Made from cast metal, this stylish wallplate adds simple elegance to your decor. Decorating with wallplates is an economical way to make great impact in your home.

Indoor or outdoor use. Use to secure rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved.

Designed to compensate for length changes due to temperature variations in exposed conduit runs. 6 in maximum. Exclusive 2 in expansion fitting with an 8 in travel distance Two-piece molded design with lubricated seals for easier movement for the life of the product Ridges...

Duck Wrap-Fix can hold up to all types of weather conditions, making it ideal for fixes that need long-lasting hold and protection. This multi-use DIY tape is the perfect tool to have on hand for quick repairs around the home or jobsite. Just wrap...

Used to provide additional capacity. Die-cast aluminum construction. Includes installation hardware, closure plugs, gasket and multi-lingual instructions. Four 1/2 in threaded outlets. Accepts all threaded 1/2 in fittings and threaded conduit. 4 in round, 1-1/2 in D. UL listed, CSA, NEMA 3R rated. Shrink...

CONNECTOR OFFSET TO MTL BX.5IN

Gardner Bender plastic clamps are tough, durable, yet extremely lightweight and feature clean, smooth edges to minimize damage to cables. Our contractor-friendly design facilitates quick installations saving time and money. Clamps securely hold harnesses, cables and tubing up to 3/8 in (10 mm) Dia....

Tight, square-wire spring threads directly onto conductors for fast connections with no slip. Tightens without ratcheting, easily removed for repeat usage on same size combination or larger. Fluted shell surface permits a firm grip for easy finger-tight connections. Thermoplastic shell shields against environmental extremes....

Zinc die-cast. Use as a raceway between two steel outlet boxes or other metal enclosures. UL listed. Bulk packed. Use as a raceway between two steel outlet boxes or other metal enclosures

TAN HEXLOCK UNIV CONNECTOR

Halex Liquidtight Quick-Set Connector, Trade Size: 1 in, PVC/Zinc, Suitable for: 1/2 in Knockout Fitting will not rust or corrode No disassembly required, just hand-tighten nut It is reusable

Four knock-out type socket openings, 90 deg spacing. Includes separate mounting feet, cover and gasket. Non-conductive. will not rust or corrode. Four knockout type socket openings, 90 deg spacing

Use to reduce the size of the conduit hole knockout opening in a steel outlet box or other metal enclosure. Must use one inside the enclosure opening and one on the outside. UL listed and CSA certified.

Halex Conduit Hanger with Speed Thread, Trade Size: #1, Steel, Suitable for: 3/4 in EMT/Rigid Conduit

Halex Rigid Reducing Washer, Trade Size: 3/4 x 1/2 in, Steel

Made of Type 304 stainless steel alloy for superior non-magnetic corrosion-resistant properties. Plates are 0.032" thick. Brushed satin finish resists fingerprints. Matching stainless steel mounting screws provided. Standard size - 2.75" x 4.50", with 1.594" hole.

Halex Flex Conduit Connector, Trade Size: 3/8 in, Snap-In Connection, Steel, 1.38 in L, Suitable for: Aluminum and Steel Armored Cable with #14/2 to #10/2 Wire, Steel Flexible Metal Conduit, 0.45 Dia Aluminum Interlocked MC Cable, Includes: Insulating Bushing, Additional Information: 1/2 in Knockout...

Halex Conduit Hanger, #0 Trade, Steel, Suitable for: 1/2 in EMT or RGD Conduits.

Use to reduce the size of the conduit hole knockout opening in a steel outlet box or other metal enclosure. Must use one inside the enclosure opening and one on the outside. UL listed and CSA certified.

For use in wet, damp or dry locations. Three 1/2 in threaded outlets. 2 in deep with lugs. May be used as a weatherproof junction box or as a housing for receptacles, switches and GFCIs. Powder coat finish. Eight box mounting options with detachable...

Hubbell Closure Plug, Trade Size: 1/2 in, Zinc, Gray, 0.313 in L, Suitable for: BELL Weather-Proof Boxes, Extension Adapters, Cluster Covers and Round Splice Boxes to Seal Off Unused Outlets Die-cast zinc construction 1/2 in NPT thread

CULus listed, NOM certified.

Bolted water pipe clamps made from high-strength corrosion-resistant copper alloy. Connects grounding wire to the grounding rod. Range 10 solid to 2 stranded. UL listed. High-strength silicone bronze Used for connecting copper conductors to metallic water pipe or ground rods

Heavy-duty zip ties are hard-wearing and designed for rugged industrial, automotive and farm applications demanding high levels of tensile strength and large bundle diameters. Permanently secured until you cut them off GB ties lock tight without stretching or sliding. Made from durable 100% nylon...

Provides motor overload, ground fault and short-circuit protection. Helps protect motors against burnout from overloads and single phasing on three phase systems. Will hold an overload which is five times greater than the ampere rating of the fuse for a minimum of ten seconds....

Gardner Bender provides a complete line of staple and fastening solutions for all industries, including industrial, residential, construction or manufacturing. From low voltage wire to service entrance cables, professionals rely on Gardner Bender for quality fastening products. Our staples are designed to offer fast...

Offers same chemical resistance as carbon non-metallic conduit for a complete, corrosion-resistant system. UV-resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts and 2 washers. Gray clamps for standard conduit. Non-metallic...

High-impact-resistant thermoplastic rocker, top and back body. Injection molded housings and PVC resin, comply with UL94 V0 flammability ratings. Tri-combo screw heads, built-in wire stripper. Backwire clamps on side terminals for installation of #12 and #14 wire. Terminal screws are backed out for easier...

