-
Vendor: OATEY
Oatey 30710 Acid Brush, 3 in L x 1/2 in W Brush, 6 in OAL
Oatey acid brushes are designed for applying liquid or paste fluxes to piping prior to soldering. Made from 100% pure stiff horse hair tied with steel staple- $2.26
- $2.26
- Unit price
- per
-
Vendor: OATEY
Oatey Safe-Flo 29025 Wire Solder, 1 lb, Solid, Gray/Silver, 415 to 455 deg F Melting Point
Oatey® Safe-Flo® lead-free plumbing wire solder is a silver bearing wire solder designed for plumbing and potable water line applications. Meets the requirements of the Safe Drinking Water Act- $55.36
- $55.36
- Unit price
- per
-
Vendor: OATEY
Oatey 53017 Soldering Flux, 1.7 oz Carton, Paste, Amber
Oatey #5 lead-free paste flux cleans and fluxes most commonly soldered metals including copper, brass, zinc, galvanized iron, lead and tin or copper-coated metals. fluxing is a critical step in the soldering process. #5 paste flux provides great wetting properties for better solder flow...- $5.07
- $5.07
- Unit price
- per
-
Vendor: ERICO
nVent ERICO 815860UPC Grounding Rod, 5/8 in Dia Nominal, 6 ft L, Steel, Galvanized
Zinc-coated exteriors are hot-dip galvanized for solid protection against corrosion in accordance with ASTM specification A153-78. Surfaces are rigidly inspected to eliminate seams, slivers and other defects. Meet EEI-NEMA TDJ-30 and are REA listed. 15 year service life in most soils. Galvanized plated steel....- $14.27
- $14.27
- Unit price
- per
-
Vendor: STANLEY
STANLEY PAA66-5B Pop Rivet, Reusable, 3/8 in Grip, 3/16, Aluminum
Medium strength aluminum can be used with aluminum and where rust is a potential problem. Reusable, full visibility packaging simplifies product selection and storage. Medium strength aluminum can be used with aluminum and where rust is a potential problem Full visibility packaging simplifies product...- $6.42
- $6.42
- Unit price
- per
-
Vendor: ARROW
Arrow JT21 Series 276 Staple, 7/16 in W Crown, 3/8 in L Leg
JT21 staples are the T50's little brother. Although often referred to as light duty, there's really nothing "Light" about them. Built with the same quality and precision as the T50, these staples utilize a thinner wire in a smaller staple format to deliver great...- $4.76
- $4.76
- Unit price
- per
-
Vendor: OATEY
Oatey 22018 Plumbing Wire Solder, 1 lb, Solid, Silver, 450 to 464 deg F Melting Point
Oatey® 95/5 lead-free plumbing wire solder is a tin-antimony wire solder designed for use in plumbing applications where frequent and extreme temperature changes and vibrations occur. Meets the requirements of the Safe Drinking Water Act Complies with CA and VT lead content regulations- $65.07
- $65.07
- Unit price
- per
-
Vendor: OATEY
Oatey Safe-Flo 29024 Wire Solder, 1/2 lb, Solid, Silver, 415 to 455 deg F Melting Point
Oatey® Safe-Flo® lead-free plumbing wire solder is a silver bearing wire solder designed for plumbing and potable water line applications. Meets the requirements of the Safe Drinking Water Act- $36.05
- $36.05
- Unit price
- per
-
Vendor: OATEY
Oatey Safe-Flo 53061 Wire Solder, 1 oz Carded, Solid, Gray/Silver, 415 to 455 deg F Melting Point
Oatey® Safe-Flo® lead-free plumbing wire solder is a silver bearing wire solder designed for plumbing and potable water line applications. Meets the requirements of the Safe Drinking Water Act- $11.17
- $11.17
- Unit price
- per
-
Vendor: OATEY
Oatey 50683 Wire Solder Kit, 0.25 lb, Solid
Oatey Wire Solder Kit, Net Content: 0.25 lb, Solid, Compositions: 60 - 100% Tin, 1 - 5% Copper, 1 - 5% Bismuth, 1 - 5% Silver, Specific Gravity: 9 - 11, Applicable Materials: Bismuth, Copper, Tin- $31.50
- $31.50
- Unit price
- per
-
Vendor: OATEY
Oatey 30373 Tinning Flux, 1.7 oz Carded, Paste, Yellow
Oatey #95 lead-free tinning flux cleans, tins and fluxes most commonly soldered metals including copper, brass, zinc, galvanized iron, lead and tin or copper-coated metals. #95 contains lead-free solder powder which helps draw in the solder wire. Fluxing is a critical step in the...- $5.08
