-
Vendor: KOCH INDUSTRIES
Koch 4075301 Cotter Pin Assortment, Steel, Zinc-Plated, 555-Piece
Koch Cotter Pin Assortment, Steel, Zinc-Plated, Number of Pieces: 555, Includes: (150) 1/16 x 1 in, (150) 3/32 x 1 in, (100) 3/32 x 1-1/2 in, (75) 1/8 x 1-1/4 in, (50) 1/8 x 2 in and (30) 5/32 x 2-1/2 in Cotter Pins...- $17.31
- $17.31
- Unit price
- per
-
Vendor: CAMO
Camo 0366249 Structural Screw, 5/16 in Thread, 6 in L, Flat Head, Star Drive, Sharp Point, PROTECH Ultra 4 Coated, 250
Camo exterior fasteners are designed specifically for exterior projects. Each screw starts fast, holds strong, and is backed by a Camo warranty against rust and corrosion so you can confidently use them in all of your decking projects, substructures, landscaping, fences, pole barns and...- $278.20
- $278.20
- Unit price
- per
-
Vendor: RED HEAD
Red Head 50125 Drop-In Anchor, 3/8 in Screw, Steel, Zinc
For fastening applications in solid concrete. Contractor-grade anchors. Internally threaded. For overhead applications, transformers and meters, ceiling fans, electrical light fixtures. For fastening applications in concrete Contractor-grade anchors Internally threaded- $2.32
- $2.32
- Unit price
- per
-
Vendor: PRO-FIT
ProFIT 0282158 Deck Screw, #8 Thread, 2-1/2 in L, Coarse Thread, Bugle Head, Phillips Drive, Sharp Point
Multi-purpose screws are used for installing cabinets, drawer glides and for some interior or exterior applications. ProFIT® multi-purpose screws come in two styles - silver dacro and coarse thread - and are available in silver zinc or yellow zinc-coated for added corrosion-resistance. Coarse thread...- $13.35
- $13.35
- Unit price
- per
-
Vendor: SIMPSON STRONG-TIE
Simpson Strong-Tie S10250DB5 Screw, #10 Thread, 2-1/2 in L, Coarse Thread, Bugle Head, Square Drive, Type 17 Point, 5 lb
Coarse threads approximately 2/3 up shank draw board tightly to substrate. Pre-drilling always recommended and a must near board ends to prevent splits. 0.344 in Dia, #2 square drive bugle head. 'Beaver Bite' type 17 auger point for extra fast starts. For pressure-treated lumber....- $111.88
- $111.88
- Unit price
- per
-
Vendor: COBRA ANCHORS
Cobra Anchors 621W Screw, 3/16 in Thread, 1-3/4 in L, Flat Head, Phillips, Robertson Drive, Steel, 10/PK
The COBRATAP concrete screws are designed with a high and low thread to cut the concrete more effectively and to keep its alignment. It is made of tempered, high-grade steel to ensure the best torque and maximum holding power and is-coated with the corrosion-resistant...- $14.04
- $14.04
- Unit price
- per
-
Vendor: RED HEAD
Red Head TruBolt 03041 Wedge Anchor, 5/8 in Dia, 6 in L, Steel, Zinc
TruBolt® wedge anchors offer maximum strength and ultimate flexibility making them the PRO choice for heavy-duty anchoring. This wedge anchor features a high-strength body that is built to resist tension and shear loads and it is code approved for use in uncracked concrete per...- $26.30
- $26.30
- Unit price
- per
-
Vendor: MIDWEST FASTENER
Midwest Fastener 05584 Lag Screw, 3/8 in Thread, 4-1/2 in OAL, 2 Grade, Galvanized, SAE Measuring
Midwest Fastener Lag Screw, SAE Measuring, 2 Grade, Galvanized, 3/8 in Thread, 4-1/2 in Overall Length- $59.99
- $59.99
- Unit price
- per
-
Vendor: DEWALT
DEWALT UltraCon+ Series DFM12760 Concrete Screw Anchor, 1/4 in Dia, 1-1/4 in L, Carbon Steel, Zinc Stalgard
The UltraCon+ fastening system is a complete family of screw anchors for light to medium-duty applications in concrete, masonry block, brick and wood base materials. The UltraCon+ is fast and easy to install and provides a neat, finished appearance. The UltraCon+ screw anchor is...- $16.05
- $16.05
- Unit price
- per
-
Vendor: DEWALT
DEWALT UltraCon+ Series DFM12772 Concrete Screw Anchor, 1/4 in Dia, 4 in L, Carbon Steel, Zinc Stalgard
The UltraCon+ fastening system is a complete family of screw anchors for light to medium-duty applications in concrete, masonry block, brick and wood base materials. The UltraCon+ is fast and easy to install and provides a neat, finished appearance. The UltraCon+ screw anchor is...- $33.20
