Single phase, 2-pole, 3-wire, 2 blades and fuseholders, factory installed solid neutral, 120/240 VAC, with metallic enclosure. Bolt on hubs. Rated 1-1/2 hp. For residential or commercial applications. Typical loads include lighting, air conditioning, appliances and branch circuit disconnects. 7-1/4 in x 9.63 in...

Fit many types of service entrance devices and load center covers. Use them to replace lost or damaged screws.

Zinc die-cast. Use to join EMT conduit to Non-metallic sheathed cable. #14/2, #12/3 or 2 #14/2. Indoor use only. UL approved.

King Innovation AlumiConn 3-Port Wire Connector, 300 V, Wire Size: 12 to 10, 18 to 10 AWG, Contact Material: Silicone, Housing Material: Metal/Plastic, Purple, Screw Mounting, Temperature Rating: 105 deg C, 0.65 in L, 1.22 in W, 0.77 in H Approved by CPSC and...

Primarily used in residential wiring as branch circuits for outlets, switches and other loads. May be used for both exposed and concealed work in normally dry locations at temperatures not to exceed 90 deg C. SIMpull jacket designed for easier pulling Color-coded jacket

Primarily used in residential wiring as branch circuits for outlets, switches and other loads. May be used for both exposed and concealed work in normally dry locations at temperatures not to exceed 90 deg C. SIMpull jacket designed for easier pulling Color-coded jacket

Annealed (soft) copper conductor cable, with a ground wire, primarily used in residential wiring as branch circuits for outlets, switches and other loads. May be used for both exposed and concealed work in normally dry locations at temperatures not to exceed 90 deg C...

Thermoset fiberglass with ears, wing brackets and speed clamps. Lightweight, non-corrosive, non-conductive, no ground required. Will not melt or distort in high heat. Shatter-resistant in cold temperatures. 2-3/4 in x 4-1/8 in x 3-1/4 in. 2 hrs wall fire rating. UL listed. Two-gang electrical...

Offers same chemical resistance as carbon non-metallic conduit for a complete, corrosion-resistant system. UV-resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts and 2 washers. Gray clamps for standard conduit. Non-metallic...

Wire size range #14 to 4. Type CL replacement breakers, classified as direct replacements by Underwriters Laboratories for Square D Homeline, General Electric, Crouse-Hinds, Thomas and Betts, Murray and ITE/Siemens load centers 120/240 VAC, 10,000 AIC. 1 per pole.

Liquid tape is a rubber coating that takes the place of electrical tape by providing electrical insulation to hard-to-reach places. Provides excellent protection from acid, alkaline and abrasion Seals out moisture and salt Strongest dielectric protection on the market Protects electrical connections on wires,...

CTL Quadplex breaker with rejection tab, 2-pole outer independent trip and 2-pole center independent trip. Requires two 1 in spaces, Wire size range #14-4, 120/240 VAC.9 lb weight, 3 in x 2 in x 3 in. UL listed, Meets UL 489. Listing for HACR...

For snap-in splicing of low voltage AWG wire without prior stripping. 75 deg C temperature rating. Clamshell. Secure connections without stripping wire

Center plate. Thermoplastic construction for durability and flexibility. Easy to snap together and lock. Mid-size design to fit over most existing wall openings. Screw-catch feature holds already attached mounting screws captive for easy installation. Screws are slotted steel, baked enamel and painted. Meets current...

Secures wire and cable in industrial, auto or marine and where vibrations may occur. Built-in screw hole for multiple mounting options. Corrosion-resistant plated steel clamp Secure with 1/4 in screw

GB Insulated Clamp, 3/8 in Diameter Maximum Bundle, Rubber/Steel, Black

Die cast zinc with porcelain socket. For wet locations. Use 75 to 150 W maximum, PAR-38 lamps. Includes gaskets and locknuts. UL listed. Rugged die-cast construction State-of-the-art powder coat finish provides maximum weatherability and scratch resistance Locking swivel knuckle allows positive lamp positioning and...

