Code-gauge steel enclosure. Single phase, 3-wire, solid neutral, 8 spaces and 16 circuits maximum 1-pole, 4 QP breakers maximum 2-pole, 120/240 V. 10,000 AIR. One piece plated aluminum bus bar. 100% circuit breaker twist outs. Positive load side circuit breaker hook rail. Suitable for...

Ground fault circuit interrupters are an effective means of preventing severe electrical shock. To protect equipment from damaging ground faults, Siemens GFCIs continuously monitor the difference in current between the hot and neutral conductors. If the electricity going to an outlet equals the current...

Code-gauge steel enclosure. Single phase, 3-wire, solid neutral, 4 spaces and 8 circuits maximum 1-pole, 2 QP breakers maximum 2-pole, 120/240 V. 10,000 AIR. One piece plated aluminum bus bar. 100% circuit breaker twist outs. Positive load side circuit breaker hook rail. Suitable for...

Ground fault circuit interrupters are an effective means of preventing severe electrical shock. To protect equipment from damaging ground faults, Siemens GFCIs continuously monitor the difference in current between the hot and neutral conductors. If the electricity going to an outlet equals the current...

Single phase, 2 pole, 2 wire, 240 V, rated 10 HP, steel enclosure. All lugs positioned for bottom entry and exit wiring. Easy mounting for quick installation. Pullout head can be replaced in off position. 10,000 AIR. 12 - 3 AWG al, 14 -...

Single phase, 3-wire, solid neutral, 2 spaces and 4 circuits maximum 1-pole, 1 QP breaker maximum 2-pole, 120/240 VAC. 10,000 AIR. One piece plated aluminum bus bar, heavier main bus for cooler operation, direct cable connection to bus bar. Main lugs and neutral on...

Code-gauge steel enclosure. Single phase, 3-wire, solid neutral, 8 space/16 circuits 1-pole, 4 QP breakers 2-pole, 120/240 VAC. 10,000 AIR. HS-hubs sold separately. One piece copper bus bar, 100% circuit breaker twist outs. Positive load side circuit breaker hook rail. Suitable for use as...

Used in load centers, CSED devices and NQOD and NF panel boards. Each terminal accepts one #14 - #4 copper wire or one #12 - #4 aluminum wire, two #14 - #12 copper wire or two #12 - #10 aluminum wire. ANSI certified and...

Die-cast zinc round 4 in cover and lamp holder combination. Powder-coated finish, scratch-resistant. For wet locations. Includes installation hardware, gasket and Multi-lingual instructions. Uses 75 to 150 W maximum, Par38 lamps, not included. UL listed 1598 C/UL. Rugged die-cast construction State of-the-art powder-coated finish...

For use in wet, damp or dry locations. Three 1/2 in threaded outlets. 2 in deep with lugs. May be used as a weatherproof junction box or as a housing for receptacles, switches and GFCIs. Powder-coated finish. Eight box mounting options with detachable lugs...

Horizontal device mount. Weatherproof covers for protection of outdoor receptacles. State-of-the-art powder-coated finish provides maximum weatherability and scratch resistance. Self-closing lids assure weatherproof protection when the receptacle is not in use. Includes installation hardware, gasket and Multi-lingual instructions. Size: 4-1/2 in x 2-3/4 in....

Used in load centers, CSED devices and NQOD and NF panel boards. Each terminal accepts one #14 - #4 copper wire or one #12 - #4 aluminum wire, two #14 - #12 copper wire or two #12 - #10 aluminum wire. ANSI certified and...

Used in load centers, CSED devices and NQOD and NF panel boards. Each terminal accepts one #14 - #4 copper wire or one #12 - #4 aluminum wire, two #14 - #12 copper wire or two #12 - #10 aluminum wire. ANSI certified and...

Used in load centers, CSED devices and NQOD and NF panel boards. Each terminal accepts one #14 - #4 copper wire or one #12 - #4 aluminum wire, two #14 - #12 copper wire or two #12 - #10 aluminum wire. ANSI certified and...

