-
Vendor: COBRA ANCHORS
Cobra Anchors 617R Sleeve Anchor, 1/2 in Dia, 2-3/4 in L, 1525 lb, Steel, Plated
Can be removed and reinstalled. Torque controlled expansion. Made of grade 5 steel, bolt increases the shear load by 30%. A masonry drill bit is included in all packs. Grade-5 steel bolt increases shear load by 30% Practical and unique, can easily be removed...- $31.73
- $31.73
- Unit price
- per
-
Vendor: COBRA ANCHORS
Cobra Anchors 193R Screw Anchor, #8-10 Thread, 1-1/4 in L, Polyethylene, 175 lb, 20/PK
The Cobra designed plastic screw anchors are one of the most universally used anchors in the hardware market. The plastic anchor has notched wings with two expansion points to prevent the anchor from rotating as the screw is inserted. Easy to install Can be...- $8.24
- $8.24
- Unit price
- per
-
Vendor: COBRA ANCHORS
Cobra Anchors 630W Screw, 1/4 in Thread, 1-1/4 in L, Flat Head, Phillips, Robertson Drive, Steel, 10/PK
The COBRATAP concrete screws are designed with a high and low thread to cut the concrete more effectively and to keep its alignment. It is made of tempered, high-grade steel to ensure the best torque and maximum holding power and is-coated with the corrosion-resistant...- $17.22
- $17.22
- Unit price
- per
-
Vendor: TAPCON
Tapcon 28395 Concrete Screw Anchor, T30 Screw, 1/4 in Dia, 3-3/4 in L, Steel, Climaseal, 75/PK
The next generation of Tapcon anchors are engineered to be installed fast and trusted for a lifetime. They're the original and still the best when it comes to concrete anchoring. Engineered for a more stable drive with no bit slip Climaseal coating for corrosion...- $32.72
- $32.72
- Unit price
- per
-
Vendor: GRK FASTENERS
GRK Fasteners PHEINOX Series 36101 Screw, 2-1/2 in L, W-Cut Thread, Recessed Star Drive, Zip-Tip Point, Steel, 365 PK
PHEINOX™ 305 stainless steel screws are corrosion and stain-resistant fasteners designed to withstand wet environments. PHEINOX™ 316 stainless steel screws are designed for coastal applications. GRK's patented R4, RSS, FIN/TRIM and RT composite screws are available in PHEINOX™ stainless steel. GRK recommends PHEINOX™ 305...- $182.70
- $182.70
- Unit price
- per
-
Vendor: GRK FASTENERS
GRK Fasteners RT Series 36077 Screw, #8 Thread, 2 in L, Trim Head, Star Drive, Stainless Steel, 600 PAIL
PHEINOXâ„¢ 305 stainless steel screws are corrosion and stain-resistant designed to withstand wet environments. Typical applications for 305 stainless are in corrosive environments such as lakes, pools, spas, decks and boardwalks. Compatible with most wood types including cedar, redwood and ipe. Corrosion resistance for...- $173.34
- $173.34
- Unit price
- per
-
Vendor: GRK FASTENERS
GRK Fasteners PHEINOX Series 37730 Screw, #8 Thread, 2-1/2 in L, Coarse Thread, Round Head, Star Drive, Stainless Steel
PHEINOXâ„¢ 305 stainless steel screws are corrosion and stain-resistant designed to withstand wet environments. Typical applications for 305 stainless are in corrosive environments such as lakes, pools, spas, decks and boardwalks. Compatible with most wood types including cedar, redwood and ipe. Corrosion resistance for...- $33.97
- $33.97
- Unit price
- per
-
Vendor: MIDWEST FASTENER
Midwest Fastener 05627 Washer, 3/8 in ID, Galvanized Steel, USS Grade
Midwest Fastener Washer, Flat, 3/8 in Dia Inside, USS Grade, Galvanized Steel- $49.99
- $49.99
- Unit price
- per
-
Vendor: GRK FASTENERS
GRK Fasteners PHEINOX Series 36079 Screw, 2-1/2 in L, W-Cut Thread, Recessed Star Drive, Zip-Tip Point, Steel, 500 PK
PHEINOX™ 305 stainless steel screws are corrosion and stain-resistant fasteners designed to withstand wet environments. PHEINOX™ 316 stainless steel screws are designed for coastal applications. GRK's patented R4, RSS, FIN/TRIM and RT composite screws are available in PHEINOX™ stainless steel. GRK recommends PHEINOX™ 305...- $188.86