- $33.20
- Unit price
- per
-
Vendor: DEWALT
DEWALT UltraCon+ Series DFM12766 Concrete Screw Anchor, 1/4 in Dia, 2-3/4 in L, Carbon Steel, Zinc Stalgard
The UltraCon+ fastening system is a complete family of screw anchors for light to medium-duty applications in concrete, masonry block, brick and wood base materials. The UltraCon+ is fast and easy to install and provides a neat, finished appearance. The UltraCon+ screw anchor is...- $24.68
- $24.68
- Unit price
- per
-
Vendor: DEWALT
DEWALT UltraCon+ Series DFM12768 Concrete Screw Anchor, 1/4 in Dia, 3-1/4 in L, Carbon Steel, Zinc Stalgard
The UltraCon+ fastening system is a complete family of screw anchors for light to medium-duty applications in concrete, masonry block, brick and wood base materials. The UltraCon+ is fast and easy to install and provides a neat, finished appearance. The UltraCon+ screw anchor is...- $25.05
- $25.05
- Unit price
- per
-
Vendor: DEWALT
DEWALT UltraCon+ Series DFM12726 Concrete Screw Anchor, 1/4 in Dia, 2-3/4 in L, Carbon Steel, Zinc Stalgard, 100/BX
The UltraCon+ fastening system is a complete family of screw anchors for light to medium-duty applications in concrete, masonry block, brick and wood base materials. The UltraCon+ is fast and easy to install and provides a neat, finished appearance. The UltraCon+ screw anchor is...- $24.18
- $24.18
- Unit price
- per
-
Vendor: DEWALT
DEWALT UltraCon+ Series DFM12748 Concrete Screw Anchor, 3/16 in Dia, 3-1/4 in L, Carbon Steel, Zinc Stalgard
The UltraCon+ fastening system is a complete family of screw anchors for light to medium-duty applications in concrete, masonry block, brick and wood base materials. The UltraCon+ is fast and easy to install and provides a neat, finished appearance. The UltraCon+ screw anchor is...- $20.86
- $20.86
- Unit price
- per
-
Vendor: DEWALT
DEWALT UltraCon+ Series DFM12732 Concrete Screw Anchor, 1/4 in Dia, 4 in L, Carbon Steel, Zinc Stalgard, 100/BX
The UltraCon+ fastening system is a complete family of screw anchors for light to medium-duty applications in concrete, masonry block, brick and wood base materials. The UltraCon+ is fast and easy to install and provides a neat, finished appearance. The UltraCon+ screw anchor is...- $33.08
- $33.08
- Unit price
- per
-
Vendor: DEWALT
DEWALT UltraCon+ Series DFM12744 Concrete Screw Anchor, 3/16 in Dia, 2-1/4 in L, Carbon Steel, Zinc Stalgard
The UltraCon+ fastening system is a complete family of screw anchors for light to medium-duty applications in concrete, masonry block, brick and wood base materials. The UltraCon+ is fast and easy to install and provides a neat, finished appearance. The UltraCon+ screw anchor is...- $15.75
- $15.75
- Unit price
- per
-
Vendor: DEWALT
DEWALT UltraCon+ Series DFM12740 Concrete Screw Anchor, 3/16 in Dia, 1-1/4 in L, Carbon Steel, Zinc Stalgard
The UltraCon+ fastening system is a complete family of screw anchors for light to medium-duty applications in concrete, masonry block, brick and wood base materials. The UltraCon+ is fast and easy to install and provides a neat, finished appearance. The UltraCon+ screw anchor is...- $12.86
- $12.86
- Unit price
- per
-
Vendor: DEWALT
DEWALT UltraCon+ Series DFM12742 Concrete Screw Anchor, 3/16 in Dia, 1-3/4 in L, Carbon Steel, Zinc Stalgard
The UltraCon+ fastening system is a complete family of screw anchors for light to medium-duty applications in concrete, masonry block, brick and wood base materials. The UltraCon+ is fast and easy to install and provides a neat, finished appearance. The UltraCon+ screw anchor is...- $14.14
- $14.14
- Unit price
- per
-
Vendor: DEWALT
DEWALT UltraCon+ Series DFM12720 Concrete Screw Anchor, 1/4 in Dia, 1-1/4 in L, Carbon Steel, Zinc Stalgard, 100/BX