Used in load centers, CSED devices and NQOD and NF panel boards. Each terminal accepts one #14 - #4 copper wire or one #12 - #4 aluminum wire, two #14 - #12 copper wire or two #12 - #10 aluminum wire. ANSI certified and...

QO 100 amp, outdoor, NEMA type-3R circuit breaker enclosure, accepts QO circuit breakers with factory installed accessories. Solid neutral and ground bar kit PGTA2 included. 120/240 VAC, 22,000 maximum short circuit current rating that is not for use with single pole QO breakers. UL...

The industry leader in circuit protection is easily recognized by the industry's only trip indicator. The red Visi-Trip™ Indicator makes it easy to spot a tripped circuit breaker. Compact 3/4 in wide format for one-pole circuit breakers helps minimize panel space and footprint. The...

Main lug indoor load center, 100 A, 8 space/16 circuits. 1-1/2 in maximum knockouts in the top and bottom end walls to accommodate overhead or underground feed. Maximum load of 240 V and a 10,000 SCCR. NEMA type 1. Copper bus for conductivity. Single...

Outdoor main lug load center, 100 A, 6 space 12 circuit. NEMA type 3R enclosure with a rainproof cover. Copper bus bar, accommodates standard QO or QO tandem circuit breakers. ANSI certified and UL listed. Indoor and outdoor versions Separate flush or surface mount...

Main lug indoor load center, 100 A, 8 space/16 circuit. 1-1/2 in maximum knockouts in the top and bottom end walls to accommodate overhead or underground feed. The center is rated for a maximum load of 240 V and has a 10,000 SCCR. NEMA...

COVER RSD BOX ELEC 2G NONMETAL

COVER BOX CEIL PVC RND BLNK4IN

COVER RSD BOX ELEC 1G NONMETAL

BOX CEIL COMBO PVC RD NEW 20CU

COVER BOX SQ PVC 2G BLANK BLUE

Cartridge fuses are used to protect motors and branch circuits where higher amps or volt ratings are required. General-Purpose fuses have no time-delay and protect fuse panels, appliances and branch circuits. Protect lighting, heating and other circuits not subject to temporary surges and where...

BOX OUTLET PVC 3G NEW WRK 44CU

BOX OUTLET PVC 2G NEW WRK NAIL

SWITCHBOX PVC 1GNG NEW 2-7/8IN

SWITCHBOX PVC 1GNG NEW 3-1/4IN

BOX OUTLET PVC 1GNG OLDWK WALL

Carlon Conduit, Flexible, Trade Size: 3/4 in, PVC, 6 ft L

Contains everything necessary for complete installation including 6 ft conduit, two straight fittings and one 90 deg fitting. Totally non-metallic system provides assured grounding for safety. Non-conductive, non-corrosive. Easy to install. UL listed components. Non-conductive and non-corrosive, moisture tight

Mid size wallplates polycarbonate toggle polycarbonate wallplates are virtually unbreakable, with high structural rigidity, long term form retention and superior impact and abrasion resistance. Rugged construction reduces installation cost due to less plate breakage and resists bowing to provide a smooth, flat installation. Exclusive...

Cast aluminum weatherproof FS boxes - 1-gang FS boxes. Electrostatically painted with a baked, weather-resistant powder finish for exceptional durability. Accept single gang weatherproof cover and standard FS covers. UL listed for wet and damp locations with appropriate cover installed. Mounting lugs provide strength...

Eaton Load Center, 120/240 V, 200 A, Number of Phases: 1, Number of Spaces: 8, Number of Poles: 24, Number of Circuits: 16, Breaker/Load Center Type: Main Breaker, Plug-On Neutral, Bus Bar Material: Aluminum, Bus Bar Rating: 200 A, Enclosure Type: NEMA 3R, Flush,...