An air conditioning disconnect (ACD) is a disconnect located between the load center and the air conditioner. Eaton's ACD provides an installer or repair personnel with a visible disconnecting means when performing maintenance.

Use and reuse these releasable cable ties to temporarily fasten wires, cables and hoses. Cable management ensures neat, clean and easy-to manage installations of various sizes of wire, cable or even conduit and hoses. Bundling and identifying wires also reduces the chance for tripping...

Standard duplex receptacles feature longer, wider straps providing 40% more contact area to the wallboard. Virtually eliminates floating installations. Patented built-in wire stripper for #14 and #12 wire to speed installation. Patented built-in wire looper for pre-looping. Tri-combo screws accept slotted, Phillips and Robertson-head...

Heavy-duty zip ties are hard-wearing and designed for rugged industrial, automotive and farm applications demanding high levels of tensile strength and large bundle diameters. Permanently secured until you cut them off GB ties lock tight without stretching or sliding. Made from durable 100% nylon...

Screwless mid-size toggle wall plate, virtually unbreakable, clips easily into place with gentle pressure. Features clean appearance with no visible mounting hardware. Works with standard toggle switches. Molded from non-flammable Polycarbonate, with high structural rigidity, long-term form retention and superior impact and abrasion resistance....

Fast-acting for maximum protection. Glass tube construction. Nickel or silver-plated brass. 5 mm x 20 mm. UL/CSA 248-14 rated. Fast-acting, low breaking capacity

WireGard™ twist-on wire connectors are designed for general-purpose applications requiring the connection of 2 or more copper wires. WireGard™ connectors feature a straight type polypropylene shell with side knurling for an easy grip. The inner spring is zinc-plated to resist corrosion and has a...

Provides smooth, positive motion for dimming and On/Off control. Non-preset incandescent. UL listed, NOM certified. 600 W maximum. Carded.

Dependable and easy-to-use, Gardner Bender terminals (and wiring accessories) offer the high-quality and application flexibility that professionals demand. Available in a variety of packaging options, look to Gardner Bender for secure wire connection options. Gardner Bender 0.156 in tab red male/female pair crimp terminals...

Outdoor use, rugged metallic construction. Powder coat finish. Scratch resistant. Includes installation hardware, gasket and multi-lingual instructions. cULuS/UL listed. NEMA 3R rated. Rugged metallic construction State-of-the-art powder coat finish provides maximum weatherability and scratch resistance

Steel, indoor or out. Use to join threaded Rigid or IMC conduit together. UL listed. Use to join threaded rigid or IMC conduit together

The raintight NEMA 3R power inlet box is designed for the use with the Pro/Tran transfer switches and Reliance® panel or link manual transfer panels and generator-ready load centers. The power inlet box may be installed indoors or outdoors in an open area where...

Mid size sectional wallplates - polycarbonate decorator wallplates are virtually unbreakable, with high structural rigidity, long term form retention and great impact and abrasion resistance. Rugged construction reduces installation cost due to less plate breakage and resists bowing to provide a smooth, flat installation....

Eaton's mid-size screw less wallplates help provide a sleek, smooth and seamless look to your wiring devices! Rugged construction reduces installation cost due to less plate breakage and resists bowing to provide a smooth, flat installation. Exclusive timesaving screw-catch feature holds mounting screws captive...

Connecticut Electric RV/EV power outlet. Features heavy-duty steel construction with powder coat finish in a 3R rainproof enclosure. Outlet TT-30 travel trailer receptacle.

Eaton's mid-size screw less wallplates help provide a sleek, smooth and seamless look to your wiring devices! Rugged construction reduces installation cost due to less plate breakage and resists bowing to provide a smooth, flat installation. Exclusive timesaving screw-catch feature holds mounting screws captive...

