-
Vendor: MIDWEST FASTENER
Midwest Fastener 05557 Lag Screw, 1/4-10 Thread, 2 in OAL, 2 Grade, Galvanized Steel, SAE Measuring
Midwest Fastener Lag Screw, Measuring Type: SAE, Galvanized Steel, 2 Grade, Thread Size: 1/4-10, 2 in OAL- $31.99
- $31.99
- Unit price
- per
-
Vendor: COBRA ANCHORS
Cobra Anchors 137Y Hollow Wall Anchor, #6-32 Thread, Steel, Plated, 90 lb
Pre-assembled unit. Three head styles of screws available. Sizes available from 1/8 in extra short to 1/4 in extra long. The hollow wall drive anchor is made entirely of steel and is vibration-resistant The screw head adapts to Philips or square or slot bits...- $8.83
- $8.83
- Unit price
- per
-
Vendor: TAPCON
Tapcon 24293 Screw Anchor, Hex Drive, Steel, Metallic, 15 PK
Secure attachment to concrete, block and brick. One-piece design requires no assembly, does not require anchor torque-down, cracked and seismic approved. Blue ClimaSeal adds corrosion-resistance. ANSI drill bit required. Great holding strength Corrosion-resistance and long-lasting performance due to the innovative Climaseal blue coating The...- $22.33
- $22.33
- Unit price
- per
-
Vendor: TAPCON
Tapcon 24230 Concrete Screw Anchor, 1/4 in Dia, 2-3/4 in L, Hex Head, Steel, Climaseal, 25/PK
Tapcon screw anchors have enabled professionals to get their light to medium-duty concrete anchoring jobs done right the first time, every time. Designed to deliver 30% less torque and 20% more holding power. Designed to deliver superior holding power in all forms of masonry...- $19.79
- $19.79
- Unit price
- per
-
Vendor: TAPCON
Tapcon 28250 Concrete Screw Anchor, 3/16 in Dia, 1-1/4 in L, Steel
Tapcon Concrete Screw Anchor, 3/16 in Dia, 1-1/4 in L, Drill Size: 5/32 in, Head Type: Flat, Drive Type: Star, Steel, Blue- $10.02
- $10.02
- Unit price
- per
-
Vendor: SIMPSON STRONG-TIE
Simpson Strong-Tie S10300DBB Screw, #10 Thread, 3 in L, Coarse Thread, Bugle Head, Type 17 Point, Steel
Coarse threads approximately 2/3 up shank draw board tightly to substrate. Pre-drilling always recommended and a must near board ends to prevent splits. 0.344 in Dia, #2 square drive bugle head. 'Beaver Bite' type 17 auger point for extra fast starts. For pressure-treated lumber....- $338.96
- $338.96
- Unit price
- per
-
Vendor: SIMPSON STRONG-TIE
Simpson Strong-Tie T10300DWP Deck Screw, #10 Thread, 3 in L, Box Thread, Flat Head, 6-Lobe Drive, Stainless Steel
The Deck-Driveâ„¢ DWP wood SS screw is a powerful fastening solution for deck, dock and general exterior applications where extra-corrosion protection is needed. With its specially-designed sharp point and unique box threads, the DWP is ideally suited for the majority of wood used in...- $36.84
- $36.84
- Unit price
- per
-
Vendor: SIMPSON STRONG-TIE
Simpson Strong-Tie T10300WPP Deck Screw, #10 Thread, 3 in L, Box Thread, Flat Head, Steel, Stainless Steel, 350/PK
The Deck-Drive™ DWP wood SS screw is a powerful fastening solution for deck, dock and general exterior applications where extra-corrosion protection is needed. With its specially-designed sharp point and unique box threads, the DWP is ideally suited for the majority of wood used in...- $153.64
- $153.64
- Unit price
- per
-
Vendor: PRO-FIT
ProFIT 0286109 Screw, #6 Thread, 1-5/8 in L, Coarse Thread, Bugle Head, Phillips Drive, Phosphate, Sharp Point
Use for drywall to wood studs and all-purpose wood fastening. Coarse threads provide good holding power in wood Buglehead with Phillips drive- $57.60
- $57.60
- Unit price
- per
-
Vendor: CAMO
Camo 345148 Deck Screw, #7 Thread, 2-3/8 in L, Trim Head, Star Drive, Carbon Steel, ProTech-Coated, 350/PK