The UltraCon+ fastening system is a complete family of screw anchors for light to medium-duty applications in concrete, masonry block, brick and wood base materials. The UltraCon+ is fast and easy to install and provides a neat, finished appearance. The UltraCon+ screw anchor is...- $16.04
- $16.04
- Unit price
- per
-
Vendor: DEWALT
DEWALT UltraCon+ Series DFM12708 Concrete Screw Anchor, 3/16 in Dia, 3-1/4 in L, Carbon Steel, Zinc Stalgard, 100/BX
The UltraCon+ fastening system is a complete family of screw anchors for light to medium-duty applications in concrete, masonry block, brick and wood base materials. The UltraCon+ is fast and easy to install and provides a neat, finished appearance. The UltraCon+ screw anchor is...- $20.89
- $20.89
- Unit price
- per
-
Vendor: DEWALT
DEWALT UltraCon+ Series DFM12724 Concrete Screw Anchor, 1/4 in Dia, 2-1/4 in L, Carbon Steel, Zinc Stalgard
The UltraCon+ fastening system is a complete family of screw anchors for light to medium-duty applications in concrete, masonry block, brick and wood base materials. The UltraCon+ is fast and easy to install and provides a neat, finished appearance. The UltraCon+ screw anchor is...- $21.89
- $21.89
- Unit price
- per
-
Vendor: DEWALT
DEWALT UltraCon+ Series DFM12700 Concrete Screw Anchor, 3/16 in Dia, 1-1/4 in L, Carbon Steel, Zinc Stalgard, 100/BX
The UltraCon+ fastening system is a complete family of screw anchors for light to medium-duty applications in concrete, masonry block, brick and wood base materials. The UltraCon+ is fast and easy to install and provides a neat, finished appearance. The UltraCon+ screw anchor is...- $13.54
- $13.54
- Unit price
- per
-
Vendor: DEWALT
DEWALT UltraCon+ Series DFM12704 Concrete Screw Anchor, 3/16 in Dia, 2-1/4 in L, Carbon Steel, Zinc Stalgard, 100/BX
The UltraCon+ fastening system is a complete family of screw anchors for light to medium-duty applications in concrete, masonry block, brick and wood base materials. The UltraCon+ is fast and easy to install and provides a neat, finished appearance. The UltraCon+ screw anchor is...- $16.32
- $16.32
- Unit price
- per
-
Vendor: COBRA ANCHORS
Cobra Anchors 620W Screw, 3/16 in Thread, 1-1/4 in L, Flat Head, Phillips, Robertson Drive, Steel, 10/PK
The COBRATAP concrete screws are designed with a high and low thread to cut the concrete more effectively and to keep its alignment. It is made of tempered, high-grade steel to ensure the best torque and maximum holding power and is-coated with the corrosion-resistant...- $13.16
- $13.16
- Unit price
- per
-
Vendor: GRABBER CONSTRUCTION
Grabber Construction Deckmaster DMG6CB Deck Clip
Deckmaster G6 deck clips have been reengineered to meet and exceed the highest standards for hidden fastening deck clip systems. The new patent pending design features a much stronger 4 wing uni-body construction, 30% more steel and 2000 hrs GrabberGard® corrosion protection. Unibody design,...- $134.94
- $134.94
- Unit price
- per
-
Vendor: TEKS
Teks 21340 Screw, #12 Thread, 1 in L, Coarse Thread, Hex Drive, Self-Drilling, Self-Tapping Point, Steel, Zinc, 100 PK
Teks® fasteners are offered in sharp and drill points that easily penetrate light to heavy-gauge metal and wood. Professionals no longer have to struggle when engaging their work surface. The self-tapping threads are designed to tap holes while providing great holding power ensuring strong...- $13.72
- $13.72
- Unit price
- per
-
Vendor: PRO-FIT
ProFIT 0285192/0297192 Deck Screw, #10 Thread, 3-1/2 in L, Coarse Thread, Bugle Head, Combo Drive, Sharp Point, Ceramic
Use for exterior deck and railing projects where rust-resistance is important. Countersinking bugle head for smooth finish Coarse thread for excellent holding power when attaching to wood Ceramic-coated to protect against high-temperatures, highly resistant to corrosive compounds and more resistant to friction- $68.68
- $68.68
- Unit price
- per
-
Vendor: TAPCON
Tapcon 24325 Screw Anchor, 2-1/4 in L, Hex Drive, Steel, Climaseal, 75/PK