Eaton's mid-size screw less wallplates help provide a sleek, smooth and seamless look to your wiring devices! Rugged construction reduces installation cost due to less plate breakage and resists bowing to provide a smooth, flat installation. Exclusive timesaving screw-catch feature holds mounting screws captive...

Eaton's mid-size screw less wallplates help provide a sleek, smooth and seamless look to your wiring devices! Rugged construction reduces installation cost due to less plate breakage and resists bowing to provide a smooth, flat installation. Exclusive timesaving screw-catch feature holds mounting screws captive...

Set a running time for bathroom exhaust fans or lighting. Replaces a standard light switchplate and fits a standard decorator switchplate. Compatible with compact fluorescent bulbs. 120 vac 60 Hz 15 A, 1875 W resistive, 8 A, 120 V, 1000 W tungsten 1/4 hp....

The industry leader in circuit protection is easily recognized by the industry's only trip indicator. The red Visi-Trip™ Indicator makes it easy to spot a tripped circuit breaker. Compact 3/4 in wide format for one-pole circuit breakers helps minimize panel space and footprint. The...

For use up to 600 V. PVC film coated with a Non-corrosive rubber-based adhesive. -resistant to water, oils, acids, alkalis and other corrosive chemicals. Lead-free. Temperature range from 32 to 176 deg F. Used to repair frayed wiring, splice wiring, protect wire nut connections,...

Steel, indoor or outdoor. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. Tray boxed.

Constructed of die-cast aluminum. For use in branch circuit wiring in wet, damp or dry locations. May be used as a weatherproof junction box or as a housing for receptacles, switches and GFCIs. Reinforced connector outlets. Powder coat finish. Eight box mounting options with...

For oversized wiring devices such as fan speed controls, dimmer switches and GFCIs. 1-3/4 in D.

Use to connect S, SO, ST, SJ, SJO and SJT cord to a steel outlet box or other metal enclosure. UL approved and CSA certified.

Replaces a standard switch and offers dimming capabilities. Use with dimmable LED/CFL, incandescent, halogen, magnetic low-voltage and electronic low-voltage. 300 W dimmable LED/CFL, 600 W incandescent/halogen/magnetic low-voltage/electronic low-voltage. Preset feature allows user to return to previous light level when turning lights ON. Integrated full-slide...

Eaton Slide Dimmer, 277 V, Frequency Rating: 60 Hz, Number of Poles: 1, Number of Phases: 1, Number of Gangs: 2, Flush Mounting, Terminal Type: Back and Side Wire, Temperature Rating: -4 to 158 deg F, Polycarbonate, Light Almond, Dimensions: 2.03 in L x...

Securely fasten schedule 40 PVC, copper tubing and other electrical and plumbing cables and pipes with these heavy-duty polyethylene straps. Unlike metal straps these plastic straps won't rust and they offer stability against UV rays and extreme cold while withstanding deterioration and breakage. Easily...

Constructed of die-cast aluminum. For use in branch circuit wiring in wet, damp or dry locations. May be used as a weatherproof junction box or as a housing for receptacles, switches and GFCIs. Reinforced connector outlets. Powder coat finish. Eight box mounting options with...

For use whenever weatherproof protection is required for an "on/off" type switch. Powder coat finish. Supplied with a switch unassembled to the cover - no need to purchase separate components. Includes installation hardware and multi-lingual instructions. Size 4-1/2 in L x 2-3/4 in W....

With lugs. Die-cast aluminum. For use in branch circuit wiring in wet, damp or dry locations. May be used as a weatherproof junction box or as housing for receptacles, switches and GFCI's. Eight box mounting options with detachable lugs provided. Powder coat finish. 16.5...

Single locking receptacle. Glass reinforced nylon body and face. One piece brass contacts. Back and side wire terminal clamps. 15 amp - 125 volt. CSA certified.

Gardner Bender Cable Tie, 36 in L, 0.35 in W, 6/6 Nylon, Natural, 175 lb Tensile Strength