BUILDING MATERIALS

Vendor: SIMPSON STRONG-TIE

Simpson Strong-Tie CS CS14-R Coiled Strap, 14 ga Gauge, Steel, Silver, Galvanized
CS coiled utility straps are an ideal solution when it is desired to brace wall studs via the flanges with strap. These products are packaged in lightweight cartons (about 40 lb) and can be cut to length on the job site. Gauge stamped on...

$65.66

$65.66

Unit price

per
Vendor: SIMPSON STRONG-TIE

Simpson Strong-Tie CS CS16-R Coiled Strap, 16 ga Gauge, Steel, Galvanized
The CS is a continuous utility strap designed to resist tension and uplift loads. This coiled strap can be cut to length on the job site and used in a single 2X stud or post application. The CS is ideal for many applications including...

$50.93

$50.93

Unit price

per
Vendor: SIMPSON STRONG-TIE

Simpson Strong-Tie CS CS20-R Coiled Strap, 20 ga Gauge, Steel, Galvanized
CS coiled utility straps are an ideal solution when it is desired to brace wall studs via the flanges with strap. These products are packaged in lightweight cartons (about 40 lb) and can be cut to length on the job site. Gauge stamped on...

$43.94

$43.94

Unit price

per
Vendor: SIMPSON STRONG-TIE

Simpson Strong-Tie CS CS22-R Coiled Strap, 25 ft L, 1-1/4 in W, Steel, Galvanized, Fastening Method: Nail
The CS is a continuous utility strap designed to resist tension and uplift loads. This coiled strap can be cut to length on the job site and used in a single 2X stud or post application. The CS is ideal for many applications including...

$41.30

$41.30

Unit price

per
Vendor: SIMPSON STRONG-TIE

Simpson Strong-Tie DJT DJT14Z Deck Joist Tie, 3 in W, Steel, ZMAX, Fastening Method: Bolt, Nail
The DJT14Z deck joist tie is designed to attach 2X deck joists to the side of 4X or larger support posts. The DJT14Z can be installed with either nails or bolts. Connects a 2X member (typically a beam) to the side of the post...

$5.03

$5.03

Unit price

per
Vendor: SIMPSON STRONG-TIE

Simpson Strong-Tie DPTZ DPT5Z Deck Post Tie, 3-1/2 in L, Steel, ZMAX
The DPTZ deck post tie products are used to attach 2 x 4 (DPT5Z) or 4 x 4 (DPT7Z) vertical posts to the side of stringers, rims or other wood members. Connects a 2 x 4 post to the outside of stair-stringers and rim...

$4.06

$4.06

Unit price

per
Vendor: SIMPSON STRONG-TIE

Simpson Strong-Tie DPTZ DPT7Z Deck Post Tie, 3-1/2 in L, 3-1/2 in W, Steel, ZMAX, Fastening Method: Nail
The DPTZ deck post tie products are used to attach 4 x 4 (DPT7Z) vertical posts to the side of stringers, rims or other wood members. Connects a 4 x 4 post to the outside of stair-stringers and rim joists on decks or stairs...

$4.85

$4.85

Unit price

per
Vendor: SIMPSON STRONG-TIE

Simpson Strong-Tie DTC Roof Truss Clip, 18 ga Gauge, Steel, Galvanized
For alignment control between a roof truss and nonbearing walls, the 1-1/2 in slot permits vertical truss chord movement when loads are applied. The slot in one leg allows for flexible installation and adjustability Product not intended for floor applications due to the frequency...

$2.19

$2.19

Unit price

per
Vendor: SIMPSON STRONG-TIE

Simpson Strong-Tie DTT DTT1Z Deck Tension Tie, 7-1/8 in L, 1-1/2 in W, Steel, ZMAX, Fastening Method: Nail, Screw
DTT tension ties are safe, cost-effective connectors designed to meet or exceed code requirements for deck construction. These versatile DTT connectors are also load-rated as a hold-down for light-duty shearwalls and braced-wall panel applications. Eliminates the need to access the floor joists inside the...

