Interchangeable, will replace: Bryant, Challenger and Westinghouse. Type BR. 120/240 V. 10 kAIC, 10,000 AIR. 2 spaces, 2 in per breaker. All BR circuit breakers have rejection tab feature Units feature a quick-make, quick-break switch mechanism combined with inverse time element tripping operation and...

Interchangeable, will replace: Bryant, Challenger and Westinghouse. Type BR. 120/240 V. 10 kAIC, 10,000 AIR. 2 spaces, 2 in per breaker. All BR circuit breakers have rejection tab feature Units feature a quick-make, quick-break switch mechanism combined with inverse time element tripping operation and...

Molded from Non-flammable thermoset. Flush fitting, warp-resistant design. Screw catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High-gloss finish is soil -resistant. Standard size - 4-1/2 in x 4.563 in, boxed. Thermoset duplex receptacle exclusive timesaving screw-catch feature holds mounting...

Cutler-Hammer Circuit Breaker, Type BR, 120/240 V, 60 A, Operating Frequency: 50/60 Hz, Number of Phases: 1, Number of Poles: 2, Interrupt Rating: 42 kA, Wire Size: 8 to 1/0 AWG, Plug Mounting, Dimensions: 2.93 in L x 1.96 in W x 2.92 in...

The Gardner Bender 1/2 in heat shrink tubing provides abrasion and moisture protection for electrical wire and cable. This tubing is constructed of flame-retardant polyolefin. Visual and audible indicators signal presence of voltage, by pressing pocket clip Built-in safe test feature assures batteries are...

The Gardner Bender 1/2 in heat shrink tubing provides abrasion and moisture protection for electrical wire and cable. This tubing is constructed of flame-retardant polyolefin. 18 to 10 AWG wire size Ergonomic wings 600 V rated Excellent product to repair appliance, extension or small...

Molded from Non-flammable Polycarbonate. Virtually unbreakable, with high-structural rigidity, long term form retention and great impact and abrasion resistance. Screw catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil -resistant. Mid size 3-1/8 in x 4-7/8...

Four each 12-10 AWG #10, 3/8 in, 9 each 16-14 AWG #12, 11 each 22-18 AWG #10, 16-14 AWG #6, #8, 16-14 AWG #10 stud ring terminals, 11 each 22-18 AWG #8, #10, 16-14 AWG #6, #8, #10 stud spade terminals, 4 each 12-10...

Gardner Bender provides a complete line of staple and fastening solutions for all industries, including industrial, residential, construction or manufacturing. From low-voltage wire to service entrance cables, professionals rely on Gardner Bender for quality fastening products. The 1/2 in blue polyethylene and metal insulated...

The Gardner Bender 1/2 in graphite metal staples 24 PK are ideal for securing non-metallic cable. These staples feature durable metal construction with a graphite metallic finish. The recessed heads help protect your cable and the sharp tips offer an easy start. These staples...

Thin wall heat shrink tubing is constructed from durable, flame-retardant black polyolefin which is -resistant to both solvents and fluids making it ideal for cable insulation, repair, marking or bundling. Heat shrink not only provides great mechanical, abrasion and moisture protection but also strengthens...

Thin wall heat shrink tubing is constructed from durable, flame-retardant black polyolefin which is -resistant to both solvents and fluids making it ideal for cable insulation, repair, marking or bundling. Heat shrink not only provides great mechanical, abrasion and moisture protection but also strengthens...

These plastic Kwik Clips are specially designed clips that are great for mounting bundles, cables, cords, tools. To drywall, wood and painted surfaces. They feature a ratcheting and releasable function that allows adjustment to a range of bundle diameters and also contain a self-adhesive...

The Gardner Bender 3/16 in heat shrink tubing (eight-Pack) provides abrasion and moisture protection for electrical wire and cable. This tubing is constructed of flame-retardant polyolefin. Provides excellent protection from mechanical abrasion and moisture Flame-retardant polyolefin construction resists common fluids and solvents Repairs, strengthens...

Gardner Bender provides a complete line of staple and fastening solutions for all industries, including industrial, residential, construction or manufacturing. From low-voltage wire to service entrance cables, professionals rely on Gardner Bender for quality fastening products. Our staples are designed to offer fast and...

