HACR, SWD rated. For ITE Pushmatic load centers. Requires a 1-1/2 in space. 120/240 V, 10,000 AIC.

HACR, SWD rated. For ITE Pushmatic load centers. Requires a 1-1/2 in space. 120/240 V, 10,000 AIC.

For ITE Pushmatic load centers. 1 space per breaker. SWD rated. 120 VAC, 10,000 AIC.

For ITE Pushmatic load centers. 1 space per breaker. SWD rated. 120 VAC, 10,000 AIC.

These Gardner® Bender double insulated for moisture protection in all environments. Switch must be installed with a hex nut (provided) behind panel to prevent damage during installation. Ideal for marine/recreational equipment and weather-resistant applications. Internal O-ring design for moisture and dust resistance. Double insulated...

Romex Type UF-B Building Wire, Wire Size: 14 AWG, 50 ft L, Number of Conductors: 2, Strands per Conductor: 2, Conductor Material: Copper, Conductor Insulation: PVC, Stranded/Solid: Stranded, Sheath Material: Nylon, Sheath Color: Gray, 600 V, 15 A, Operating Temperature: 90 deg C Southwire®...

Southwire® copper UF-B cable is generally used as feeder to outside post lamps, pumps and other loads or apparatus fed from a distribution point in an existing building as specified in the 2011 National Electrical Code. UF-B cable may be used underground, including direct...

For bringing power to a light fixture, ceiling fan, smoke detector or other round based fixtures.

Southwire Underground Feeder Cable with Ground, Wire Size: 14 AWG, 25 ft L, Number of Conductors: 2, Conductor Material: Copper, Sheath Material: PVC, Sheath Color: Gray, 600 V, Operating Temperature: 90 deg C

Access pull point for cable in tight radius. Allows conduit changes in direction. Won't rust or corrode. Gasket included. 1/2 in to 3/4 in Non-metallic access pull elbow with reducer bushings.

Engineered for value, Homeline™ circuit breakers are designed for fast installation, reliability and great circuit protection. With industry leading innovations and exclusive features, Square D Homeline circuit breakers are the smart, safe, reliable choice. Homeline 60 A two-pole circuit breaker Plug-on design, easy to...

Engineered for value, Homeline™ circuit breakers are designed for fast installation, reliability and great circuit protection. With industry leading innovations and exclusive features, Square D Homeline circuit breakers are the smart, safe, reliable choice. Homeline 50 A two-pole circuit breaker Plug-on design, easy to...

Carlon® manufactures the most complete line of non-metallic conduit fittings in the electrical industry. Carlon Plus 40® and Plus 80® conduits are designed for use aboveground and underground as described in the National Electrical Code. Ease of installation Impact-resistant Corrosion-resistant Removable cover with plate...

Rigid non-metallic Type LB conduit body. For easy access and pulling of wires through conduit run. For use with Schedule 40 non-metallic solvent weld fittings. Will not rust or corrode. With textured lid and foam-in-place gasket. Hubs are not threaded. UL listed, RoHS Compliance....

CIRCUIT BREAKER 1POLE 1IN 30A

Connects grounding wire to the grounding rod. Approved for direct burial in ground and concrete

Use to cover exposed knock-out holes in steel outlet boxes and other metal enclosures. Use to cover exposed knockout holes in steel outlet boxes and other metal enclosures

Aluminum die-cast. Indoor or outdoor applications. Use in an overhead service entrance. Mounts on top of EMT, Rigid or IMC conduit. Serves as a connecting point for the service entrance wires. UL listed meets CSA requirements. Tray boxed.

Aluminum die-cast. Indoor or outdoor applications. Use in an overhead service entrance. Mounts on top of rigid or IMC conduit. Serves as a connecting point for the service entrance wires. UL listed. Tray boxed.

Use to reduce the size of the conduit hole knockout opening in a steel outlet box or other metal enclosure. Must use one inside the enclosure opening and one on the outside. UL listed and CSA certified.

Aluminum die-cast. Indoor or outdoor applications. Use in an overhead service entrance. Mounts on top of EMT, Rigid or IMC conduit. Serves as a connecting point for the service entrance wires. UL listed meets CSA requirements. Tray boxed.

Connects grounding wire to the grounding rod. Approved for direct burial in ground and concrete

Use to reduce the size of the conduit hole knockout opening in a steel outlet box or other metal enclosure. Must use one inside the enclosure opening and one on the outside. UL listed and CSA certified.

Zinc die-cast. Indoor or outdoor applications. Use to reduce the entry size of a run of threaded conduit. UL listed. Use to reduce the entry size of a run of threaded conduit

Zinc die-cast. Indoor or outdoor applications. Use to reduce the entry size of a run of threaded conduit. UL listed. Use to reduce the entry size of a run of threaded conduit

Copper-free die-cast aluminum. Indoors or outdoors. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC) and maintenance. UL approved. Tray boxed.