$3.43

$3.43

Unit price

per
Vendor: SIMPSON STRONG-TIE

Simpson Strong-Tie DTT DTT1Z-KT Deck Tension Tie Kit, 7-1/8 in L, 1-1/2 in W, Steel, ZMAX
DTT tension ties are safe, cost-effective connectors designed to meet or exceed code requirements for deck construction. These versatile DTT connectors are also load-rated as a hold-down for light-duty shearwalls and braced-wall panel applications. Eliminates the need to access the floor joists inside the...

$47.46

$47.46

Unit price

per
Vendor: SIMPSON STRONG-TIE

Simpson Strong-Tie DTT DTT2Z Deck Tension Tie, 3 in L, 3-1/4 in W, Steel, ZMAX, Fastening Method: Screw
DTT tension ties are safe, cost-effective connectors designed to meet or exceed code requirements for deck construction. These versatile DTT connectors are also load-rated as a hold-down for light-duty shearwalls and braced-wall panel applications. Suitable for lighter duty holdown applications on single or double...

$11.97

$11.97

Unit price

per
Vendor: SIMPSON STRONG-TIE

Simpson Strong-Tie E-Z Mender FPBM44E Fence Post Repair Bracket, 12 ga Gauge, Steel, Powder-Coated, Screw Mounting
The E-Z Mender is part of a Simpson Strong-Tie® line of products designed to help make reinforcing fence posts simple and economical. The E-Z product line offers solutions for a variety of fence post projects. These fence post repair brackets allow for easy repair...

$18.28

$18.28

Unit price

per
Vendor: SIMPSON STRONG-TIE

Simpson Strong-Tie ECCQ ECCQ44SDS2.5 Column Cap, 3-5/8 in Post/Joist, Steel
The ECCQ is designed to provide strong column-beam connections in end-of-beam applications in wood construction. The seat of the column cap provides an additional surface area of bearing that extends beyond the side of the column. The extended bearing surface helps distribute the load...

$95.44

$95.44

Unit price

per
Vendor: SIMPSON STRONG-TIE

Simpson Strong-Tie ECCQ ECCQ66SDS2.5 Column Cap, 5-1/2 in Post/Joist, Steel
The ECCQ is designed to provide strong column-beam connections in end-of-beam applications in wood construction. The seat of the column cap provides an additional surface area of bearing that extends beyond the side of the column. The extended bearing surface helps distribute the load...

$102.04

$102.04

Unit price

per
Vendor: SIMPSON STRONG-TIE

Simpson Strong-Tie EPB EPB44 Elevated Post Base, 4 x 4 in Post, 12 ga Gauge, Steel, Gray
These cast-in-place post-bases provide a secure connection to the concrete and the code-required 1 in stand-off to help prevent rot at the post-end. EPB44PHDG can be used both for pier block and cast-in-place installation for 4 x 4 posts. Added stand-off adjustability to suit...

$20.02

$20.02

Unit price

per
Vendor: SIMPSON STRONG-TIE

Simpson Strong-Tie EPB EPB44A Elevated Post Base, 4 x 4 in Post, 14 ga Gauge, Steel, Galvanized
These cast-in-place post-bases provide a secure connection to the concrete and the code-required 1 in stand-off to help prevent rot at the post-end. EPB44PHDG can be used both for pier block and cast-in-place installation for 4 x 4 posts. Added stand-off adjustability to suit...

$17.79

$17.79

Unit price

per
Vendor: SIMPSON STRONG-TIE

Simpson Strong-Tie EPB EPB66 Elevated Post Base, 6 x 6 in Post, 12 ga Gauge, Steel, Gray
These cast-in-place post-bases provide a secure connection to the concrete and the code-required 1 in stand-off to help prevent rot at the post-end. EPB44PHDG can be used both for pier block and cast-in-place installation for 4 x 4 posts. Added stand-off adjustability to suit...

