Single conductor, features high-strength, low resistance aluminum construction. Accepts wire from number 14 to number 10 ga AWG stranded and number 14 to number 2 ga AWG solid. UL Listed. 2/CD. Mechanical lug features high-strength, low resistance aluminum construction Use GB OX-GARD antioxidant treatment...

Combination meter socket. 200 A main breaker installed, Single phase, 3-wire, Insta-Wire™ neutrals. Four spaces and eight circuits. 120/240 V. 22,000 AIC rating. Four jaws. Tin-plated copper bus bars. NEMA type 3R outdoor enclosure. Overhead or underground feed. Feed thru lugs provided. Key hole...

Swept-back wing design, increases torque ability, makes twisting easier. Deep surface ridges provide a good grip. Flame-retardant thermoplastic shell provides excellent electrical insulation. Threaded funnel entry guides the wires into the connector easily, pre-twisting of wires is not necessary. Square wire spring provides secure...

Side wire terminals accept up to number 10 solid or stranded wire. Rated for fluorescent lighting fixtures typical in commercial applications. 0.050 in THK steel mounting strap zinc-plated for corrosion resistance. Ground screw terminal standard. 20 A, 120/277 V. Meets all UL 20 requirements,...

Accepts GFCI, duplex, switch and up to 1-3/8 in round devices. Non-conductive, Non-corrosive and impact -resistant. Won't rust or fade. Scratch-resistant. For use in wet/damp locations. Keyhole mounts, loosen the existing device screws and slide the cover over. Comes with adapter plates and pre-adhered...

Our flat screen TV cord cover kit makes it a snap-to hide wires. It's very easy to install and can be painted to blend seamlessly into any wall. To add a component, snap-off the cover, add the cables and snap the cover back on....

Rated for all underground direct bury applications. Use on all lighting, irrigation and underground wiring. Additional sealant for long term service. No junction box needed. 600 V maximum with building wire, 1000 V in fixtures and signs. #8 to #22 wire range. UL 486D...

Screwless mid-size switch plate wallplates are virtually unbreakable and present a clean, minimalist look that can be changed in seconds. Easy installation, simply screw the mounting plate onto the wiring device and press into place. Polycarbonate toggle screwless wallplates appear to float freely on...

Receptacles provide compliance with 2011 NEC Article 406.12 that states that all receptacles installed in dwelling units must be tamper-resistant. Durable impact-resistant thermoplastic face and back body is virtually unbreakable. "TR" designation provides visual identification. Terminal screws are backed out and ready to wire....

Steel, indoor or out. Use to join threaded Rigid or IMC conduit together. UL listed. Use to join threaded rigid or IMC conduit together

High-impact thermoplastic. Flame retardant to 105 deg C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL listed and CSA approved. The rounded...

Zinc die-cast. Use as an offset connector between two enclosures. Offsets the axis of the raceway 3/4 in. UL approved. Offsets the axis of the raceway by 3/4 in

For most residential wiring devices. For installing a shallow switch or outlet. 1 in D.

UL listed (file no.E18704). Meets all CSA requirements, C22.2 no.111. For use in fixtures, appliances and equipment. Shank is threaded 15/32 in - 32 x 15/32 in long. Keyed shank, hex nut and finishing nut furnished. 6 wire lead terminals, number 18, stripped 3/4...

Ultrasonic welding and integrated construction of the strap and body. Back wire clamps on the side terminals for installation of #12 and #14 wire. Thermoplastic rocker, top and back body are virtually unbreakable. Screws accept slotted, Phillips and Robertson head tools for installation in...

Ultrasonic welding and integrated construction of the strap and body. Back wire clamps on the side terminals for installation of #12 and #14 wire. Thermoplastic rocker, top and back body are virtually unbreakable. Screws accept slotted, Phillips and Robertson head tools for installation in...

Eaton wiring devices in metallic finish are the ideal way to add a sophisticated accent to your home. Designed to match the style of contemporary hardware and appliances, these devices and wallplates add a touch of elegance to any room. Match your wiring devices...

Decorator heavy-duty-grade combination device features 15 A 120 V switch and tamper-resistant 15 A receptacle. Features UL listed tamper-resistant shutters designed to prevent the insertion of foreign objects. TR7730 switch is horsepower-rated for motor loads per UL 20. Thermoplastic rocker, top and backbody are...

TAPE LIQ ELEC 4OZ BLK

Use to protect internal wire runs from nail punctures, as defined in the NEC Article 300-4.

For wet locations. Gasket, screws and plugs included. 4 in cluster cover. Die-cast zinc. Three 1/2 in NPT holes. UL listed. Rugged die-cast construction State-of-the-art powder coat finish provides maximum weatherability and scratch resistance Three hole covers supplied with two closure plugs

Smooth color saddle prevents damage to insulation. Secures round and flat cable. Legs have 2 barbs for holding strength in wood. For use in CableBoss staple gun.

Longer, wider strap on toggle lighted switches provides 40% more contact area to wall board. Virtually eliminates floating installations. Industrial design cam action mechanism insures quiet switch action. Patented built-in wire stripper for #14 and #12 wire to speed installation. Unbreakable top and bottom...

