Halex EMT Connector, 2 in Trade, Compression Connection, Zinc

Halex Clamp Connector, Trade Size: 2 in, Zinc, 2-61/64 in L, 2 in W, 1 in H, Suitable for: 1.085 to 1.52 in Dia Non-Metallic Cable, Flex Cords, Multi-Flex Cords

Halex EMT Coupling, 1-1/2 in Trade, Compression Connection, Zinc

Use to join two lengths of EMT conduit together. Zinc. UL, CSA approved.

Halex Clamp Connector, Trade Size: 1-1/2 in, Zinc, 2-61/64 in L, 2 in W, 1 in H, Suitable for: 0.835 to 1.52 in Dia Non-Metallic Cable, Flex Cords, Multi-Flex Cords or (2) Conductor 4/0 SE Cables

Indoors. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. Concrete tight

Indoors. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. Concrete tight

Zinc die-cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL approved.

Zinc die-cast. Rounded surface prevents damage to insulation. Thermoplastic liner rated at 150 deg F. Indoor or outdoor use. Use with locknut to terminate service conduit to a cabinet. Lug provided for bonding jumper to a neutral bus bar. UL listed and CSA certified....

Suitable for all low voltage applications. For use in lighting, irrigation and underground wiring. No junction box required. Filled with petroleum-based sealant. 30 V/10 A maximum. 13/16 in x 19/16 in. 30 V/10 A Max No junction box required Filled with petroleum-based sealant

Suitable for all wire splices, especially those exposed to condensation, water vapors or dust. UL 486D listed. One-Step® installation Corrosion-resistant

For load centers No PL0724R and Challenger No S3100RN, commonly used on WNB breakers.

Commercial specification-grade straight blade receptacle on 4 in galvanized steel cover. Back and side wire. 15 A, 125 V. 5-15R NEMA. Temperature rating of -20 to 60 deg C. UL listed, meets all CSA requirements, NOM Certified.

Heavy-duty zip ties are hard-wearing and designed for rugged industrial, automotive and farm/ag applications demanding high levels of tensile strength and large bundle diameters. Permanently secured until you cut them off GB ties lock tight without stretching or sliding. The thick nylon 6/6 material...

Thin wall heat-shrink tubing is constructed from durable, flame-retardant black polyolefin which is resistant to both solvents and fluids making it ideal for cable insulation, repair, marking or bundling. Heat shrink not only provides superior mechanical, abrasion and moisture protection but also strengthens connections...

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant. UL listed E35297.

Zinc die cast. Indoor or outdoor applications. Use to terminate threaded conduit to a knockout box or enclosure, where space within the box is limited. Used with a locknut to provide a short raceway between boxes or enclosures. UL and CSA approved.

Safe, non-conductive, takes standard covers and accessories. For through terminations. With detachable mounting feet. 19 cu-in capacity. Detachable mounting feet provide easy mounting

End plate. Thermoplastic construction for durability and flexibility. Easy to snap together and lock. Mid-size design to fit over most existing wall openings. Screw-catch feature holds already attached mounting screws captive for easy installation. Screws are slotted steel, baked enamel and painted. Meets current...

Replaces main breaker on 200 A type BR load centers. Includes main breaker, mounting screws, two bus torque nuts and instructions. For field installed mains. #2 to 300 kcmil wire range. 120/240 VAC, 10,000 AIR.

Molded from non-flammable Polycarbonate, pre-marked "EMERGENCY" with indelible printing, not to fade, bleed or rub off. High letters for easy identification. Virtually unbreakable, with high-structural rigidity, long-term form retention and excellent impact and abrasion resistance. Screw-catch feature holds mounting screws captive and simplifies installation....

Outdoor use, rugged metallic construction. Powder coat finish. Scratch resistant. Includes installation hardware, gasket and multi-lingual instructions. cULuS/UL listed. NEMA 3R rated. Rugged metallic construction State-of-the-art powder coat finish provides maximum weatherability and scratch resistance

For snap-in splicing of low-voltage AWG wire without prior stripping. 75 degree Celsius temperature rating. Clamshell.

Eight each miniature gray, 5 each small orange, 4 each medium yellow and large red. Five each 22-16 AWG, 16-14 AWG, 12-10 AWG ring terminals, 22-16 AWG, 16-14 AWG, 12-10 AWG spade terminals, 16-14 AWG female, male disconnects, 18-14 AWG tap splices, 22-16 AWG,...

Twenty-five each miniature gray, 15 each small orange, medium yellow and large red wire connectors; 12 each 18-14 AWG tap splices, 20 each 22-16 AWG, 16-14 AWG, ring terminals; 22-16 AWG, 16-14 AWG spade terminals, 16-14 AWG female and male disconnects, 15 each 22-14...

These polyethylene staples with zinc-plated nails are designed to offer fast and easy installation when securing most types of non-metallic cables. The zinc-plated nails not only resist rust and corrosion but drive together for fast installation with a hammer while the recessed heads ensure...

Gardner Bender provides a complete line of staple and fastening solutions for all industries, including industrial, residential, construction or manufacturing. From low voltage wire to service entrance cables, professionals rely on Gardner Bender for quality fastening products. Our staples are designed to offer fast...

These polyethylene staples with zinc-plated nails are designed to offer fast and easy installation when securing most types of non-metallic cables. The zinc-plated nails not only resist rust and corrosion but drive together for fast installation with a hammer while the recessed heads ensure...