$32.83

$32.83

Unit price

per
Vendor: SIMPSON STRONG-TIE

Simpson Strong-Tie EPCZ EPC4Z Post Cap, 4 x 4 in Post/Joist, Steel, ZMAX
The EPCZ is designed as a fast and easy post-to-beam end connection. With the post and beam flanges in line with each other, this end post cap can accommodate several post sizes. The EPCZ features a ZMAX® finish to meet exposure conditions in many...

$25.56

$25.56

Unit price

per
Vendor: SIMPSON STRONG-TIE

Simpson Strong-Tie EPCZ EPC6Z Post Cap, 6 x 6 in Post/Joist, Steel, ZMAX
The EPCZ is designed as a fast and easy post-to-beam end connection. With the post and beam flanges in line with each other, this end post cap can accommodate several post sizes. The EPCZ features a ZMAX® finish to meet exposure conditions in many...

$46.72

$46.72

Unit price

per
Vendor: SIMPSON STRONG-TIE

Simpson Strong-Tie FB FB24Z Fence Bracket, 1-9/16 in W, 20 ga Thick Material, Steel, ZMAX
The FB is designed for connecting fence rails to posts. The simple design of this fence rail bracket provides strong connections without the need for toe nails or screws. The versatility of the FB makes planning and building fences, deck/porch railings and louvers fast...

$0.90

$0.90

Unit price

per
Vendor: SIMPSON STRONG-TIE

Simpson Strong-Tie FB FB26 Fence Bracket, 1-9/16 in W, 18 ga Thick Material, Steel, Galvanized
The FB is designed for connecting fence rails to posts. The simple design of this fence rail bracket provides strong connections without the need for toe nails or screws. The versatility of the FB makes planning and building fences, deck/porch railings and louvers fast...

$2.70

$2.70

Unit price

per
Vendor: SIMPSON STRONG-TIE

Simpson Strong-Tie FBR FBR24Z Fence Bracket, 1-9/16 in W, 18 ga Thick Material, Steel, ZMAX®; Galvanized
The FBR is designed to make connections between fence rails and posts. The design of this fence bracket provides strong, simple connections without the need for toe nails or screws. The versatility of the FBR makes planning and building fences, deck/porch railings and louvers...

$1.54

$1.54

Unit price

per
Vendor: SIMPSON STRONG-TIE

Simpson Strong-Tie FPBB44 Post Base, 4 x 4 in Post, 12 ga Gauge, Steel, Black, Powder-Coated
The E-Z Base is part of a Simpson Strong-Tie® line of products designed to help make reinforcing fence posts simple and economical. The E-Z product line offers solutions for a variety of fence post projects. This retrofit post-base allows easy installation of 4 x...

$30.79

$30.79

Unit price

per
Vendor: SIMPSON STRONG-TIE

Simpson Strong-Tie FPBS44 Fence Post Spike, 12 ga Gauge, Steel, Black, Powder-Coated
The E-Z Spike is part of a Simpson Strong-Tie® line of products designed to help make reinforcing fence posts simple and economical. The E-Z product line offers solutions for a variety of fence post projects. This post-base allows for easy installation of 4 x...

$35.43

$35.43

Unit price

per
Vendor: SIMPSON STRONG-TIE

Simpson Strong-Tie FRFP Retrofit Foundation Plate, 7 ga Gauge, Steel, Galvanized/Zinc
The FRFP is designed to connect the mudsill to the foundation and provide lateral load resistance. This flat retrofit foundation plate features a design that allows the designer to maintain prescriptive requirements. The FRFP can be used by filling the three round holes or...

$22.79

$22.79

Unit price

per
Vendor: SIMPSON STRONG-TIE

Simpson Strong-Tie GA GA1 Gusset Angle, 2-3/4 in H, Steel, Galvanized/Zinc
The GA angle is a small, versatile angle designed to improve corner stability. The engineered and tested gusset in the angle increases strength for lateral and uplift loads. The GA installs easily with nails, or for increased loads, with Strong-Drive® SD Connector screws. Small...