Camo® Deck screws create a beautiful, fastener-free deck surface. Easy-to-install using either Marksman® tool, Camo® secures deck boards directly to the joist to reduce board movement and they back out easily in the event a board needs to be replaced. No pre-drilling is required...- $46.59
- $46.59
- Unit price
- per
-
Vendor: TAPCON
Tapcon 28360 Concrete Screw Anchor, T25 Screw, 3/16 in Dia, 2-1/4 in L, Steel, Climaseal, 75/PK
The next generation of Tapcon anchors are engineered to be installed fast and trusted for a lifetime. They're the original and still the finest when it comes to concrete anchoring. Engineered for a more stable drive with no bit slip Climaseal coating for corrosion...- $22.63
- $22.63
- Unit price
- per
-
Vendor: COBRA ANCHORS
Cobra Anchors 619R Sleeve Anchor, 1/2 in Dia, 3-3/4 in L, 1525 lb, Steel, Plated
Can be removed and reinstalled. Torque controlled expansion. Made of grade 5 steel, bolt increases the shear load by 30%. A masonry drill bit is included in all packs. Grade-5 steel bolt increases shear load by 30% Practical and unique, can easily be removed...- $34.96
- $34.96
- Unit price
- per
-
Vendor: ACORN INTERNATIONAL
Acorn International SW-MW1LG250 Screw, High-Low, Twin Lead Thread, Hex Drive, Self-Tapping, Light Gray, 250/BAG
#9-15 Metal-to-wood screws are sealing self-piercing tapping screws made from heat treated Steel, case hardened for roofing and siding applications. A 1/4 in across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for...- $25.27
- $25.27
- Unit price
- per
-
Vendor: ACORN INTERNATIONAL
Acorn International SW-MW1W250 Screw, #9 Thread, High-Low, Twin Lead Thread, Hex Drive, Self-Tapping, White, 250/BAG
#9-15 Metal-to-wood screws are sealing self-piercing tapping screws made from heat treated Steel, case hardened for roofing and siding applications. A 1/4 in across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for...- $25.27
- $25.27
- Unit price
- per
-
Vendor: EMSER TILE
Emser Tile Empervious Series ZGBSW100 Screws and Washer, For: Empervious Shower System
Rust-free screws and tabbed washers are used to secure Empervious foam board to walls and ceilings.- $29.33
- $29.33
- Unit price
- per
-
Vendor: MIDWEST FASTENER
Midwest Fastener 05594 Lag Screw, 1/2 in Thread, 3 in OAL, 2 Grade, Galvanized
Midwest Fastener Lag Screw, 2 Grade, Galvanized, 1/2 in Thread, 3 in Overall Length- $71.99
- $71.99
- Unit price
- per
-
Vendor: SENCO
Senco 06A Series 06A162P Screw, #6 Thread, 1-5/8 in L, Bugle Head, #2 Drive, Steel, Phosphate
50 screws per flat strip. Gray phosphate finish. For drywall to wood. Compatible with DS235AC (264.0712), DS232AC (264.0670), DS215-18V (264.0654), DS212-18V (264.0662). Phillips recess provides smooth engagement with moderate torque transmission Bugle head provides consistent penetration without damaging the paper Coarse threads are ideal...- $38.30
- $38.30
- Unit price
- per
-
Vendor: PRO-FIT
ProFIT 0286158 Screw, #8 Thread, 2-1/2 in L, Coarse Thread, Bugle Head, Phillips Drive, Sharp Point, Phosphate, 116/BX
Use for drywall to wood studs and all-purpose wood fastening. Coarse threads provide good holding power in wood Phosphate-coated to reduce friction during installation and increase corrosion protection- $6.49
- $6.49
- Unit price
- per
-
Vendor: COBRA ANCHORS
Cobra Anchors Lag Shield 253S Masonry Anchor, 276 lb, 5/16 in Screw, Zinc, 2/PK
Can be used in all types of masonry. Corrosion resistant. It is internally threaded and installs flush to surface. Zinc anchor with internal thread for lag bolt Installs flush to surface Lag screw shield is a corrosion-resistant masonry anchor with the best expansion- $7.60
