Campbell Single Jack Chain, 520 lb Working Load, #14 Trade, Inside Link Width: 0.34 in, Inside Link Length: 1.29 in, Carbon Steel, Black Polycoat, 0.18 in Material Diameter, 190 ft Length, 9.3 -Link/Foot Standard material, low carbon steel Standard finish, Black Polycoat Proof-tested Design...

For playground and gymnasium equipment (1/0 and larger), farm and animal chains and many general-purpose applications. Do not use for overhead lifting. The Playground Equipment Association, which has adopted the min of 1/0 Inco coil chain. Design factor 4 to 1

For playground and gymnasium equipment (1/0 and larger), farm and animal chains and many general-purpose applications. The Playground Equipment Association has adopted the min of 1/0 Inco coil chain. WARNING: DO NOT EXCEED the working load limits for chain or components. DO NOT USE...

For playground and gymnasium equipment (1/0 and larger), farm and animal chains and many general-purpose applications. Do not use for overhead lifting. The Playground Equipment Association, which has adopted the min of 1/0 Inco coil chain. Design factor 4 to 1

Campbell Sash Chain, Working Load Limit: 75 lb, Trade Size: #8, Inside Link Length: 0.55 in, Carbon Steel, Copper Glo, Material Diameter: 0.04, 100 ft L, Links per Foot: 22

Connections for chain and attachments. When using cold shuts with chain, use one size larger than chain size. With a hammer, drive the open end through the cold shut eye then peen the extended end to prevent opening. Note: Cold shuts should not be...

Connections for chain and attachments. When using cold shuts with chain, use one size larger than chain size. With a hammer, drive the open end through the cold shut eye then peen the extended end to prevent opening. Note: Cold shuts should not be...

For use with proof coil or high-test chain. Warning, do not exceed the working load limits for chain or components. Do not use for overhead lifting or hoisting. Do not use if the chain or components are visibly distorted or worn. No. T5423300 For...

Forged steel, finish is zinc-plated. For use with Proof Coil or High-Test chain.

For connections of chain and attachments (Not for overhead lifting). Do Not exceed working load limit. Connections for chain and attachments Chain is inserted, then link is hammered closed

For connections of chain and attachments (Not for overhead lifting). Do Not exceed working load limit. Connections for chain and attachments Chain is inserted, then link is hammered closed

For connections of chain and attachments (Not for overhead lifting). Do Not exceed working load limit. Connections for chain and attachments Chain is inserted, then link is hammered closed

Campbell Pulley, Single Sheave, Working Load Limit: 420 lb, Rope Size: 3/8 in, Sheave Size: 1-1/2 in, Sheave Material: Zinc, Block Material: Steel, Zinc, Wall Mounting Steel body and die-cast zinc sheave Zinc-plated to protect against rust and corrosion Powder metal bushing to extend...

Campbell Pulley, Single Sheave, Working Load Limit: 480 lb, Rope Size: 3/8 in, Sheave Size: 2 in, Sheave Material: Zinc, Block Material: Steel, Zinc, Wall Mounting Steel body and die-cast zinc sheave Zinc-plated to protect against rust and corrosion Powder metal bushing to extend...

Campbell Pulley, Single Sheave, Working Load Limit: 550 lb, Rope Size: 3/8 in, Sheave Size: 2-1/2 in, Sheave Material: Zinc, Block Material: Steel, Zinc, Wall Mounting Steel body and die-cast zinc sheave Zinc-plated to protect against rust and corrosion Powder metal bushing to extend...

Campbell Pulley, Single Sheave, Working Load Limit: 650 lb, Rope Size: 1/2 in, Sheave Size: 3 in, Sheave Material: Zinc, Block Material: Steel, Zinc, Wall Mounting Steel body and die-cast zinc sheave Zinc-plated to protect against rust and corrosion Powder metal bushing to extend...

Campbell Pulley, Single Sheave, Working Load Limit: 420 lb, Rope Size: 3/8 in, Sheave Size: 1-1/2 in, Sheave Material: Zinc, Block Material: Steel, Zinc, Wall Mounting Steel body and die-cast zinc sheave Zinc-plated to protect against rust and corrosion Powder metal bushing to extend...