$1.04

$1.04

Unit price

per
Vendor: SIMPSON STRONG-TIE

Simpson Strong-Tie GA GA2 Gusset Angle, 3-1/4 in H, Steel, Galvanized/Zinc
The GA angle is a small, versatile angle designed to improve corner stability. The engineered and tested gusset in the angle increases strength for lateral and uplift loads. The GA installs easily with nails, or for increased loads, with Strong-Drive® SD Connector screws. Small...

$1.35

$1.35

Unit price

per
Vendor: SIMPSON STRONG-TIE

Simpson Strong-Tie H10A H10A2 Hurricane Tie, 6-9/16 in L, 6-1/4 in W, Steel, Galvanized, Fastening Method: Nail
The H10A series holds the rafter or truss on both sides for high uplift applications with embossments that add stiffness in crucial areas for improved performance. These U-shaped hurricane ties provide faster installation than using two single-sided ties. H10A models come with optional fastener...

$4.57

$4.57

Unit price

per
Vendor: SIMPSON STRONG-TIE

Simpson Strong-Tie H10A H10AZ Hurricane Tie, 5 in L, 6-1/4 in W, Steel, ZMAX, Fastening Method: Nail
The H10A series holds the rafter or truss on both sides for high uplift applications with embossments that add stiffness in crucial areas for improved performance. These U-shaped hurricane ties provide faster installation than using two single-sided ties. H10A models come with optional fastener...

$4.49

$4.49

Unit price

per
Vendor: SIMPSON STRONG-TIE

Simpson Strong-Tie H10A Hurricane Tie, 5 in L, 6-1/4 in W, Steel, Galvanized, Fastening Method: Nail
The H10A series holds the rafter or truss on both sides for high uplift applications with embossments that add stiffness in crucial areas for improved performance. These U-shaped hurricane ties provide faster installation than using two single-sided ties. H10A models come with optional fastener...

$3.87

$3.87

Unit price

per
Vendor: SIMPSON STRONG-TIE

Simpson Strong-Tie H10S Rebar Tie Wire, 11-5/8 in L, 5 in W, Steel, Galvanized, Fastening Method: Nail
The H10S attach to the truss joist and provide good uplift resistance.

$7.76

$7.76

Unit price

per
Vendor: SIMPSON STRONG-TIE

Simpson Strong-Tie H1A Hurricane Tie, 5-1/4 in L, 5-1/4 in W, Steel, Galvanized
The H1A provides a connection between the truss or rafter and the wall of the structure that helps resist wind and seismic forces. The H1A is designed for nominal 2X lumber. These U-shaped hurricane ties provide faster installation than using two single-sided ties. The...

$1.14

$1.14

Unit price

per
Vendor: SIMPSON STRONG-TIE

Simpson Strong-Tie H1AZ Hurricane Tie, 0.923 in L, 5.28 in W, Steel, Galvanized, Fastening Method: Nail
The H1A provides a connection between the truss or rafter and the wall of the structure that helps resist wind and seismic forces. The H1A is designed for nominal 2X lumber. These U-shaped hurricane ties provide faster installation than using two single-sided ties. The...

$1.53

$1.53

Unit price

per
Vendor: SIMPSON STRONG-TIE

Simpson Strong-Tie H2.5A Hurricane Tie, Silver, 6 in L, 1-3/8 in W, Steel, Galvanized, Fastening Method: Nail
The H2.5A single-sided hurricane tie is designed to resist moderate loads at the rafter/truss to-top-plate connection. As part of a continuous load path, the H2.5A resists both lateral and uplift loads. The symmetrical design eliminates the need for separate right and left parts. Embossments...