- $7.60
- Unit price
- per
-
Vendor: ACORN INTERNATIONAL
Acorn International SW-MM121G250 Screw, #12 Thread, Hex Drive, Self-Tapping Point, Galvanized Steel, 250/BAG
Metal-to-metal screws are sealing self-drilling tapping screws made from C1022 steel, case hardened for roofing and siding applications. The screw drills its own hole, forms mating threads and makes a complete secure fastening in a single operation. Acorn International metal to metal screws have...- $30.58
- $30.58
- Unit price
- per
-
Vendor: ACORN INTERNATIONAL
Acorn International SW-MW2G250 Screw, #9 Thread, High-Low, Twin Lead Thread, Hex Drive, Self-Tapping, Type 17 Point
#9-15 Metal-to-wood screws are sealing self-piercing tapping screws made from heat treated C1022 steel, case hardened for roofing and siding applications. A 1/4 in across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface...- $29.61
- $29.61
- Unit price
- per
-
Vendor: ACORN INTERNATIONAL
Acorn International SW-MW2BG250 Screw, #9 Thread, High-Low, Twin Lead Thread, Hex Drive, Self-Tapping, 250/BAG
#9-15 Metal-to-wood screws are sealing self-piercing tapping screws made from heat treated Steel, case hardened for roofing and siding applications. A 1/4 in across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for...- $34.50
- $34.50
- Unit price
- per
-
Vendor: ACORN INTERNATIONAL
Acorn International SW-MW2BN250 Screw, #9 Thread, High-Low, Twin Lead Thread, Hex Drive, Self-Tapping, Brown, 250/BAG
#9-15 Metal-to-wood screws are sealing self-piercing tapping screws made from heat treated Steel, case hardened for roofing and siding applications. A 1/4 in across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for...- $34.50
- $34.50
- Unit price
- per
-
Vendor: ACORN INTERNATIONAL
Acorn International SW-MW2BK250 Screw, #9 Thread, High-Low, Twin Lead Thread, Hex Drive, Self-Tapping, Black, 250/BAG
#9-15 Metal-to-wood screws are sealing self-piercing tapping screws made from heat treated Steel, case hardened for roofing and siding applications. A 1/4 in across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for...- $34.50
- $34.50
- Unit price
- per
-
Vendor: KREG
Kreg SDK-C2W-700 Deck Screw Kit, #8 Thread, 2 in L, Coarse Thread, Pan Head, Square Drive, Self-Tapping Point, Steel
These high-quality decking screws are designed for use with the Kreg Deck Jigâ„¢ or as a general fastener for a wide variety of deck projects. With a Protec-Koteâ„¢ finish, these screws features three anti-corrosion layers that provide great protection against rust and corrosion in...- $21.60
- $21.60
- Unit price
- per
-
Vendor: COBRA ANCHORS
Cobra Anchors 042R Hollow Wall Anchor, Zinc, 63 lb, 10/PK
The WallDriller® is designed to offer the maximum holding power in drywall material. Its fine centered point helps guide the anchor into the wall with flawless precision. A sharp profile thread cuts deeply into the hole without damaging the drywall, ensuring maximum holding power...- $8.06
- $8.06
- Unit price
- per
-
Vendor: SIMPSON STRONG-TIE
Simpson Strong-Tie S07225FT1WH01 Deck Screw, #7 Thread, 2-1/4 in L, Coarse Thread, Trim Head, 6-Lobe Drive, Steel
Trim-head decking screws are available in stainless steel for great corrosion resistance in marine or high-exposure environments where PVC or composite decks are installed. Trim-head screws provide a clean finish because of their special head design and are available with painted heads in 13...- $43.10
- $43.10
- Unit price
- per
-
Vendor: MIDWEST FASTENER