- $188.86
- Unit price
- per
-
Vendor: GRK FASTENERS
GRK Fasteners PHEINOX 67728 Screw, 2 in L, W-Cut Thread, Recessed Star Drive, Zip-Tip Point, Steel, 100 PK
GRK Fasteners PHEINOX Screw, 2 in Length, W-Cut Thread, Recessed Star Drive, Zip-Tip Point, Steel, 305 Stainless Steel, Package Quantity: 100 PK, T10 Drive, Applicable Materials: Cedar, Redwood, Specialty Hardwood, Includes: T-10 Bit Recessed star drive for zero stripping, with six points of contact...- $30.91
- $30.91
- Unit price
- per
-
Vendor: GRK FASTENERS
GRK Fasteners 37724 Screw, 1-1/2 in L, Trim Head, Stainless Steel
GRK Fasteners Screw, 1-1/2 in L, Head Type: Trim, Stainless Steel, Includes: T-10 Bit- $29.91
- $29.91
- Unit price
- per
-
Vendor: COBRA ANCHORS
Cobra Anchors 360R Driller Toggle Bolt, 2 in L, Zinc, Chrome Zinc, 90 lb, 6/PK
The DrillerToggle® provides the holding power of a toggle bolt with the ease of installation of a WallDriller®. The toggle action supplies extra holding power in drywall, while its self-drilling tip eliminates all the extra hassles and messes of installing a regular toggle anchor....- $10.24
- $10.24
- Unit price
- per
-
Vendor: COBRA ANCHORS
Cobra Anchors 622J Screw, 3/16 in Thread, 2-1/4 in L, Flat Head, Phillips, Robertson Drive, Steel, 25/PK
The COBRATAP concrete screws are designed with a high and low thread to cut the concrete more effectively and to keep its alignment. It is made of tempered, high-grade steel to ensure the best torque and maximum holding power and is-coated with the corrosion-resistant...- $26.55
- $26.55
- Unit price
- per
-
Vendor: MIDWEST FASTENER
Midwest Fastener 05509 Carriage Bolt, 3/8-16 in Thread, NC Thread, 5 in OAL, 2 Grade
Midwest Fastener Carriage Bolt, 2 Grade, Thread Type: NC, Thread Size: 3/8-16 in, Head Type: Round, 5 in OAL- $57.99
- $57.99
- Unit price
- per
-
Vendor: GRK FASTENERS
GRK Fasteners 37734 Screw, 3-1/8 in L, Trim Head, Stainless Steel, 100 PK
GRK Fasteners Screw, 3-1/8 in L, Head Type: Trim, Stainless Steel, Package Quantity: 100 PK, Includes: T10 Bit- $51.56
- $51.56
- Unit price
- per
-
Vendor: MIDWEST FASTENER
Midwest Fastener 05618 Hex Nut, Coarse Thread, 1/2-13 Thread, Galvanized
Midwest Fastener Hex Nut, Thread Type: Coarse, Thread Size: 1/2-13, Galvanized- $19.99
- $19.99
- Unit price
- per
-
Vendor: COBRA ANCHORS
Cobra Anchors 752S Hollow Wall Anchor, 2-1/4 in L, Nylon, 85 lb
The WallGripper® is the only expandable screw-in anchor on the market. It expands and grips behind the drywall and it is twice as strong as a regular screw-in anchor. Its patented design offers the ultimate holding power without any pre-drilling. Its unique body design...- $7.40
- $7.40
- Unit price
- per
-
Vendor: MIDWEST FASTENER
Midwest Fastener 05570 Lag Screw, 5/16-9 Thread, 3 in OAL, 2 Grade, Galvanized Steel, SAE Measuring
Midwest Fastener Lag Screw, Measuring Type: SAE, Galvanized Steel, 2 Grade, Thread Size: 5/16-9, 3 in OAL- $65.99
- $65.99
- Unit price
- per
-
Vendor: COBRA ANCHORS
Cobra Anchors 495R Wedge Anchor, 3/8 in Dia, 2-3/4 in L, 604 lb, Steel, Plated
The Parawedge™ anchor stud is cold formed and consists of a threaded section with standard coarse bolt threads at one end and a parabolic shaped taper mandrel neck at the opposite end for a smoother expansion. It has a 360 deg clip for more...- $17.98
- $17.98
- Unit price
- per
-
Vendor: TEKS
Teks 21352 Screw, #14 Thread, 1-1/2 in L, Coarse Thread, Hex Drive, Self-Drilling, Self-Tapping Point, Steel, Zinc
Teks® fasteners are offered in sharp and drill points that easily penetrate light to heavy-gauge metal and wood. Professionals no longer have to struggle when engaging their work surface. The self-tapping threads are designed to tap holes while providing great holding power ensuring strong...- $13.72