The Intersystem Bonding Termination (IBTB), part of the Vent nVent ERICO line of facility electrical protection products, is designed to meet the requirements of the 2008 NEC® Article 250.94 bonding for other systems. The IBTB is mounted adjacent to the meter base or service...

Mounting components for NM1 wire channel, including screws and anchors, wire clips and joint cover.

Standard size wallplates, nylon duplex receptacle rugged construction reduces installation cost due to less plate breakage and resists bowing to provide a smooth, flat installation. Exclusive timesaving screw-catch feature holds mounting screws captive and simplifies installation. High-gloss finish is soil-resistant. Nylon wallplates have a...

When wires become entangled they are safety hazards, for both the equipment and the owner. Calterm offers a variety of products for protections and neatness. As the needs of professional electricians change in managing wire and cable, Calterm continues to deliver innovative solutions. Flex...

Thermoplastic PVC jacket, not for hard usage in accordance with NEC. Used for lamps, small appliances and radios. Soft annealed stranded copper per ASTM B3-90 conductor. 300 V maximum. PVC insulation and UL62, UL1581 listed. Spool. 250 ft

Southwire® SIMpull® THHN® copper conductors are primarily used in conduit and cable trays for services, feeders and branch circuits in commercial or industrial applications as specified in the National Electrical Code. Voltage for all applications is 600 V. SIMpull® THHN® copper conductors are designed...

Eaton Circuit Breaker, BR, GFCI, 120/240 VAC, 15 A, Number of Poles: 1, Interrupt Rating: 10 kA, Trip Sensitivity: 15 A, Wire Size: 14 to 8 AWG, Plug Mounting, Dimensions: 4 in L x 3-1/2 in W x 1 in H Trip to center...

Constructed with heat shrink insulation adhesive lined to waterproof and environmentally seal electrical connections when crimped and heated. Insulates and protects connections from wire pullout, moisture intrusion and abrasion Heat-activated adhesive melts and flows to create a waterproof seal Resists salt water, oil, gasoline...

-resistant to rust, cracks and separation. Constructed with two different PVC materials. 600 V stranded copper THHN/THWN conductors and UL listed LFNC-B fittings. 12 in wire leads are left exposed at each end. Green insulated copper grounding conductor. Intended for 208/240/480 V. UL/CSA, complies...

Vinyl insulated copper. Rated at 600 V maximum. Temperature rating of 167 deg F. UL Listed.

Molded from non-flammable nylon. Flush-fitting, warp-resistant design. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Plate size: 4.50 x 2.75 in. Rugged construction reduces installation cost due to less plate breakage and resists bowing...

Screwless mid-size toggle wall plate, virtually unbreakable, clips easily into place with gentle pressure. Features clean appearance with no visible mounting hardware. Works with standard toggle switches. Molded from non-flammable Polycarbonate, with high structural rigidity, long-term form retention and superior impact and abrasion resistance....

Eaton Circuit Breaker, Type BR, 120/240 V, 20 A, Number of Phases: 1, Number of Poles: 1, Interrupt Rating: 10 kA, Actuator Type: Magnetic, Thermal, Trip Type: Instantaneous, Long Time, Wire Size: 14 to 8 AWG, Pigtail Mounting, Dimensions: 6 in L x 3-1/2...

Cutler-Hammer Circuit Breaker, Type BR, 120 VAC, 20 A, 1 ph, 1 Pole, 10,000 A Interrupt, Instantaneous, Long Time Trip, 14 to 4 AWG Wire, Plug Mounting, Dimensions: 6 in L x 3-1/2 in W x 1-1/8 in H, Suitable for: Type BR Load...

Die cast zinc round 4 in cover and lamp holder combination. Powder coat finish, scratch-resistant. For wet locations. Includes installation hardware, gasket and multi-lingual instructions. Uses 75 to 150 W maximum, Par-38 lamps, not included. UL listed 1598 C/UL. Rugged die-cast construction State-of-the-art powder...

Gardner Bender Large Cable Holder, 2-3/4 in L, 3-3/4 in W, 5-3/4 in H T carrying handle Large hang hole Easy release trigger Large teeth design Stainless steel hinge Cable tie looping hole

For outdoor horizontal use. Powder-coated finish. Scratch-resistant. Self-closing lid assures protection when receptacle is not in use. Includes installation hardware, gasket and Multi-lingual instructions. UL 514-A listed, File E 195978 C/UL CSA C22.2 No. 18 NEMA 3R rated. Rugged metallic construction State of-the-art powder-coated...

Molded from non-flammable nylon. Flush-fitting, warp-resistant design. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Plate size: 4.50 x 2.75 in. Rugged construction reduces installation cost due to less plate breakage and resists bowing...

Eaton Circuit Breaker, Type BR, 120/240 V, 15 A, Number of Phases: 1, Number of Poles: 1, Interrupt Rating: 10 kA, Actuator Type: Magnetic, Thermal, Trip Type: Instantaneous, Long Time, Wire Size: 14 to 8 AWG, Pigtail Mounting, Dimensions: 6 in L x 3-1/2...

Annealed (soft) copper conductor cable, with a ground wire, primarily used in residential wiring as branch circuits for outlets, switches and other loads. May be used for both exposed and concealed work in normally dry locations at temperatures not to exceed 90 deg C...

High impact-resistant nylon face and body. One-piece wraparound mounting strap for added strength and durability. Color coded body to identify amperage. Rugged glass-filled nylon body Clearly marked rating, NEMA configuration and approval listings on receptacle face One-piece brass contacts offer excellent performance and minimal...

CTL Quadplex breaker with rejection tab, 2-pole outer independent trip and 2-pole center independent trip. Requires two 1 in spaces, Wire size range #14-4, 120/240 VAC.9 lb weight, 3 in x 2 in x 3 in. UL listed, Meets UL 489. Listing for HACR...