TIMBER SCREW HEX TAN 1/4 X 8IN

TIMBER SCREW HEX TAN 1/4X10IN

TIMBER SCREW HEX TAN 5/16X12IN

TIMBER SCREW HEX TAN 5/16X14IN

LAG SCREW STAR TAN 5/16 X 4IN

LAG SCREW STAR TAN 5/16 X 5IN

DECK SCREW EXT TAN NO9X2-1/2IN

DECK SCREW EXTR TAN NO9 X 3IN

DECK SCREW EXTR TAN NO10 X 4IN

LDGR BRD SCRW HX TAN 3/8X3-5/8

LDGR BRD SCREW HEX TAN 3/8X5IN

LDGR BRD SCREW HEX TAN 3/8X6IN

SCREW DECK PHLPS BGL NO8 X 3IN

STRUCT SCREW BLK 5/16X2-7/8IN

STRUCT SCREW BLK 5/16X4-1/2IN

STRUCT SCREW BLACK 5/16 X 5IN

STRUCT SCREW BLACK 5/16 X 6IN

STRUCT SCREW BLACK 5/16 X 8IN

TRIM SCREW TAN NO8 X 1-1/4IN

LAG SCREW STAR TAN 5/16 X 4IN

LAG SCREW STAR TAN 5/16 X 5IN

LAG SCREW STAR TAN 5/16 X 6IN

ANCHOR SD ZINC NO8X1-5/8

ANCHOR SD ZINC NO8X1-5/8

ANCHOR SD METAL NO8X1-5/8

ANCHOR SD ZINC NO8X1-5/8

precision-cast aluminum alloy ratchet wheel, one piece construction galvanized, aircraft quality cable. Interlocking, precision fit, steel alloy pawls with safety spacer sleeve. Cold rolled, high strength, tempered steel frame and handle drop-forged steel slip hooks with OSHA Recommended safety latches. Heavy gauge steel, reinforced...

precision-cast aluminum alloy ratchet wheel, one piece construction galvanized, aircraft quality cable. Interlocking, precision fit, steel alloy pawls with safety spacer sleeve. Cold rolled, high strength, tempered steel frame and handle drop-forged steel slip hooks with OSHA Recommended safety latches. Heavy gauge steel, reinforced...

Maasdam Rope Puller, Lifting Capacity: 0.75 ton, Pull Force: 1500 lb, Hook Opening Size: 1 in, Minimum Between Hooks: 8 in, Ratchet Type: Interlocking, Rope/Cable Diameter: 1/2 in, Steel, Zinc, Includes: Safety Latch Hooks Manufactured to the same exacting standards as our cable pullers...

Maasdam Strap Puller, Lifting Capacity: 1 ton, Lift Range: 10 ft, Rope/Cable Diameter: 1 in, Rope/Cable Length: 25 ft, Steel Flexible strapping material conforms to and controls the load non-conductive properties Precision-cast aluminum alloy ratchet wheel one-piece construction Interlocking, precision fit, steel alloy pawls...

Malco Screw, Thread Size: 1/2-7, Thread Type: Single, Drive Type: Hex, Slotted, Sheet Metal, Drive Size: 1/4 in, White

Our asphalt shingle nails have a large head and are available in a variety of finishes. Designed to meet ASTM spec F1667 and A-153. Nails should be long enough to penetrate at least 3/4 in into the wood deck lumber. DRIVE-RITE® aluminum nails for...

Our quality paint finish is a special baking enamel for fine durability. Made from 0.101 in wire with 3/16 in flat heads. Made in the USA

Round wire type. Made of high carbon steel, heat-treated and tempered. Designed for fastening furring strip, cleats, flood plates, partition walls and more. directly to masonry. 9 ga, 5/16 in head. Made in the USA.

These slim diameter hardwood trim nails are made from a HCS wire to ensure good driving into oak, birch, walnut and other hardwoods. There are many more nails per pound than with ordinary finish nails so they cost less to use and there are...

High-quality painted trim nails for use with trim coil, soffit and fascia. Available painted in many different colors pre-matched to coil manufacturer's colors. These nails have a checkered head.

The checkered head on these Type 304 stainless nails helps to hold paint and the strong, slim bodies drive better than aluminum trim nails. These are the ultimate nails to ensure excellent long term rust protection! Ring shank provides additional holding power. Made in...

The checkered head on these Type 304 stainless nails helps to hold paint and the strong, slim bodies drive better than aluminum trim nails. These are the ultimate nails to ensure excellent long term rust protection. Ring shank provides additional holding power. Made in...

High-quality painted trim nails for use with trim coil, soffit and fascia. Available painted in many different colors pre-matched to coil manufacturers colors. These nails have a checkered head, specially designed to hold more paint than a flat head.

High-quality painted trim nails for use with trim coil, soffit and fascia. Available painted in many different colors pre-matched to coil manufacturers colors. These nails have a checkered head, specially designed to hold more paint than a flat head.

The checkered head on these type 304 stainless nails helps to hold paint and the strong, slim bodies drive better than aluminum trim nails. These are the ultimate nails to ensure excellent long term rust protection. Ring shank provides additional holding power. Made in...

Maze Trim Nail, 1-1/4 in, Stainless Steel, Almond

These specially engineered nails are recommended for face and blind nailing many types of fiber cement siding such as Allura™ or HardiPlank®. The STORMGUARD® double hot-dipped galvanized coating on these nails ensures excellent long term rust protection. These nails meet the blind and face...

These specially engineered nails are recommended for face and blind nailing many types of fiber cement siding such as Allura™ or HardiPlank®. The STORMGUARD® double hot-dipped galvanized coating on these nails ensures excellent long-term rust protection. These nails meet the blind and face nail...

Maze STORMGUARD® plain and ring shank cedar shake and shingle nails are double hot-dipped galvanized, which conform to ASTM standard A153, class D and conform to the nail specifications of the cedar shake and shingle bureau for non-saltwater areas. These slender, stiff nails resist...

Maze STORMGUARD® plain and ring shank cedar shake and shingle nails are double hot-dipped galvanized, which conform to ASTM standard A153, class D and conform to the nail specifications of the cedar shake and shingle bureau for non-saltwater areas. These slender, stiff nails resist...

Maze STORMGUARD® plain and ring shank cedar shake and shingle nails are double hot-dipped galvanized, which conform to ASTM standard A153, class D and conform to the nail specifications of the cedar shake and shingle bureau for non-saltwater areas. These slender, stiff nails resist...

Widely used for fastening corrugated metal roofing and siding. Also popular for aluminum and fiberglass products. These STORMGUARD® Nails are double-dipped in molten zinc after threading so no raw steel is exposed. EPDM rubber washers seal nail holes. Ring shanks hold tight.

These painted, hot-dipped galvanized nails are great for applying jamb seals on garage doors. Available in a variety of colors to match manufacturers colors. Pricing includes paint charges.

Dependable STORMGUARD® double hot-dipped galvanized nails with our lifetime warranty provide long-term corrosion resistance for these long-lasting sidings. Checkered heads enhance paint adhesion. 1-1/2 in penetration into framing is recommended.