$0.69

$0.69

Unit price

per
Vendor: SIMPSON STRONG-TIE

Simpson Strong-Tie H2.5AZ Hurricane Tie, 6 in L, 1-3/8 in W, Steel, ZMAX, Fastening Method: Nail
The H2.5A single-sided hurricane tie is designed to resist moderate loads at the rafter/truss to-top-plate connection. As part of a continuous load path, the H2.5A resists both lateral and uplift loads. The symmetrical design eliminates the need for separate right and left parts. Embossments...

$1.05

$1.05

Unit price

per
Vendor: SIMPSON STRONG-TIE

Simpson Strong-Tie H2.5T Hurricane Tie, 6.38 in L, 1-1/4 in W, Steel, Galvanized/Zinc
The H2.5T single-sided hurricane tie is designed to resist moderate loads at the rafter/truss to-top-plate connection. As part of a continuous load path, the H2.5T resists both lateral and uplift loads. H2.5T ties are available in left and right-hand models and can be installed...

$0.69

$0.69

Unit price

per
Vendor: SIMPSON STRONG-TIE

Simpson Strong-Tie H2A H2AZ Hurricane Tie, 10.438 in L, 1.531 in W, Steel, Galvanized
The H2A single-sided hurricane tie makes a direct connection between the rafter or truss, the top-plates and the wall studs. A value-added solution for high-wind applications, it is designed to resist uplift and lateral loads. By capturing all three framing members, the H2A eliminates...

$4.39

$4.39

Unit price

per
Vendor: SIMPSON STRONG-TIE

Simpson Strong-Tie H3 Hurricane Tie, 4-5/8 in L, 1-9/16 in W, Steel, Galvanized, Fastening Method: Nail
The H3 single-sided hurricane tie is designed to resist moderate loads at the rafter/truss to-top-plate connection. As part of a continuous load path, the H3 resists both lateral and uplift loads. H3 ties are available in left and right-hand models and can be installed...

$1.14

$1.14

Unit price

per
Vendor: SIMPSON STRONG-TIE

Simpson Strong-Tie H8 H8Z Hurricane Tie, 8 in L, 1-1/4 in W, Steel, ZMAX, Fastening Method: Nail
The H8 single-sided hurricane tie is designed to resist moderate loads at the top of a wall connection. Provides a connection as part of a continuous load path to resist wind and seismic forces. The H8 is versatile and has been tested for connecting...

$1.66

$1.66

Unit price

per
Vendor: SIMPSON STRONG-TIE

Simpson Strong-Tie H8 Hurricane Tie, 8 in L, 1-1/4 in W, Steel, Galvanized, Fastening Method: Nail
The H8 single-sided hurricane tie is designed to resist moderate loads at the top of a wall connection. Provides a connection as part of a continuous load path to resist wind and seismic forces. The H8 is versatile and has been tested for connecting...

$1.05

$1.05

Unit price

per
Vendor: SIMPSON STRONG-TIE

Simpson Strong-Tie HDU HDU11-SDS2.5 Holdown, 22-1/4 in L, 3 in W, Steel, Galvanized
The HDU is designed for use in shearwalls and braced-wall panels, as well as other lateral applications in wood construction. The HDU uses Strong-Drive® SDS heavy-duty connector screws which install easily, reduce fastener slip and provide a greater net section than bolts. Predeflected body...

$76.72

$76.72

Unit price

per
Vendor: SIMPSON STRONG-TIE

Simpson Strong-Tie HDU HDU2-SDS2.5 Holdown, 8-11/16 in L, 3 in W, Steel, Galvanized
The HDU is designed for use in shearwalls and braced-wall panels, as well as other lateral applications in wood construction. The HDU uses Strong-Drive® SDS heavy-duty connector screws which install easily, reduce fastener slip and provide a greater net section than bolts. Predeflected body...