Indoors. Use to join two lengths of EMT conduit together.

Gardner Bender Wire Connectors are engineered to exceed the expectations of professional electricians. Ideal for commercial or residential applications GB™ Wire Connectors offer excellent quality, performance and application versatility. Our connectors provide maximum application flexibility by offering contractors and do it yourselfers a wide...

Die cast zinc with porcelain socket. For wet locations. Use 75 to 150 W maximum, PAR-38 lamps. Includes gaskets and locknuts. UL listed. Rugged die-cast construction State-of-the-art powder coat finish provides maximum weatherability and scratch resistance Locking swivel knuckle allows positive lamp positioning and...

Halex Rigid Reducing Washer, Trade Size: 2 x 1 in, Steel, 1.37 in Dia Inside, 3 in Dia Outside, 0.0315 in Thick

Halex Rigid Reducing Washer, Trade Size: 1-1/4 x 3/4 in, Steel, 1.11 in Dia Inside, 2.18 in Dia Outside, 0.0315 in Thick

68305B WASHER REDUCING 1INTO1/

Halex Rigid Reducing Washer, Trade Size: 2 x 1/2 in, Steel, 0.87 in Dia Inside, 3 in Dia Outside, 0.0315 in Thick

Halex Rigid Reducing Washer, Trade Size: 1-1/2 x 3/4 in, Steel, 1.11 in Dia Inside, 2.44 in Dia Outside, 0.0315 in Thick

Halex Rigid Reducing Washer, Trade Size: 1-1/4 x 1 in, Steel, 1.37 in Dia Inside, 2.18 in Dia Outside, 0.0315 in Thick

Halex Rigid Reducing Washer, Trade Size: 1-1/4 x 1/2 in, Steel, 0.87 in Dia Inside, 2.18 in Dia Outside, 0.0315 in Thick

Halex Rigid Reducing Washer, Trade Size: 1-1/2 x 1/2 in, Steel, 0.87 in Dia Inside, 2.44 in Dia Outside, 0.0315 in Thick

Halex Rigid Reducing Washer, Trade Size: 3/4 x 1/2 in, Steel, 0.87 in Dia Inside, 1.43 in Dia Outside, 0.0315 in Thick

Halex Rigid Reducing Washer, Trade Size: 1 x 3/4 in, Steel, 1.11 in Dia Inside, 1-3/4 in Dia Outside, 0.0315 in Thick

Use to reduce the size of the conduit hole knockout opening in a steel outlet box or other metal enclosure. Must use one inside the enclosure opening and one on the outside. UL listed and CSA certified.

Halex Conduit Hanger with Bolt and Nut, Trade Size: #6, Steel, Zinc-Plated, Suitable for: 2-1/2 in EMT/Rigid Conduit, Includes: Bolt and Nut

Thermoplastic PVC jacket, not for hard usage in accordance with NEC. Used for lamps, small appliances and radios. Soft annealed stranded copper per ASTM B3-90 conductor. 300 V maximum. PVC insulation and UL62, UL1581 listed. Spool. Thermoplastic PVC jacket, not for hard usage in...

Thin wall heat-shrink tubing is constructed from durable, flame-retardant black polyolefin which is resistant to both solvents and fluids making it ideal for cable insulation, repair, marking or bundling. Heat shrink not only provides superior mechanical, abrasion and moisture protection but also strengthens connections...

For cable insulation, marking and bundling, with superior mechanical, abrasion and moisture protection. Flame retardant, meets UL 224 VW-1. Resists common fluids and solvents. 2:1 shrink ratio. 3 in L.

For installing speed controls for ceiling fans dimmer switches, standard switches and outlets. 1 in deep.

Easy-on, easy-off without tools. Wings are knurled for a surer grip and offset from the centerline for greater twisting leverage. Easily removed for repeat usage on same size combination or larger. Expandable square-wire plated spring instantly adjusts to the shape and size of the...

Made of a highly durable plastic (PVC) compound making the product non-metallic and safe to install. Elbow is non-corrosive, rust-proof and easily pliable. Good for those applications that requires change of direction. UL listed. Maintains round shape throughout bend Fully assembled and ready-to-use 0...

Steel, use to secure BX cable to wood, masonry or similar surface.

Non-metallic white ceiling box cover, flat and blank. 4 in Dia. UL listed.

Offers same chemical resistance as carbon non-metallic conduit for a complete, corrosion-resistant system. UV-resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts and 2 washers. Gray clamps for standard conduit. Non-metallic...

Highly versatile heavy-duty timers are ideal for any application that requires a simple or complex On/Off schedule, regardless of load. No neutral connection is required. Versatile 7 day programmable schedules with up to 40 On/Off events Astronomic clock feature determines dawn and dusk times...

Old work wall case. Safe, non-conductive. Two zip-mount retainers. Four integral clamps, two each end, mounting ears. 14 cu-in, 2-3/4 in x 2-1/4 in x 4-1/8 in. UL listed.

Zinc die-cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to a steel outlet box or other metal enclosure.