Southwire® SIMpull® THHN® copper conductors are primarily used in conduit and cable trays for services, feeders and branch circuits in commercial or industrial applications as specified in the National Electrical Code. Voltage for all applications is 600 V. SIMpull® THHN® copper conductors are designed...

Romex Building Wire, THHN, Wire Size: 14 AWG, 500 ft L, Number of Conductors: 1, Conductor Material: Copper, Conductor Insulation: Thermoplastic, Stranded/Solid: Solid, Sheath Material: Nylon, Sheath Color: Green, 600 V, 15 A, Operating Temperature: 90 deg C Southwire® SIMpull THHN® copper conductors are...

Romex Building Wire, THHN, Wire Size: 14 AWG, 500 ft L, Number of Conductors: 1, Conductor Material: Copper, Conductor Insulation: Thermoplastic, Stranded/Solid: Solid, Sheath Material: Nylon, Sheath Color: Red, 600 V, 15 A, Operating Temperature: 90 deg C Southwire® SIMpull THHN® copper conductors are...

Quality electrical tape designed for general-purpose electrical applications. The vinyl tape is a tough, with an extremely durable adhesive ability. Gardner Bender electrical tape can be used in various electrical applications that require an added protection for a terminal connection. GB's electrical tape is...

Standard meter center, all-in-one, 1 in BR branch breaker type, EUSERC, 25 KAIC, 12/24 distribution, BR2100 main breaker included. Bottom and top feed, ring style, UG/UG service. Rainproof enclosure. 5-3/8 in D x 14-7/16 in W x 23-7/8 in H.

Used to connect mobile homes to a supply of electricity where permanent wiring is required as specific by NEC Article 550-24 and complies with NEC Article 338-1. Compact Stranded 8000 Series aluminum alloy. 600 V. Cross-linked, polyethylene (XLPE). Types USE-2/RHH/RH, W-2. Approved for direct...

For mounting phone, fax, cable and audio connections (not for power).

fiberglassBOX Switch/Outlet Box, Knockout Cable Entry, 2 Outlets, 4 Knockouts, 1 Gangs, Rectangular Shape, 16 cu-in, Dimensions: 3-1/4 in H x 2-3/8 in W x 2-7/8 in D, Fiberglass/Polyester, Off-White, Bracket Mounting Machine tapped device holes, rigid hard box construction, no distortion with high...

Heavy-duty. Protects critical motor circuits or motors that cycle On/Off frequently. Body sizes prevent interchangeability and dangerous over-fusing. Dual element design, industrial/commercial-grade, spring loaded to provide short circuit and overload protection. Non-transferring. Will thread into SA adapters. UL Listed. 125 V maximum. 10,000 AIR....

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant. Manufactured to NEMA TC-2, Federal specification WC1O94A and UL 651 specifications. UL 651 Listed to the NEC by the ETL, UL listed.

Side wire terminals accept up to number 10 solid or stranded wire. Rated for fluorescent lighting fixtures typical in commercial applications. 0.050 in thick steel mounting strap zinc-plated for corrosion resistance. Ground screw terminal standard. Meets all UL 20 requirements, Federal specifications WS896. Patent...

Heat shrink tubing insulates and protects in-line electrical components. When heat is applied, the tubing contracts around the wire, providing insulation and resistance to abrasion. Parts are easy to install Non-insulated, corrosion-resistant

Longer, wider strap on toggle switches provides 40% more contact area to wallboard. Virtually eliminates floating installations. Industrial design cam action mechanism insures quiet switch action. Patented built-in wire stripper for #14 and #12 wire to speed installation. Unbreakable top and bottom housing eliminates...

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant. UL listed E35297.

Cutler-Hammer Main Lug Kit, 120/240 VAC, 200 A, 1 to 300 kcmil Wire

For bringing power to a light fixture, ceiling fan, smoke detector or other round based fixtures. Bring power to fans and other round based fixtures

Includes installation hardware, gasket and multi-lingual instructions. 3-hole covers are supplied with two closure plugs. Die-cast zinc construction. Three 1/2 in NPT holes. UR - Underwrites recognized component CSA C22.2 No. 18 compliant. State-of-the-art powder coat finish provides maximum weatherability and scratch resistance Three...

Cartridge fuses are used to protect motors and branch circuits where higher amps or volt ratings are required. General-Purpose fuses have no time-delay and protect fuse panels, appliances and branch circuits. Protect lighting, heating and other circuits not subject to temporary surges and where...

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant. SCH 40. UL 651 Listed to the NEC by the ETL, UL listed.

Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure.

Colors to match wallplates. 6/32 in x 1/2 in. UL listed.

These indoor surface mount transfer switches are designed for fast installation in residential and commercial applications. The 18 in flexible conduit whip attaches easily to the load center and all wires are clearly marked. Simply select the circuits needed in an emergency and connect...

Midget fuses are 13/32 in x 1-1/2 in cartridge fuses in a wide variety of volt and amp ratings to provide supplemental protection to industrial, commercial, agricultural, heating, ventilating and air conditioning equipment. Small size midget fuses often protect control circuit wiring, motor control...

A NO.263 reducer installed on the fuse permits it to be installed in a 60 A fuse block. Reducers are particularly useful when equipment is being converted. Proper protection can be maintained without the expense of replacing the fuse block. Fuse reducers allow a...