For securing speaker, telephone, bell and other low-volt wire. Polyethylene saddle won't rust, rot or deteriorate. Zinc-plated nail resists rust and corrosion. 1 nail per staple. Dives in with a hammer. UL listed. Secures Romex, UF and other types of non-metallic cable Nails for...

Mid-size combination polycarbonate wallplates are virtually unbreakable, with high-structural rigidity, long-term form retention and excellent impact and abrasion resistance. Rugged construction reduces installation cost due to less plate breakage and resists bowing to provide a smooth, flat installation. Exclusive timesaving screw catch feature that...

Mid size wallplates polycarbonate duplex receptacle rugged construction reduces installation cost due to less plate breakage and resists bowing to provide a smooth, flat installation. Exclusive time saving screw-catch feature that holds mounting screws captive and simplifies installation. High gloss finish is soil-resistant. Polycarbonate...

High impact-resistant nylon face and body. One-piece wraparound mounting strap for added strength and durability. Color coded body to identify amperage. Rugged glass-filled nylon body Clearly marked rating, NEMA configuration and approval listings on receptacle face One-piece brass contacts offer excellent performance and minimal...

Rugged nylon face and body. Clearly marked rating, NEMA configuration and approval listings on receptacle face. One-piece brass contacts for performance and minimum heat rise. Back wire terminal clamps for secure wiring. Combination head screws standard slot/Phillips. Rugged glass-filled nylon body Clearly marked rating,...

High impact-resistant nylon face and body. Combination head terminal and mounting screws. One-piece, wraparound mounting strap. Back wire terminal clamps for easy, secure wiring. One-piece brass contacts offer excellent design and minimum heat rise. UL Listed. Rugged glass-filled nylon body Clearly marked rating, NEMA...

Mid size wallplates polycarbonate toggle polycarbonate wallplates are virtually unbreakable, with high structural rigidity, long term form retention and superior impact and abrasion resistance. Rugged construction reduces installation cost due to less plate breakage and resists bowing to provide a smooth, flat installation. Exclusive...

Mid size wallplates polycarbonate toggle polycarbonate wallplates are virtually unbreakable, with high structural rigidity, long term form retention and superior impact and abrasion resistance. Rugged construction reduces installation cost due to less plate breakage and resists bowing to provide a smooth, flat installation. Exclusive...

For wet locations. Gasket, screws and plugs included. Use 75 to 150 W maximum, PAR38 lamps. Die-cast zinc, powder coat finish provides maximum weatherability and scratch resistance. Includes installation hardware, gasket and multi-lingual instructions. One 1/2 in NPT hole. Underwriters Recognized Component CSA C22.2...

For use in branch circuit wiring in wet, damp or dry locations. Designed for use as a weatherproof junction box and used with Bell outdoor round cluster covers and round lamp holder combinations. Die-cast aluminum construction. Powder-coated finish. Reinforced connector outlets. Cast-in mounting lugs,...

With lugs. Die-cast aluminum. For use in branch circuit wiring in wet, damp or dry locations. May be used as a weatherproof junction box or as housing for receptacles, switches and GFCI's. Eight box mounting options with detachable lugs provided. 2 in deep, three...

Includes installation hardware, gasket and multi-lingual instructions. 3-hole covers are supplied with two closure plugs. Die-cast zinc construction. Three 1/2 in NPT holes. UR - Underwrites recognized component CSA C22.2 No. 18 compliant. State-of-the-art powder coat finish provides maximum weatherability and scratch resistance Three...

With lugs. Die-cast aluminum. For use in branch circuit wiring in wet, damp or dry locations. May be used as a weatherproof junction box or as housing for receptacles, switches and GFCI's. Eight box mounting options with detachable lugs provided. Three threaded 3/4 in...

Constructed of die-cast aluminum. For use in branch circuit wiring in wet, damp or dry locations. May be used as a weatherproof junction box or as a housing for receptacles, switches and GFCIs. Reinforced connector outlets. Powder-coated finish. Eight box mounting options with detachable...