Midwest Fastener 14994 Household Fastener Kit
Durable and reusable container with items such as picture hangers, anchors, push pins, cup hooks, nails, brads and screws.- $17.99
- $17.99
- Unit price
- per
-
Vendor: COBRA ANCHORS
Cobra Anchors Lag Shield 243M Masonry Anchor, 276 lb, 5/16 in Screw, Zinc, 25/PK
Can be used in all types of masonry. Corrosion resistant. It is internally threaded and installs flush to surface. Zinc anchor with internal thread for lag bolt Installs flush to surface Lag screw shield is a corrosion-resistant masonry anchor with the best expansion- $28.82
- $28.82
- Unit price
- per
-
Vendor: TEKS
Teks 21525 Lath Screw, #8 Thread, Truss Head, Phillips Drive, Self-Drilling Point, Steel, Zinc, 600 PK
Teks® Fasteners are the leading choice of self-tapping screws for use in interior or exterior applications. Professionals are able to drill faster with less force even in heavy gauge metal. The self-tapping threads are designed to tap holes while providing superior holding power ensuring...- $33.01
- $33.01
- Unit price
- per
-
Vendor: COBRA ANCHORS
Cobra Anchors 016S Hollow Wall Anchor, Nylon, 52 lb, 4/PK
The WallDriller® is designed to offer the maximum holding power in drywall material. Its fine centered point helps guide the anchor into the wall with flawless precision. A sharp profile thread cuts deeply into the hole without damaging the drywall, ensuring maximum holding power...- $3.80
- $3.80
- Unit price
- per
-
Vendor: PRO-FIT
ProFIT 0286138 Screw, #7 Thread, 2 in L, Coarse Thread, Bugle Head, Phillips Drive, Sharp Point, Phosphate, 166/BX
Use for drywall to wood studs and all-purpose wood fastening. Coarse threads provide good holding power in wood Phosphate-coated to reduce friction during installation and increase corrosion protection- $6.49
- $6.49
- Unit price
- per
-
Vendor: MIDWEST FASTENER
Midwest Fastener 10281 Screw, #10 Thread, 1-1/2 in L, Hex, Socket Drive, Self-Drilling Point, Steel, Zinc
Midwest Fastener Screw, Thread Size: #10, 1-1/2 in L, Drive Type: Hex, Socket, Point Type: Self-Drilling, Steel, Zinc, Drive Size: 5/16 in- $9.99
- $9.99
- Unit price
- per
-
Vendor: TEKS
Teks 21381 Screw with Wing, 1-4/9 in L, Flat Head, Phillips Drive, Self-Tapping Point, Steel, Zinc
For attaching wood to metal. Approved for treated lumber.- $32.83
- $32.83
- Unit price
- per
-
Vendor: TEKS
Teks 21384 Screw, #12 Thread, 2-3/4 in L, Coarse Thread, Flat Head, Phillips Drive, Self-Drilling, Self-Tapping Point
Teks® fasteners are offered in sharp and drill points that easily penetrate light to heavy-gauge metal and wood. Professionals no longer have to struggle when engaging their work surface. The self-tapping threads are designed to tap holes while providing great holding power ensuring strong...- $14.66
- $14.66
- Unit price
- per
-
Vendor: COBRA ANCHORS
Cobra Anchors 620J Screw, 3/16 in Thread, 1-1/4 in L, Flat Head, Phillips, Robertson Drive, Steel, 25/PK
The COBRATAP concrete screws are designed with a high and low thread to cut the concrete more effectively and to keep its alignment. It is made of tempered, high-grade steel to ensure the best torque and maximum holding power and is-coated with the corrosion-resistant...- $21.58
- $21.58
- Unit price
- per
-
Vendor: SENCO
Senco 08D Series 08D250W Deck Screw, Brown, 2-1/2 in L, Flat Head, #2 Drive, Steel, Weatherex, 800/PK
50 screws per flat strip. 16 strips per pail. 800 total screws per pail. Thread coarse 2/3 with wax. Fits DS425AC (557.4827), DS440AC (557.4876), DS312-18V (305.6512) tools. Square recess provides excellent torque transmission for high torque applications Flat head provides strong holding power for...- $83.69