$32.02

$32.02

Unit price

per
Vendor: SIMPSON STRONG-TIE

Simpson Strong-Tie HDU HDU4-SDS2.5 Holdown, 10-15/16 in L, 3 in W, Steel, Galvanized
The HDU is designed for use in shearwalls and braced-wall panels, as well as other lateral applications in wood construction. The HDU uses Strong-Drive® SDS heavy-duty connector screws which install easily, reduce fastener slip and provide a greater net section than bolts. Predeflected body...

$40.83

$40.83

Unit price

per
Vendor: SIMPSON STRONG-TIE

Simpson Strong-Tie HDU HDU5-SDS2.5 Holdown, 13-3/16 in L, 3 in W, Steel, Galvanized
The HDU is designed for use in shearwalls and braced-wall panels, as well as other lateral applications in wood construction. The HDU uses Strong-Drive® SDS heavy-duty connector screws which install easily, reduce fastener slip and provide a greater net section than bolts. Predeflected body...

$42.73

$42.73

Unit price

per
Vendor: SIMPSON STRONG-TIE

Simpson Strong-Tie HDU HDU8-SDS2.5 Holdown, 16-5/8 in L, 3 in W, Steel, Galvanized
The HDU is designed for use in shearwalls and braced-wall panels, as well as other lateral applications in wood construction. The HDU uses Strong-Drive® SDS heavy-duty connector screws which install easily, reduce fastener slip and provide a greater net section than bolts. Predeflected body...

$63.53

$63.53

Unit price

per
Vendor: SIMPSON STRONG-TIE

Simpson Strong-Tie HETA HETA16 Joist Hanger, 12 in H, 5-1/4 in, Steel, Galvanized, Face Mounting
The HETA embedded truss anchor series provides an engineered method to properly attach roof trusses to concrete and masonry walls. The products are designed with staggered nail patterns for greater uplift resistance. Information regarding the use of two anchors on single and multi-ply trusses...

$3.49

$3.49

Unit price

per
Vendor: SIMPSON STRONG-TIE

Simpson Strong-Tie HETA HETA20 Heavy Embedded Truss Anchor, 20 in L, Steel, Galvanized
The HETA provides an engineered method to attach roof trusses securely to concrete and masonry walls. This heavy embedded truss anchor features staggered nail patterns to strengthen uplift resistance and can be used in pairs on single and multi-ply trusses. The versatile HETA can...

$2.96

$2.96

Unit price

per
Vendor: SIMPSON STRONG-TIE

Simpson Strong-Tie HGA HGA10KT Hurricane Tie Kit, 3 ft L, 3-1/2 in W, Steel, Galvanized, Fastening Method: Screw
The HGA is designed to secure the truss to the top-plate in gable end truss connections and other framing applications. The engineered gusset in the angle increases strength for lateral and uplift loads. This hurricane gusset angle installs easily with Strong-Drive® SDS heavy-duty connector...

$88.25

$88.25

Unit price

per
Vendor: SIMPSON STRONG-TIE

Simpson Strong-Tie HGAM HGAM10KTA Masonry Gusset Angle with Screw, 3-1/2 in W, 3 in D, 3 in H, Steel
The HGAM is designed to secure the bottom chord of a gable end truss or other framing member to masonry. The engineered gusset in the angle increases strength for lateral and uplift loads. This hurricane gusset angle installs easily with 1-1/2 in Strong-Drive® SDS...

$77.71

$77.71

Unit price

per
Vendor: SIMPSON STRONG-TIE

Simpson Strong-Tie HGUS HGUS412 Joist Hanger, 10-7/16 in H, 4 in D, 3-5/8 in W, 4 x 12 in, Steel, Galvanized
Simpson Strong-Tie® HGUS hanger is a heavy-capacity joist hanger that utilizes double-shear nailing for added strength. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation and the use...

$50.58

$50.58

Unit price

per

Refined By Clear all

Product type

Brand

Availability

Price

Sort by:

Recently Viewed Products

Shop the look

Choose Options

Edit Option

Back In Stock Notification