- $13.72
- Unit price
- per
-
Vendor: COBRA ANCHORS
Cobra Anchors WallDriller 029S Hollow Wall Anchor, Nylon, 63 lb
The WallDriller® is designed to offer the maximum holding power in drywall material. Its fine centered point helps guide the anchor into the wall with flawless precision. A sharp profile thread cuts deeply into the hole without damaging the drywall, ensuring maximum holding power...- $4.66
- $4.66
- Unit price
- per
-
Vendor: PRO-FIT
ProFIT 0333138G Screw, #8 Thread, 2 in L, Coarse Thread, Bugle Head, Star Drive, Sharp Point, Steel, Yellow Zinc, 1 lb
ProFIT Screw, Thread Size: #8, 2 in L, Thread Type: Coarse, Head Type: Bugle, Drive Type: Star, Point Type: Sharp, Steel, Yellow Zinc, Package Quantity: 1 lb, Multi-Purpose, Gold, Applicable Materials: Drywall- $10.91
- $10.91
- Unit price
- per
-
Vendor: TEKS
Teks 21406 Roofing Screw, #9 Thread, Coarse Thread, Hex Drive, Self-Tapping, Sharp Point, Steel, Zinc
For corrugated panels to metal. Approved for treated lumber. Drive surface and recess reduces cam-outs to prevent slipping during installation Sharp points self-pierces into light gauge metal to start drilling faster Corrosion-resistant finish protects the job's appearance with long lasting coating Roofing screws feature...- $57.83
- $57.83
- Unit price
- per
-
Vendor: PRO-FIT
ProFIT 314108 Screw, #9 Thread, 1-5/8 in L, High-Low Thread, Star Drive, Ceramic
ProFIT Screw, #9 Thread, 1-5/8 in Length, High-Low Thread, Star Drive, Ceramic, Applicable Materials: Cement, Wood Hi-Lo thread for attaching drywall to light gauge steel or wood studs, this type also provides higher resistance to strip-out- $15.94
- $15.94
- Unit price
- per
-
Vendor: COBRA ANCHORS
Cobra Anchors 197R Screw Anchor, #12-14 Thread, 1-1/2 in L, Polyethylene, 200 lb, 10/PK
The Cobra designed plastic screw anchors are one of the most universally used anchors in the hardware market. The plastic anchor has notched wings with two expansion points to prevent the anchor from rotating as the screw is inserted. Easy to install Can be...- $8.38
- $8.38
- Unit price
- per
-
Vendor: TEKS
Teks 21408 Roofing Screw, #12 Thread, Fine Thread, Hex Drive, Drill Point, Steel, Zinc
Self-sealing neoprene washer for waterproof applications. Premium finish provides exceptional corrosion resistance in harsh outdoor environments. For metal-to-metal (26-22 ga) or metal-to-wood applications. Applications - attaching roofing and wall panels to steel framing, roofing panels over insulation to wood structure, pole barn construction. Drive...- $17.76
- $17.76
- Unit price
- per
-
Vendor: SIMPSON STRONG-TIE
Simpson Strong-Tie S07162FB1 Deck Screw, #7 Thread, 1-5/8 in L, Coarse Thread, Square Drive, Type 17 Point, Trim Head
Deep countersunk heads and slender shanks for finish work and trim applications. Easily driven flush with or below the work surface. Ideal for fastening corner boards, fascia and mitered ends on wood siding jobs. Beaver bite type 17 auger point for extra fast starts....- $30.28
- $30.28
- Unit price
- per
-
Vendor: ACORN INTERNATIONAL
Acorn International SW-MM1412W250 Screw, #14 Thread, Hex Drive, Self-Drilling, Self-Tapping Point, Steel, 250 BAG
Metal-to-metal screws are sealing self-drilling tapping screws made from Steel, case hardened for roofing and siding applications. The screw drills its own hole, forms mating threads and makes a complete secure fastening in a single operation. Acorn International metal to metal screws have a...- $54.68
- $54.68
- Unit price
- per
-
Vendor: COBRA ANCHORS
Cobra Anchors 173S Wall Anchor, 1-1/4 in L, Polyethylene, 61 lb