Specifically designed for making positive ground connections with a hole in the tip of the connector to feed ground wire through. GreenGard connectors feature the same live-action as GB WingGuard connectors with knurled wings for a sure grip and greater twisting leverage/torque. In addition...

Insulated metal staples secure a large variety of cable types including NM, BX, MC, AC and UF cables. These staples offer a durable polyethylene insulating sheath to prevent arc faults if the staple is over-driven through a cable jacket. Strong steel constructed staples offer...

The vinyl tape is a tough, with an extremely durable adhesive ability. Gardner Bender electrical tape can be used in various electrical applications that require an added protection for a terminal connection. GB's electrical tape is made from low lead PVC material, is -resistant...

The Gardner Bender 3/4 in heat shrink tubing provides abrasion and moisture protection for electrical wire and cable. This tubing is constructed of flame-retardant polyolefin. Tests for 7 common wiring errors plus GFI circuits Built-in GFCI test button, test both standard and GFCI receptacles...

Thermoset telephone and coax exclusive timesaving screw catch feature that holds mounting screws captive and simplifies installation. Non-flammable thermoset phenolic or urea Flush fitting, warp-resistant design Matching mounting screws provided 1-3/8 in first gang to edge 1.81 in gang to gang

These plastic Kwik Clips are specially designed clips that are great for mounting bundles, cables, cords, tools and more to drywall, wood and painted surfaces. They feature a ratcheting and releasable function that allows adjustment to a range of bundle diameters and also contain...

Thermoset telephone and coax exclusive timesaving screw-catch feature that holds mounting screws captive and simplifies installation.

State-of-the-art powder coat finish provides maximum weatherability and scratch resistance. Self-closing lids assure weatherproof protection when the receptacle is not in use. Installation hardware, gasket, multi-lingual instructions included. For single 1-13/32 in Dia receptacle. UL listed for wet location with cover closed. Rugged metallic...

Adhesive-lined butt connectors are specially designed for waterproof heat shrink applications. Our butt splices provide quick and reliable crimp-type connections and wire repairs. Simply crimp both ends for a long-lasting, secure connection. Insulates and protects connections from wire pullout, moisture intrusion and abrasion Heat...

This tool and terminal kit includes a handy tool that cuts and strips copper or aluminum solid and stranded wire, crimps coax and cuts and rethreads bolts. Kit also includes the most popular sizes and types of terminals for jobs around the house and...

Hubbell Replacement Gasket, Polyethylene Foam, Black, 4-5/8 in L, 2.875 in W, 1/8 in Thick, Suitable for: Bell® Weatherproof Covers and Lampholders Each gasket has cut outs for a toggle switch, GFCI and round receptacles It is one-gang, multi-purpose and weatherproof

With mounting ears and 2 swing clamps. Suitable for masonry walls, UL listed, not UL Classified for fire resistance. 2-3/4 in D x 3-1/8 in x 3-15/16 in. PVC construction for easier installation, greater performance and lower installation cost

These copper split bolt connectors have all-copper alloy construction for high-mechanical strength, maximum conductivity and low resistance. Accept a wide range of solid and stranded conductors from 16 to 3/0 AWG Can be torqued with standard wrenches

Kit includes sleek multi-use stripper-crimper, 100 assorted insulated terminals in a convenient 11 compartment reclosable storage and carrying case.

Protects hoses, wire and cables from cuts, abrasions and UV wear. Corrugated for added flexibility. Split down the center for wire breakout where needed. Black.

Gardner® Bender switches are available in many different styles and sizes. They are used in countless applications, from basic on-off to Multi-function applications. Most of our electrical switches are suitable for marine, industrial or auto-motive applications. They are available in a variety of characteristics...

The Gardner Bender 1/2 in blue plastic metal insulated staples for 14/2 and 12/2 cable 100-pack fasten electrical cable to wood surfaces. These staples offer a plastic sheath to prevent arc faults if the staple is over-driven through a cable jacket. Durable polyethylene insulator...