- $83.69
- Unit price
- per
-
Vendor: GRK FASTENERS
GRK Fasteners 29212 Deck Screw, #9 Thread, 2-1/2 in L, Coarse Thread, Bugle Head, Star Drive, Steel, Polymer, 1100 PK
Deck Elite screws are designed for use in deck boards and provide a quick drive and clean finish. For use in deck boards, fencing, and deck rails. Deck Elite screws have a corrosion resistant coating to resist rust and keep decks looking like new....- $82.39
- $82.39
- Unit price
- per
-
Vendor: E-Z ANCOR
E-Z Ancor 29503 Hollow Wall Anchor, 1-1/4 in L, Zinc, Zinc, 50 lb, 4/PK
Starts easier than other self-drilling drywall anchors. No pre-drilling required; can accommodate #6 to #8 Dia screws of any length. Up to 50 lb load capacity. Drills directly into drywall or wood studs. Zinc die-cast design for maximum durability. A superior alternative to traditional...- $3.20
- $3.20
- Unit price
- per
-
Vendor: SENCO
Senco 08D Series 08D200W Deck Screw, Brown, Flat Head, #2 Drive, Steel, Weatherex, 1000/PK
50 screws per flat strip. Thread coarse 2/3 with wax. Fits DS425AC (557.4827), DS440AC (557.4876), DS312-18V (305.6512) tools. Square recess provides excellent torque transmission for high torque applications Flat head provides strong holding power for most wood applications 2/3 thread prevents gaps between the...- $79.11
- $79.11
- Unit price
- per
-
Vendor: MIDWEST FASTENER
Midwest Fastener 05530 Carriage Bolt, 1/2-13 in Thread, NC Thread, 8 in OAL, 2 Grade
Midwest Fastener Carriage Bolt, 2 Grade, Thread Type: NC, Thread Size: 1/2-13 in, Head Type: Round, 8 in OAL- $80.99
- $80.99
- Unit price
- per
-
Vendor: COBRA ANCHORS
Cobra Anchors 052S Toggle Bolt, Nylon, 50 lb
The Nylon Toggle™ is made of resistant nylon with wings that expands behind the drywall. It is therefore rustproof and very economical. Can be used in all kinds of material Corrosion-resistant- $3.84
- $3.84
- Unit price
- per
-
Vendor: ACORN INTERNATIONAL
Acorn International SW-MM1212G250 Screw, #12 Thread, Hex Drive, Self-Drilling, Self-Tapping Point, Galvanized Steel
Metal-to-metal screws are sealing self-drilling tapping screws made from C1022 steel, case hardened for roofing and siding applications. The screw drills its own hole, forms mating threads and makes a complete secure fastening in a single operation. Acorn International metal to metal screws have...- $37.10
- $37.10
- Unit price
- per
-
Vendor: TEKS
Teks 21316 Screw, #8 Thread, 1 in L, Coarse Thread, Hex Drive, Self-Drilling, Self-Tapping Point, Steel, Zinc, 170 PK
Teks® fasteners are offered in sharp and drill points that easily penetrate light to heavy gauge metal and wood. Professionals no longer have to struggle when engaging their work surface. The self-tapping threads are designed to tap holes while providing great holding power ensuring...- $13.72
- $13.72
- Unit price
- per
-
Vendor: MIDWEST FASTENER
Midwest Fastener 05585 Lag Screw, 3/8-7 Thread, 5 in OAL, 2 Grade, Galvanized Steel, SAE Measuring
Midwest Fastener Lag Screw, Measuring Type: SAE, Galvanized Steel, 2 Grade, Thread Size: 3/8-7, 5 in OAL- $65.99
- $65.99
- Unit price
- per
-
Vendor: PRO-FIT
ProFIT 0286139 Screw, #7 Thread, 2 in L, Coarse Thread, Bugle Head, Phillips Drive, Phosphate, Sharp Point
Use for drywall to wood studs and all-purpose wood fastening. Coarse threads provide good holding power in wood Buglehead with Phillips drive- $57.60
- $57.60
- Unit price
- per
Sidebar
Recently Viewed Products
1
/
of
20
- Choosing a selection results in a full page refresh.