These polyethylene staples with zinc-plated nails are designed to offer fast and easy installation when securing most types of non-metallic cables. The zinc-plated nails not only resist rust and corrosion but drive together for fast installation with a hammer while the recessed heads ensure...

Four each 12-10 AWG #10, 3/8 in, 9 each 16-14 AWG #12, 11 each 22-18 AWG #10, 16-14 AWG #6, #8, 16-14 AWG #10 stud ring terminals, 11 each 22-18 AWG #8, #10, 16-14 AWG #6, #8, #10 stud spade terminals, 4 each 12-10...

Gardner Bender provides a complete line of staple and fastening solutions for all industries, including industrial, residential, construction or manufacturing. From low voltage wire to service entrance cables, professionals rely on Gardner Bender for quality fastening products. Our staples are designed to offer fast...

The Gardner Bender 9/16 in graphite metal staples 18-pack feature durable metal construction with a graphite metallic finish. These staples are ideal for securing non-metallic cable and can be drive in with a hammer. The recessed heads help protect your cable and the sharp...

Insulated metal staples secure a large variety of cable types including NM, BX, MC, AC and UF cables. These staples offer a durable polyethylene insulating sheath to prevent arc faults if the staple is over-driven through a cable jacket. Strong steel constructed staples offer...

The Gardner Bender 1/2 in graphite metal staples 24-pack are ideal for securing non-metallic cable. These staples feature durable metal construction with a graphite metallic finish. The recessed heads help protect your cable and the sharp tips offer an easy start. These staples can...

Insulated metal staples secure a large variety of cable types including NM, BX, MC, AC and UF cables. These staples offer a durable polyethylene insulating sheath to prevent arc faults if the staple is over-driven through a cable jacket. Strong steel constructed staples offer...

The Gardner Bender 3/4 in heat shrink tubing provides abrasion and moisture protection for electrical wire and cable. This tubing is constructed of flame-retardant polyolefin. Tests for 7 common wiring errors plus GFI circuits Built-in GFCI test button, test both standard and GFCI receptacles...

Ultrasonic welding and integrated construction of the strap and body. Backwire clamps on the side terminals for installation of #12 and #14 wire. Thermoplastic rocker, top and back body are virtually unbreakable. Screws accept slotted, Phillips and Robertson head tools for installation in both...

The Gardner Bender 1/2 in heat shrink tubing provides abrasion and moisture protection for electrical wire and cable. This tubing is constructed of flame-retardant polyolefin. 18 to 10 AWG wire size Ergonomic wings 600 V rated Excellent product to repair appliance, extension or small...

Use the Gardner Bender 3/32 in. Black polyolefin heat shrink tubing for cable insulation, marking and bundling. The flame-retardant polyolefin construction resists common fluids and solvents. High-quality steel construction For 4/3 and 2/3 SE cables Pointed offset legs drive straight Won't split wood Excellent...

These plastic Kwik Clips are specially designed clips that are great for mounting bundles, cables, cords, tools and more to drywall, wood and painted surfaces. They feature a ratcheting and releasable function that allows adjustment to a range of bundle diameters and also contain...

These plastic Kwik Clips are specially designed clips that are great for mounting bundles, cables, cords, tools. To drywall, wood and painted surfaces. They feature a ratcheting and releasable function that allows adjustment to a range of bundle diameters and also contain a self-adhesive...

Thin wall heat shrink tubing is constructed from durable, flame-retardant black polyolefin which is -resistant to both solvents and fluids making it ideal for cable insulation, repair, marking or bundling. Heat shrink not only provides great mechanical, abrasion and moisture protection but also strengthens...

The Gardner Bender 1/2 in heat shrink tubing provides abrasion and moisture protection for electrical wire and cable. This tubing is constructed of flame-retardant polyolefin. Visual and audible indicators signal presence of voltage, by pressing pocket clip Built-in safe test feature assures batteries are...

The Gardner Bender 3/16 in heat shrink tubing provides abrasion and moisture protection for electrical wire and cable. This tubing is constructed of flame-retardant polyolefin. Strips and cuts solid and stranded wire Air cushion grips Embossed wire numbers for high visibility Includes looping hole...

Thin wall heat shrink tubing is constructed from durable, flame-retardant black polyolefin which is -resistant to both solvents and fluids making it ideal for cable insulation, repair, marking or bundling. Heat shrink not only provides great mechanical, abrasion and moisture protection but also strengthens...

Gardner® Bender Cable ties are designed for strength, durability and reliability. Ideal for all bundling and organizing tasks from the workshop to the office and from the laundry room to the kitchen; you name it and these ties will bundle it. Designed with simple...

Mid-size combination polycarbonate wallplates are virtually unbreakable, with high-structural rigidity, long-term form retention and excellent impact and abrasion resistance. Rugged construction reduces installation cost due to less plate breakage and resists bowing to provide a smooth, flat installation. Exclusive timesaving screw catch feature that...

Cable ties are ideal for all bundling and organizing tasks from the workshop to the office and from the laundry room to the kitchen, you name it and these ties will bundle it. Designed with simple enhancements that make them easy-to-use including a slightly...

Specifically designed for making positive ground connections with a hole in the tip of the connector to feed ground wire through. GreenGard connectors feature the same live action as GB™ WingGard™ connectors with knurled wings for a sure-grip and greater twisting leverage/torque. In addition...

Gardner® Bender's Patented double-lock cable ties are designed for strength, durability and reliability. Ideal for all bundling purposes; wires, cables, hoses or ducts, you name it and these ties will bundle it. Made from durable 100% nylon 6/6 material, these ties feature our patented...