Midget fuses are 13/32 in x 1-1/2 in cartridge fuses in a wide variety of volt and amp ratings to provide supplemental protection to industrial, commercial, agricultural, heating, ventilating and air conditioning equipment. Small size midget fuses often protect control circuit wiring, motor control...

Midget fuses are 13/32 in x 1-1/2 in cartridge fuses in a wide variety of volt and amp ratings to provide supplemental protection to industrial, commercial, agricultural, heating, ventilating and air conditioning equipment. Small size midget fuses often protect control circuit wiring, motor control...

Standard duplex receptacles feature longer, wider straps providing 40% more contact area to the wallboard. Virtually eliminates floating installations. Patented built-in wire stripper for #14 and #12 wire to speed installation. Patented built-in wire looper for pre-looping. Tri-combo screws accept slotted, Philips and Robertson...

Glass tube. Plated brass end caps. 1/4 in x 1-1/4 in, 250 VAC rating maximum. UL Listed.

Glass tube. Plated brass end caps. 1/4 in x 1-1/4 in. 250 VAC rating maximum. UL listed.

GB™ LeverGard wire connectors have the ability to secure both stranded and solid wire. These lever connectors provide the ideal solution for a wide variety of wire sizes. The versatility of these connectors makes them a must for any electrician. The clear body design...

GB™ LeverGard wire connectors have the ability to secure both stranded and solid wire. These lever connectors provide the ideal solution for a wide variety of wire sizes. The versatility of these connectors makes them a must for any electrician. The clear body design...

GB™ LeverGard wire connectors have the ability to secure both stranded and solid wire. These lever connectors provide the ideal solution for a wide variety of wire sizes. The versatility of these connectors makes them a must for any electrician. The clear body design...

Gardner Bender wire connectors are engineered to exceed the expectations of professional electricians. Ideal for commercial or residential applications GB™ wire connectors offer world class quality, performance and application versatility. Our connectors provide maximum application flexibility by offering contractors and do it yourselfers myriad...

Zinc die-cast. Use as an offset connector between two enclosures. Offsets the axis of the raceway 3/4 in. UL approved. Offsets the axis of the raceway by 3/4 in

High dielectric plastic. Use to protect wire within flexible metallic conduit (Greenfield, BX). Insert one bushing at each end of conduit. UL approved. No 75400 fits cable range of 14/2, 14/3, 12/2 no 75401 fits cable range of 14/4, 12/3, 6/1, 4/1. No 75402...

Used to secure low voltage wiring or coaxial cable.

Used to secure low voltage wiring or coaxial cable.

Ceiling box with captive nails, ground lug and screw attached. Fixture spacing for 2-3/4 and 3-1/2 in. 6 integral clamps. Listed for fixture support up to 50 lb. 4 in Dia x 2-1/4 in D. UL listed. Meets NEMA OS-2. All ceiling boxes are...

Zinc die-cast. Use as an offset connector between two enclosures. Offsets the axis of the raceway 3/4 in. UL approved.

Provides compliance with 2011 NEC Article 406.12 that states that all receptacles installed in dwelling units must be tamper-resistant. Durable impact-resistant thermoplastic face and back body is virtually unbreakable. "TR" designation provides visual identification. Terminal screws are backed out and ready to wire. Extra-long...

Molded from non-flammable polycarbonate. Virtually unbreakable, with high-structural rigidity, long-term form retention and excellent impact and abrasion resistance. Screwless mid-size duplex receptacle plate, clearly marked top edges, clip easily into place with gentle pressure. Mid-sized to cover wall imperfections and large wallboard openings. Mid-size...

Bussmann Fast Acting Fuse, 3 A, Body Material: Glass, 3 mm Dia, 5 mm L

Bussmann Fast Acting Fuse, Electronic, 3 A, 3 mm Diameter, 5 mm Length Useful year round, these fuses come in handy for keeping the lights on and the festivities going strong

Connecticut Electric RV/EV power outlet. Features heavy-duty steel construction with powder coat finish in a 3R rainproof enclosure. Outlet NEMA 14-50 receptacle.

Enables line voltage and low-voltage to run to the same location. Uses standard 2-gang faceplate. Backless design accommodates large/deep low voltage devices. 3.69 in x 4.04 in. 20.5 cu-in capacity. UL approved. Accepts a two-gang faceplate 3/4 in Resi rings Backless design accommodates large/deep...

Turn the dial to the desired running time and the connected light or appliance will shut-off at the set time. Replaces a standard light switch and fits a standard decorator switch plate. Compatible with compact fluorescent bulbs.

The Gardner Bender™ quick and always-reliable crimp-type wire terminals feature color coded barrels denoting industry standard wire gauge sizes. Available in ring, spade, disconnect and bullet styles. Vinyl insulated barrels provide a high-degree of protection and carry a maximum 600 V rating. Temperature ratings...

Sub feed lug kit. 125 A. 2-pole. Lugs to sub feed to another panel. 125 A Sub feed lug uses 2 spaces

WireGard™ twist-on wire connectors are designed for general-purpose applications requiring the connection of 2 or more copper wires. WireGard™ connectors feature a straight type polypropylene shell with side knurling for an easy grip. The inner spring is zinc-plated to resist corrosion and has a...

Pump cable, type THW, thermoplastic (PVC) insulated, 600 V. All wire insulated.