Holds connecting parts in place.

Holds connecting parts in place. Contains two each 1/4-27 knurled locknuts, 1/8 IP knurled locknuts, 1/4 IP knurled locknuts, 8/32 battery nuts and four 1/8 IP hex nuts.

Holds connecting parts in place.

Holds connecting parts in place.

For repairing or making lighting fixtures and lamps.

For repairing or making lighting fixtures and lamps.

For repairing or making lighting fixtures and lamps.

For repairing or making lighting fixtures and lamps.

For repairing or making lighting fixtures and lamps.

On/off switch. CSA Listed.

Crossbar for mounting light fixtures.

Crossbar for mounting light fixtures.

Crossbar for mounting light fixtures.

Crossbar for mounting light fixtures.

Crossbar for mounting light fixtures.

Crossbar for mounting light fixtures.

Crossbar for mounting light fixtures.

Crossbar for mounting light fixtures.

Used to cover the outlet box and hang ceiling fixture. 5 in.

Used to cover the outlet box and hang ceiling fixture. 5 in.

Used to cover the outlet box and hang ceiling fixture. 5 in.

Used to cover the outlet box and hang ceiling fixture. 5 in.

Used to cover the outlet box and hang ceiling fixture. 5 in.

Used to cover the outlet box and hang ceiling fixture. 5 in.

Used to cover the outlet box and hang ceiling fixture. 5 in.

Decorative piece used to cover the outlet box after removal of an existing fixture. Mounting holes 3-1/2 in apart

Decorative piece used to cover the outlet box after removal of an existing fixture. Mounting holes 3-1/2 in apart

Decorative piece used to cover the outlet box after removal of an existing fixture. Mounting holes 3-1/2 in apart

Provides overhead lighting and supports glass shade. Includes one glass shade holder with 18AWG pre-wired 6 in insulated leads, ground wire and insulation - brass finish, one 4 in offset crossbar, two 8-32 x 1/2 in mounting screws, two 8-32 x 2 in mounting...

Provides overhead lighting and supports glass shade. Includes one glass shade holder with 18 AWG pre-wired 6 in insulated leads, ground wire and insulation brass finish, one 4 in offset crossbar, two 8-32 x 1/2 in mounting screws, two 8-32 x 2 in mounting...

Provides overhead lighting and supports reflector glass. Includes the canopy, two-bulb cluster socket with 18 AWG pre-wired 8 in insulated leads, rated 250 V for use with 2 light bulbs, 50 W maximum, 4 in offset crossbar, two 8-32 x 1/2 in mounting screws,...

Covers base socket. For use with a maximum 25 W bulb.

Covers base socket. For use with a maximum 25 W bulb.

Socket for candelabra base bulbs, with 1/8 IP hickey. Rated 75 W, 125 V. Use only with #16 or #18 AWG stranded copper wire.

Socket for candelabra base bulbs, with 1/8 IP hickey. Rated 75 W, 125 V. Use only with #16 or #18 AWG stranded copper wire.

Jandorf Lock-Up Cap, Specifications: 1/8 in IP Thread, Plastic, White

Jandorf Lock-Up Cap, Specifications: 1/8 in IP Thread, Plastic, Brass

Jandorf Lock-Up Cap, Specifications: 1/8 in IP Thread, Brass

Jandorf Lock-Up Cap, Specifications: 1/8 in IP Thread, Nickel

Secures center mount glass shade to ceiling fixture. Kit contains (1) 1-1/8 in check ring, (1) lock-up cap 1/8 IP, 1 - 1/8 IP x 1 in OD rubber washer white.

Secures center mount glass shade to ceiling fixture. Kit contains (1) 1-1/8 in check ring, (1) lock-up cap 1/8 IP, 1 - 1/8 IP x 1 in OD rubber washer white.

Decorative loop that secures 1-1/16 in center hole canopy. 1/4 IP. Decorative loop that secures 1-1/16 in center hole canopy

Used for mounting drop fixtures.

Used for mounting drop fixtures.

Used for mounting drop fixtures.

Used for mounting drop fixtures.

Used for mounting drop fixtures.

Decorative piece used for hanging fixtures. 1/8 IP brass finish.

Decorative piece used for hanging fixtures. 1/8 IP brass finish.

Secures canopy or blank up to crossbar. 8/32 thread, 3/8 in Dia solid brass.