The TripleGrip® is one of the most technologically advanced anchor on the market. It is designed with two expandable wings that grip tightly behind the drywall for a maximum holding power. Its advanced cam-action technology expands; thereby creating an additional pressure against the side...- $4.17
- $4.17
- Unit price
- per
-
Vendor: MIDWEST FASTENER
Midwest Fastener 05556 Lag Screw, 1/4-10 Thread, 1-1/2 in OAL, 2 Grade, Galvanized Steel, SAE Measuring
Midwest Fastener Lag Screw, Measuring Type: SAE, Galvanized Steel, 2 Grade, Thread Size: 1/4-10, 1-1/2 in OAL- $26.99
- $26.99
- Unit price
- per
-
Vendor: PRO-FIT
ProFIT 0280058 Screw, #6 Thread, 1 in L, Fine Thread, Bugle Head, Phillips Drive, Sharp Point, Phosphate-Coated, 329 BX
Drywall screws are used for attaching drywall to wood or metal studs. ProFIT® drywall Screws come in four basic styles - coarse thread, fine thread, self-drill and trim head - and are available in bugle head or trim head with Phillip's or square drives...- $7.31
- $7.31
- Unit price
- per
-
Vendor: MIDWEST FASTENER
Midwest Fastener 07668 Machine Screw, #8-32 Thread, Coarse Thread, Round Head, Combo Drive, Steel, Zinc, 100 PK
Midwest Fastener Machine Screw, Thread Size: #8-32, Thread Type: Coarse, Head Type: Round, Drive Type: Combo, Steel, Zinc, Package Quantity: 100 PK, Length Under Head: 2 in- $12.99
- $12.99
- Unit price
- per
-
Vendor: PRO-FIT
ProFIT 0333178G Screw, #9 Thread, 3 in L, Coarse Thread, Bugle Head, Star Drive, Sharp Point, Steel, Yellow Zinc, 1 lb
ProFIT Screw, Thread Size: #9, 3 in L, Thread Type: Coarse, Head Type: Bugle, Drive Type: Star, Point Type: Sharp, Steel, Yellow Zinc, Package Quantity: 1 lb, Multi-Purpose, Gold, Applicable Materials: Drywall- $10.91
- $10.91
- Unit price
- per
-
Vendor: COBRA ANCHORS
Cobra Anchors 162Y Hollow Wall Anchor, #6-32 Thread, Steel, Plated
Simply taps into drywall, no pre-drilling, vibration resistant. The hollow wall drive anchor is made entirely of steel and is vibration-resistant No pre-drilling, just tap the anchor through with a hammer The screw head adapts to Philips or square or slot bits Faster result...- $8.83
- $8.83
- Unit price
- per
-
Vendor: COBRA ANCHORS
Cobra Anchors 632J Screw, 1/4 in Thread, 2-1/4 in L, Flat Head, Phillips, Robertson Drive, Steel, 25/PK
The COBRATAP concrete screws are designed with a high and low thread to cut the concrete more effectively and to keep its alignment. It is made of tempered, high-grade steel to ensure the best torque and maximum holding power and is-coated with the corrosion-resistant...- $34.80
- $34.80
- Unit price
- per
-
Vendor: SENCO
Senco 08D Series 08D250S Deck Screw, Flat Head, #2 Drive, Stainless Steel, Stainless Steel
50 screws per flat strip. Thread coarse 2/3 with wax. Fits DS425AC (557.4827), DS440AC (557.4876), DS312-18V (305.6512) tools. Square recess provides excellent torque transmission for high torque applications Flat head provides strong holding power for most wood applications 2/3 thread prevents gaps between the...- $238.28
- $238.28
- Unit price
- per
-
Vendor: PRO-FIT
ProFIT 297158/0281158 Deck Screw, #9 Thread, 2-1/2 in L, Coarse Thread, Bugle Head, Combo Drive, Sharp Point, Gray
Use for exterior deck and railing projects where rust resistance is important. Passes 1000 hrs in salt spray testing- $14.78
- $14.78
- Unit price
- per
-
Vendor: GRK FASTENERS
GRK Fasteners RSS 11137 Structural Screw, 3-1/8 in L, W-Cut Thread, Washer Head, Recessed Star Drive, Zip-Tip Point
GRK's RSS™ rugged structural screw is made of specially hardened steel to provide you with high tensile, torque and shear strength. The sharp threads and points bite instantly into the material (including hardwood), reducing the splitting effect due to smaller shanks. RSS™ screws which...- $89.06