Fast installation. Replaces small diameter expansion anchors, plugs and screws in light to medium-duty applications. No need to pre-spot hole. No inserts are required. Reversible and removable. Can be installed close to an edge. Thread design results in increased pullout values and lower installation...- $33.76
- $33.76
- Unit price
- per
-
Vendor: CAMO
Camo 0345065 ClipDrive Tool, Drill Operation, Metal, Orange, 2-1/4 in L
Camo has a stand-up fastening tool for every installation. You can fasten square decking like pressure treated, cedar and redwood with the DRIVE and collated screws, or fasten grooved decking and Camo universal deck clips with the ClipDRIVE. Fasten grooved decking while comfortably standing...- $132.38
- $132.38
- Unit price
- per
-
-
Vendor: PRO-FIT
Camo 0345239S Deck Screw, 2-3/8 in L, Star Drive, Stainless Steel
Hidden in the side of the board, Camo deck screws create a beautiful, fastener-free deck surface. Easy to install using either Marksman tool, Camo secures deck boards directly to the joist to reduce board movement and they back out easily in the event a...- $486.68
- $486.68
- Unit price
- per
-
Vendor: CAMO
Camo 345070 Lever Tool, Lever Operation
Build a better deck by yourself with LEVER®, the one-turn tool that locks-in rows of boards and clips and straightens warped boards. Speed up grooved deck installs, lock-in rows of boards and clips Strong enough to straighten any warped board Adjusts to single, double...- $131.84
- $131.84
- Unit price
- per
-
Vendor: SENCO
Senco 06A Series 06A125P Screw, Gray, #6 Thread, 1-1/4 in L, Bugle Head, #2 Drive, Steel, Phosphate, 1000/PK
50 screws per flat strip. Gray phosphate finish. For drywall to wood. Compatible with DS235AC (264.0712), DS232AC (264.0670), DS215-18V (264.0654), DS212-18V (264.0662). Phillips recess provides smooth engagement with moderate torque transmission Bugle head provides consistent penetration without damaging the paper Coarse threads are ideal...- $32.23
- $32.23
- Unit price
- per
-
Vendor: COBRA ANCHORS
Cobra Anchors 086Y Spring Toggle Bolt, 3 in L, Steel, 95 lb, 4/PK
The Spring Toggle Bolt is a toggle anchor made of steel and is ideal for fixing heavy items to the wall or ceiling. It is offered in a variety of lengths to accommodate thicker material. The two metal wings are spring loaded and open...- $5.32
- $5.32
- Unit price
- per
-
Vendor: ACORN INTERNATIONAL
Acorn International SW-MW15LS250 Screw, #9 Thread, Light Stone, Hex Drive, Self-Tapping, Type 17 Point, 250/BAG
#9-15 Metal-to-wood screws are sealing self-piercing tapping screws made from heat treated Steel, case hardened for roofing and siding applications. A 1/4 in across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for...- $30.26
- $30.26
- Unit price
- per
-
Vendor: ACORN INTERNATIONAL
Acorn International SW-SS1234G250 Stitch Screw, #12 Thread, High-Low Thread, Hex Drive, Piercing, Self-Tapping Point
Acorn International Stitch Screw, #12 Thread, High-Low Thread, Hex Drive, Piercing, Self-Tapping Point, Galvanized Steel, Package Quantity: 250 BAG, 3/4 in Length Under Head, Includes: EPDM Washer 1000 hrs salt spray coating- $23.53
- $23.53
- Unit price
- per
-
Vendor: COBRA ANCHORS
Cobra Anchors 631J Screw, 1/4 in Thread, 1-3/4 in L, Flat Head, Phillips, Robertson Drive, Steel, 25/PK
The COBRATAP concrete screws are designed with a high and low thread to cut the concrete more effectively and to keep its alignment. It is made of tempered, high-grade steel to ensure the best torque and maximum holding power and is-coated with the corrosion-resistant...- $28.92
- $28.92
- Unit price
- per
-
Vendor: MIDWEST FASTENER
Midwest Fastener 05525 Carriage Bolt, 1/2-13 in Thread, NC Thread, 5 in OAL, 2 Grade
Midwest Fastener Carriage Bolt, 2 Grade, Thread Type: NC, Thread Size: 1/2-13 in, Head Type: Round, 5 in OAL- $49.99
- $49.99
- Unit price
- per
Sidebar
Recently Viewed Products
1
/
of
20
- Choosing a selection results in a full page refresh.