Campbell Pulley, Fixed Eye, Single Sheave, Working Load Limit: 480 lb, Rope Size: 3/8 in, Sheave Size: 2 in, Sheave Material: Zinc, Block Material: Steel, Zinc, Ceiling, Wall Mounting, Includes: (5) Single Sheave Fixed Eye Pulley Zinc-plated to protect against rust and corrosion Powder...

Campbell Pulley, Single Sheave, Working Load Limit: 550 lb, Rope Size: 3/8 in, Sheave Size: 2-1/2 in, Sheave Material: Zinc, Block Material: Steel, Zinc, Wall Mounting Steel body and die-cast zinc sheave Zinc-plated to protect against rust and corrosion Powder metal bushing to extend...

Campbell Pulley, Single Sheave, Working Load Limit: 650 lb, Rope Size: 1/2 in, Sheave Size: 3 in, Sheave Material: Zinc, Block Material: Steel, Zinc, Wall Mounting Steel body and die-cast zinc sheave Zinc-plated to protect against rust and corrosion Powder metal bushing to extend...

Campbell Pulley, Double Sheave, Working Load Limit: 400 lb, Rope Size: 3/8 in, Sheave Size: 1-1/2 in, Sheave Material: Zinc, Block Material: Steel, Zinc, Wall Mounting Steel body and die-cast zinc sheave Zinc-plated to protect against rust and corrosion Powder metal bushing to extend...

Campbell Pulley, Single Sheave, Working Load Limit: 100 lb, Rope Size: 3/8 in, Sheave Size: 1-1/2 in, Sheave Material: Zinc, Block Material: Steel, Zinc, Wall Mounting Steel body and die-cast zinc sheave Zinc-plated to protect against rust and corrosion Powder metal bushing to extend...

Campbell Pulley, Single Sheave, Working Load Limit: 100 lb, Rope Size: 3/8 in, Sheave Size: 2 in, Sheave Material: Zinc, Block Material: Steel, Zinc, Wall Mounting Steel body and die-cast zinc sheave Zinc-plated to protect against rust and corrosion Powder metal bushing to extend...

Campbell Pulley, Single Sheave, Working Load Limit: 100 lb, Rope Size: 3/8 in, Sheave Size: 2 in, Sheave Material: Zinc, Block Material: Steel, Zinc, Wall Mounting Steel body and die-cast zinc sheave Zinc-plated to protect against rust and corrosion Powder metal bushing to extend...

Campbell Rigid Eye Bolt Snap, Working Load Limit: 70 lb, Trade Size: 5/8 in, Snap Opening Size: 11/32 in, Malleable Iron, Zinc, Dimensions: 5/8 in Dia x 5 in L

Campbell Rigid Eye Spring Snap, Working Load Limit: 90 lb, Trade Size: 1 in, Snap Opening Size: 7/16 in, Malleable Iron/Steel, Zinc, Dimensions: 1 in Dia x 3-1/4 in L

Campbell Swiveling Bolt Snap, Working Load Limit: 110 lb, Trade Size: 1/2 in, Snap Opening Size: 3/8 in, Malleable Iron/Steel, Zinc, Dimensions: 1/2 in Dia x 4 in L

Campbell Swiveling Spring Snap, Working Load Limit: 20 lb, Trade Size: 3/8 in, Snap Opening Size: 5/32 in, Malleable Iron, Nickel, Silver, Dimensions: 3/8 in Dia x 2 in L

Campbell Rigid Eye Spring Snap, Working Load Limit: 30 lb, Trade Size: 3/8 in, Snap Opening Size: 5/32 in, Malleable Iron/Steel, Zinc, Dimensions: 3/8 in Dia x 2 in L

Campbell Breeching Snap, Working Load Limit: 80 lb, Trade Size: 2-1/2 in, Snap Opening Size: 9/32 in, Malleable Iron/Steel, Zinc, Dimensions: 2-1/2 in L

Campbell Swiveling Cap Snap, Working Load Limit: 190 lb, Trade Size: 1 in, Snap Opening Size: 7/16 in, Malleable Iron, Zinc, Dimensions: 1 in Dia x 4-1/2 in L

Campbell Double-Ended Bolt Snap, Working Load Limit: 70 lb, Trade Size: 3-1/2 in, Snap Opening Size: 9/32 in, Malleable Iron, Zinc, Dimensions: 3-1/2 in L