These copper split bolt connectors have all-copper alloy construction for high-mechanical strength, maximum conductivity and low resistance. Accept a wide range of solid and stranded conductors from 16 to 3/0 AWG Can be torqued with standard wrenches

Gardner Bender plastic clamps are tough, durable, yet extremely lightweight and feature clean, smooth edges to minimize damage to cables. Our contractor-friendly design facilitates quick installations saving time and money. Clamps securely hold harnesses, cables and tubing up to 1/4 in (6 mm) Dia....

Gardner Bender switches are used in countless applications, from basic On/Off to multi-function applications. Most of our electrical switches are suitable for marine, industrial or automotive applications. They are available in a variety of characteristics including actuator-type, handle shape, body construction and size, terminal-type,...

These copper split bolt connectors have all-copper alloy construction for high-mechanical strength, maximum conductivity and low resistance. Accept a wide range of solid and stranded conductors from 16 to 3/0 AWG Can be torqued with standard wrenches

These copper split bolt connectors have all-copper alloy construction for high-mechanical strength, maximum conductivity and low resistance. Accept a wide range of solid and stranded conductors from 16 to 3/0 AWG Can be torqued with standard wrenches

For use with both aluminum and copper conductors. Rated for 600 V al or CU. Conductor range of GSPA-2 is 2-14. GSPA-O is 1/0-14. Galvanic corrosion is limited by an internal wire stop, preventing direct contact of dissimilar metals inside Prevents direct contact of...

Gardner Bender switches are used in countless applications, from basic on-off to Multi-function applications. Most of our electrical switches are suitable for marine, industrial or auto-motive applications. They are available in a variety of characteristics including actuator type, handle shape, body construction and size,...

The Gardner Bender 20 A or 10 A toggle switch features an O-ring and has screw terminals for quick-and-easy connections. The switch offers single-pole, single-throw (SPST) on-off circuitry in a classic bat handle design for easy usage. This switch is compatible with standard 1/2...

Gardner Bender plastic clamps are tough, durable, yet extremely lightweight and feature clean, smooth edges to minimize damage to cables. Our contractor-friendly design facilitates quick installations saving time and money. Clamps securely hold harnesses, cables and tubing up to 1/2 in (13 mm) Dia....

Gardner bender switches are used in countless applications, from basic On/Off to multi-function applications. Most of our electrical switches are suitable for marine, industrial or automotive applications. They are available in a variety of characteristics including actuator type, handle shape, body construction and size,...

The Gardner® Bender 8/4 A toggle switch with faceplate has an On/Off faceplate for ease of use. The switch is designed for medium-duty applications and has 1-pole, single-throw (SPST) on-off circuitry. The switch is compatible with standard 1/2 in. Mounting holes and features 6...

Gardner Bender Switches are used in countless applications, from basic On/Off to Multi-function applications. Most of our electrical switches are suitable for marine, industrial or auto-motive applications. They are available in a variety of characteristics including actuator type, handle shape, body construction and size,...

The Gardner Bender™ quick and always-reliable crimp-type wire terminals feature color coded barrels denoting industry standard wire gauge sizes. Available in ring, spade, disconnect and bullet styles. Vinyl insulated barrels provide a high-degree of protection and carry a maximum 600 V rating. Temperature ratings...

Gardner® Bender switches are available in many different styles and sizes. They are used in countless applications, from basic on-off to Multi-function applications. Most of our electrical switches are suitable for marine, industrial or auto-motive applications. They are available in a variety of characteristics...

Mounts in 13/32 in Dia hole. Two-position, 2 wire. (GSW-35 mounts in 1/2 in Dia hole). Number 18 AWG, 6 in stripped wire leads. Most of the electrical switches are suitable for marine, industrial or automotive applications

The Gardner Bender 6/3 A rotary switch features a brass knob to highlight your decor. The switch is compatible with a 13/32 in mounting hole and is ideal for use with lamps or other light-duty applications. This switch offers single-pole, single-throw (SPST) on-off circuitry...

Connects grounding wire to the grounding rod.

The Gardner® Bender 20/10 A toggle switch features an O-ring and has screw terminals for quick and easy connections. The switch offers 1-pole, single-throw (SPST) on-off circuitry in a classic bat handle design for easy usage. This switch is compatible with standard 1/2 in...