Indoor or outdoor applications. Use to secure rigid or I.M.C. conduit to wood, masonry or similar surfaces.

Copper-free die-cast aluminum. Use to gain access to the interior of a raceway for wire pulling, inspection and maintenance. UL listed. Tray boxed. Use to gain access to the interior of a raceway for wire pulling, inspections and maintenance

Indoor or outdoor applications. Use to secure rigid or I.M.C. conduit to wood, masonry or similar surfaces.

Zinc die-cast. Indoor or outdoor applications. Use to reduce the entry size of a run of threaded conduit. UL listed. Use to reduce the entry size of a run of threaded conduit

Copper-free die-cast aluminum. Use to gain access to the interior of a raceway for wire pulling, inspection and maintenance. UL listed. Tray boxed. Use to gain access to the interior of a raceway for wire pulling, inspections and maintenance

Steel, indoor or out. Use to join threaded Rigid or IMC conduit together. UL listed. Use to join threaded rigid or IMC conduit together

Steel, indoor or out. Use to join threaded Rigid or IMC conduit together. UL listed. Use to join threaded rigid or IMC conduit together

Use to allow a 90 deg change of direction in a run of rigid or IMC conduit. UL listed. Use to allow a 90 deg change of direction in a run of rigid or IMC conduit

Zinc die-cast. Indoor or outdoor applications. Use to terminate threaded conduit to a knockout box or enclosure, where space within the box is limited. Used with a locknut to provide a short raceway between boxes or enclosures. UL and CSA approved. Use with a...

Use to allow a 90 deg change of direction in a run of rigid or IMC conduit. UL listed. Use to allow a 90 deg change of direction in a run of rigid or IMC conduit

Halex Liquidtight Quick-Set Connector, Trade Size: 3/4 in, Compression Connection, PVC, Gray, 2.79 in L, Suitable for: Type B Non-Metallic Liquid Tight Conduits, Additional Information: 90 deg Angle

Halex Liquidtight Quick-Set Connector, Trade Size: 3/8 in, Compression Connection, PVC, Gray, 2.37 in L, Suitable for: Type B Non-Metallic Liquidtight Conduit, Additional Information: 90 deg Angle

Fitting will not rust or corrode. No disassembly required. Reusable, hand tightened nut. Use to connect type B non-metallic liquidtight conduit to a weather-proof outlet box, pool/spa equipment motor, central air conditioning unit or various other electrical enclosures or hubs. UL approved. Fitting will...

Halex Non-Metallic Connector, 3/8 in Trade, Push-In Connection, Nylon, 12-3/8 in Length, Additional Information: 6-1/8 in H x 4-1/8 in W Dimensions Snap-in design for quick, easy two-step installation and no locknuts required Dry location Only one non-metallic cable should go through

Fitting will not rust or corrode. No disassembly required. Reusable, hand tightened nut. Use to connect type B Non-metallic liquid tight conduit to a weather-proof outlet box, pool/spa equipment motor, central air conditioning unit or various other electrical enclosures or hubs. UL approved. Fitting...

Halex Liquidtight Quick-Set Connector, Trade Size: 1/2 in, Compression Connection, PVC, Gray, 2.37 in L, Suitable for: Type B Non-Metallic Liquid Tight Conduits, Additional Information: 90 deg Angle

Fitting will not rust or corrode. No disassembly required. Reusable, hand tightened nut. Use to connect type B Non-metallic liquid tight conduit to a weather-proof outlet box, pool/spa equipment motor, central air conditioning unit or various other electrical enclosures or hubs. UL approved. Fitting...

Halex Clamp Connector, Trade Size: 3/4 to 1 in, Steel, Galvanized, 1-3/4 in L, 3/4 in W, 1-21/32 in H, Suitable for: 0.2 to 0.85 in Dia Non-Metallic Cable No locknut is required

Halex Clamp Connector, Trade Size: 1-1/4 in, Zinc, 2-1/8 in L, 1-1/4 in W, 2-1/8 in H, Suitable for: #6/3 to #2/3 AWG Non-Metallic Cable, 0.8 to 1.35 in Dia Flex Cord or (3) Conductor or (3) #1/0 Minimum to (3) Conductor or (3)...

Zinc die-cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to a steel outlet box or other metal enclosure. UL listed.

Halex Clamp Connector, Trade Size: 1 in, Zinc, 1-29/32 in L, 1-1/8 in W, 1-11/16 in H, Suitable for: #14/2 to #6/3 AWG or #3/10/3 AWG Non-Metallic Cable or 0.45 to 0.73 in Dia Flex Cord

Zinc die-cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to a steel outlet box or other metal enclosure.

Zinc die-cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to a steel outlet box or other metal enclosure.

Zinc die-cast. Use to join two pieces of flexible metallic conduit (Greenfield) together.