Campbell Double-Ended Bolt Snap, Working Load Limit: 70 lb, Trade Size: 4-1/8 in, Snap Opening Size: 13/32 in, Iron, Zinc, Dimensions: 4-1/8 in L

Campbell Double-Ended Bolt Snap, Working Load Limit: 110 lb, Trade Size: 4-3/4 in, Snap Opening Size: 3/8 in, Malleable Iron, Zinc, Dimensions: 4-3/4 in L

Campbell Swiveling Bolt Snap, Working Load Limit: 110 lb, Trade Size: 5/8 in, Snap Opening Size: 3/8 in, Malleable Iron/Steel, Zinc, Dimensions: 5/8 in Dia x 4 in L

Campbell Swiveling Bolt Snap, Working Load Limit: 100 lb, Trade Size: 1 in, Snap Opening Size: 15/32 in, Malleable Iron/Steel, Zinc, Dimensions: 1 in Dia x 4-5/8 in L

Campbell Rigid Eye Bolt Snap, Working Load Limit: 60 lb, Trade Size: 3/8 in, Snap Opening Size: 13/32 in, Malleable Iron/Steel, Zinc, Dimensions: 3/8 in Dia x 3-1/2 in L

Campbell Rigid Eye Bolt Snap, Working Load Limit: 60 lb, Trade Size: 1/2 in, Snap Opening Size: 7/16 in, Malleable Iron/Steel, Zinc, Dimensions: 1/2 in Dia x 4 in L

Campbell Swiveling Spring Snap, Working Load Limit: 80 lb, Trade Size: 3/4 in, Snap Opening Size: 9/32 in, Malleable Iron/Steel, Zinc, Dimensions: 3/4 in Dia x 4-1/8 in L

Campbell Swiveling Spring Snap, Working Load Limit: 30 lb, Trade Size: 3/8 in, Snap Opening Size: 7/32 in, Malleable Iron/Steel, Nickel, Dimensions: 3/8 in Dia x 2-1/2 in L

Campbell Swiveling Cap Snap, Working Load Limit: 100 lb, Trade Size: 3/4 in, Snap Opening Size: 11/32 in, Malleable Iron/Steel, Zinc, Dimensions: 3/4 in Dia x 3-1/2 in L

Campbell Swiveling Spring Snap, Working Load Limit: 60 lb, Trade Size: 3-3/4 in, Snap Opening Size: 5/16 in, Malleable Iron/Steel, Zinc, Dimensions: 3-3/4 in L

Campbell Swiveling Animal Tie Snap, Working Load Limit: 300 lb, Trade Size: 7/8 in, Snap Opening Size: 7/8 in, Malleable Iron/Steel, Zinc, Dimensions: 7/8 in Dia x 4-7/8 in L

Campbell Swiveling Bolt Snap, Working Load Limit: 60 lb, Trade Size: 3/8 in, Snap Opening Size: 5/16 in, Malleable Iron, Nickel, Dimensions: 3/8 in Dia x 2-7/8 in L

Campbell Swiveling Spring Snap, Working Load Limit: 30 lb, Trade Size: 3/8 in, Snap Opening Size: 7/32 in, Malleable Iron/Steel, Nickel, Dimensions: 3/8 in Dia x 2-1/2 in L

Campbell Bolt Snap, Working Load Limit: 80 lb, Trade Size: 1 in, Snap Opening Size: 3/8 in, Zinc, Nickel-Plated, Dimensions: 3-3/16 in L

Campbell Quick Snap, Working Load Limit: 70 lb, Trade Size: 1 in, Snap Opening Size: 5/8 in, Zinc, Nickel-Plated, Dimensions: 3-13/16 in L

Campbell Swiveling Bolt Snap, Working Load Limit: 90 lb, Trade Size: 1/2 in, Snap Opening Size: 3/8 in, Zinc, Nickel, Dimensions: 1/2 in Dia x 3-1/2 in L

Campbell Rigid Eye Bolt Snap, Working Load Limit: 40 lb, Trade Size: 1 in, Snap Opening Size: 3/8 in, Zinc, Nickel, Dimensions: 1 in Dia x 3-1/16 in L

Campbell Round Eye Bolt Snap, Working Load Limit: 90 lb, Trade Size: 5/8 in, Snap Opening Size: 3/8 in, Zinc, Nickel-Plated, Dimensions: 3-3/8 in L