air conditioner units up to 100 lb. The precision bubble level ensures proper installation. The support leg braces against the...

The Frost King universal air conditioner support expands to accommodate windows up to 36 in and has a powder-coated, rust-free finish. It supports window air conditioner units up to 100 lb. The precision bubble level ensures proper installation. The support leg braces against the...

The Frost King air conditioner support bracket is a must-have item when installing a window air conditioning unit. The Frost King Air conditioner bracket safely supports AC units. Secure and durable

BestAir Wick Humidifier Filter, Replacement, Frame Material: Aluminum, Suitable for: Honeywell HCM6009, 6011i, 6011ww, 6012i, 6013i Humidifier

Dial Pillow Block Bearing, Dimensions: 1 in Dia, Suitable for: Evaporative Cooler Purge Systems 1 in pillow block assembly

Imperial Volume Damper with Sleeve, Galvanized, 6 in Dia

Imperial Butterfly Damper, Galvanized, 4 in Dia

Imperial Butterfly Damper, Galvanized, 6 in Dia

Mainly used on burners with a hollow cone air pattern and for throughputs up to 2 GPH. The droplet distribution is concentrated on the outside of the cone and results in good ignition and low-noise combustion.

For transition from air plenums or rectangular duct to round pipe or insulated flexible duct. Crimped collars for interlocking fit.

The EZ Flow II filter is made to function without a retainer by adhering the frame directly to the media, which has a light skin to make it self-retaining. The EZ Flow II frame is made from heavy chipboard in a one-piece design that...

Imperial Furnace Short Increaser, 3 to 4 in, Galvanized, 24 ga Crimped on big end Used to increase diameter of galvanized round perimeter pipe

For whole-house comfort, the Executive Series is a smart solution. Nine fan speeds and an adjustable humidistat make it easy to reach an ideal humidity level. Customers like its auto shutoff, refill indicator, check filter indicator and touch screen controls. Unit uses one (1)...

Bacteria treatment, EPA registered. Helps control bacteria and algae build-up and keeps water smelling clean. Helps control bacteria and algae buildup Keeps water smelling clean EPA registered Only for evaporative humidifiers

Adjustable 4 piece elbow. Adjusts from straight through 90 deg.

The EZ Flow II filter is made to function without a retainer by adhering the frame directly to the media, which has a light skin to make it self-retaining. The EZ Flow II frame is made from heavy chipboard in a one-piece design that...

3/4 in FIP inlet x 3/4 in hose connection with tapped 1/8 in I.P, straight through side wall.

The EZ Flow II filter is made to function without a retainer by adhering the frame directly to the media, which has a light skin to make it self-retaining. The EZ Flow II frame is made from heavy chipboard in a one-piece design that...

Mainly used on burners with a hollow cone air pattern and for throughputs up to 2 GPH. The droplet distribution is concentrated on the outside of the cone and results in good ignition and low-noise combustion.

The EZ Flow II filter is made to function without a retainer by adhering the frame directly to the media, which has a light skin to make it self-retaining. The EZ Flow II frame is made from heavy chipboard in a one-piece design that...

Imperial Stove Pipe Reducer, 9 x 6 in, 26 ga Thick Wall, Galvanized, Mill finish

Used to transition the diameter of galvanized round pipe.

Used to transition the diameter of galvanized round pipe.

Used to distribute warm and cold air. Easy to clean snap-lock system

Used to distribute warm and cold air. Easy to clean snap-lock system

Adjustable 4 piece elbow. Adjusts from straight through 90 deg.

Adjustable 4 piece elbow. Adjusts from straight through 90 deg.

Adjustable 4 piece elbow. Adjusts from straight through 90 deg.

Used to distribute warm and cold air. Easy to clean snap-lock system

Used to distribute warm and cold air. Easy to clean snap-lock system

Used primarily for heating and air conditioning applications for transition from one round pipe two round pipes.

Imperial Left Reverse Elbow, 30 ga, Steel, 10 in L x 3-1/4 in W Dimensions

Imperial Connector Union, 6 in Union, Round Duct, Galvanized Steel

Used primarily for heating and air conditioning applications for transition from one round pipe two round pipes.