- $89.06
- Unit price
- per
-
Vendor: TEKS
Teks 21328 Screw, #10 Thread, 1 in L, Coarse Thread, Hex Drive, Self-Drilling, Self-Tapping Point, Steel, Zinc, 140 PK
Teks® fasteners are offered in sharp and drill points that easily penetrate light to heavy-gauge metal and wood. Professionals no longer have to struggle when engaging their work surface. The self-tapping threads are designed to tap holes while providing great holding power ensuring strong...- $13.72
- $13.72
- Unit price
- per
-
Vendor: MIDWEST FASTENER
Midwest Fastener 10421 Wall Anchor with Screw, #8 Thread, 1-1/4 in L, Plastic
Midwest Fastener Wall Anchor with Screw, Thread Size: #8, 1-1/4 in L, Plastic- $9.99
- $9.99
- Unit price
- per
-
Vendor: COBRA ANCHORS
Cobra Anchors 085Y Spring Toggle Bolt, 2 in L, Steel, 95 lb, 3/PK
The Spring Toggle Bolt is a toggle anchor made of steel and is ideal for fixing heavy items to the wall or ceiling. It is offered in a variety of lengths to accommodate thicker material. The two metal wings are spring loaded and open...- $5.98
- $5.98
- Unit price
- per
-
Vendor: COBRA ANCHORS
Cobra Anchors Lag Shield 243S Masonry Anchor, 276 lb, 5/16 in Screw, Zinc, 600 psi Tensile Strength, 2/PK
Can be used in all types of masonry. Corrosion resistant. It is internally threaded and installs flush to surface. Zinc anchor with internal thread for lag bolt Installs flush to surface Lag screw shield is a corrosion-resistant masonry anchor with the best expansion- $6.77
- $6.77
- Unit price
- per
-
Vendor: COBRA ANCHORS
Cobra Anchors 172R Wall Anchor, 1-1/4 in L, Polyethylene, 46 lb
The TripleGrip® is one of the most technologically advanced anchor on the market. It is designed with two expandable wings that grip tightly behind the drywall for a maximum holding power. Its advanced cam-action technology expands; thereby creating an additional pressure against the side...- $9.02
- $9.02
- Unit price
- per
-
Vendor: TEKS
Teks 21524 Lath Screw, #8 Thread, 1.63 in L, Truss Head, Phillips Drive, Drill Point, Steel, Zinc, 200 PK
Teks® fasteners are the leading choice of self-tapping screws for use in interior or exterior applications. Professionals are able to drill faster with less force even in heavy-gauge metal. The self-tapping threads are designed to tap holes while providing great holding power ensuring strong...- $14.97
- $14.97
- Unit price
- per
-
Vendor: COBRA ANCHORS
Cobra Anchors 082M Spring Toggle Bolt, 3 in L, Steel, 68 lb, 30/PK
The Spring Toggle Bolt is a toggle anchor made of steel and is ideal for fixing heavy items to the wall or ceiling. It is offered in a variety of lengths to accommodate thicker material. The two metal wings are spring loaded and open...- $30.24
- $30.24
- Unit price
- per
-
Vendor: MIDWEST FASTENER
Midwest Fastener 05567 Lag Screw, 5/16 in Thread, 2 Grade, Galvanized
Midwest Fastener Lag Screw, 2 Grade, Galvanized, Thread Size: 5/16 in, Thread Length: 1-1/2 in- $35.99
- $35.99
- Unit price
- per
-
Vendor: MIDWEST FASTENER
Midwest Fastener 05506 Carriage Bolt, 3/8-16 in Thread, NC Thread, 3-1/2 in OAL, 2 Grade
Midwest Fastener Carriage Bolt, 2 Grade, Thread Type: NC, Thread Size: 3/8-16 in, Head Type: Round, 3-1/2 in OAL- $42.99
- $42.99
- Unit price
- per
-
Vendor: COBRA ANCHORS
Cobra Anchors 360S Driller Toggle Bolt, 2 in L, Zinc, Chrome Zinc, 90 lb, 2/PK
The DrillerToggle® provides the holding power of a toggle bolt with the ease of installation of a WallDriller®. The toggle action supplies extra holding power in drywall, while its self-drilling tip eliminates all the extra hassles and messes of installing a regular toggle anchor....- $4.25
- $4.25
- Unit price
- per
Sidebar
Recently Viewed Products
1
/
of
20
- Choosing a selection results in a full page refresh.