- $5.08
- Unit price
- per
-
Vendor: OATEY
Oatey Safe-Flo 53062 Wire Solder, 1/4 lb Carded, Solid, Gray/Silver, 415 to 455 deg F Melting Point
Oatey® Safe-Flo® lead-free plumbing wire solder is a silver bearing wire solder designed for plumbing and potable water line applications. Meets the requirements of the Safe Drinking Water Act- $30.33
- $30.33
- Unit price
- per
-
Vendor: BOSTITCH
Bostitch PowerCrown Series H30-8 Hammer Tacker, 84 Magazine, Steel Staple
This PowerCrown™ hammer tacker features a die-cast frame and hardened steel components to offer durability and with tool-free jam removal and a quick load magazine is convenient and easy-to-use. Die-cast frame and through hardened steel components for extreme durability Quick-load magazine Tool-free jam clearing...- $43.28
- $43.28
- Unit price
- per
-
Vendor: ERICO
nVent ERICO CP58 Ground Clamp, Clamping Range: 1/2 to 5/8 in, #10 to 2 AWG Wire, Silicone Bronze
Connects grounding wire to the grounding rod. UL and CSA listed for 1/2 in and 5/8 in ground rods and number 4 rebar and accept a conductor range from number 10 solid to number 2 stranded. For use with copper-bonded ground rods- $3.76
- $3.76
- Unit price
- per
-
Vendor: ERICO
nVent ERICO 611380UPC Grounding Rod, 1/2 in Dia Nominal, 8 ft L, Steel
Copper bonded, resists corrosion better than galvanized rods, allowing for a 30 year service life in most soils. Uniform plating thickness, average tensile strength of 80000 psi and straightness tolerance of 0.010 in per linear foot. Exceeds the requirements of ANSI/UL 467-1984, CSA and...- $20.39
- $20.39
- Unit price
- per
-
Vendor: ARROW
Arrow T25 Cable Staple Gun, Crown Staple, 3/8, 7/16, 9/16 in W Crown, Steel Staple
A favorite tool of professional installers, the T25 is Arrow's best-selling wiring staple gun. It features an all chromed steel housing, jam-resistant rear load mechanism, powerful coil spring, cushioned grip, grooved wire guide to protect wires against damage and curved blade for consistent stapling...- $32.95
- $32.95
- Unit price
- per
-
Vendor: ERICO
nVent ERICO 815880UPC Grounding Rod, 5/8 in Dia Nominal, 8 ft L, Steel, Galvanized
Zinc-coated exteriors are hot-dip galvanized for solid protection against corrosion in accordance with ASTM specification A153-78. Surfaces are rigidly inspected to eliminate seams, slivers and other defects. Meet EEI-NEMA TDJ-30 and are REA listed. 15 year service life in most soils. Galvanized plated steel....- $16.97
- $16.97
- Unit price
- per
-
Vendor: ARROW
Arrow JT27 Staple Gun, JT21 Staple, 3/8 in W Crown, 1/4 to 3/8 in L Leg, Steel Staple
The JT27 is a great choice for occasional DIY users looking for a dependable yet economical fine wire stapler. The JT27's convenient bottom load magazine with pinch release makes reloading and clearing jams easy and hassle-free. The handle lock secures the handle against the...- $16.29
- $16.29
- Unit price
- per
-
Vendor: STANLEY
STANLEY PAA54-5B Pop Rivet, Reusable, 1/4 in Grip, 5/32, 1-3/4 in L, Aluminum
Medium strength aluminum can be used with aluminum and where rust is a potential problem. Reusable, full visibility packaging simplifies product selection and storage. Medium strength aluminum can be used with aluminum and where rust is a potential problem Full visibility packaging simplifies product...- $9.00
- $9.00
- Unit price
- per
-
Vendor: OATEY
Oatey 30712 Acid Brush, 3 in L x 1/2 in W Brush, Tin Handle, 6 in OAL
Oatey acid brushes are designed for applying liquid or paste fluxes to piping prior to soldering. Made from 100% pure stiff horse hair tied with steel staple- $0.62
- $0.62
- Unit price
- per
-
Vendor: IRWIN
CLAMP/SPREADER BAR METAL 12IN
Converts from a bar clamp to a spreader easily, no tools required; 7-1/2" minimum spreading capacity with 3-1/4" throat depth. New and improved one-handed clamp delivers 300 lbs of sustained clamping force, an i-beam bar, and locking swivel jaw. Removable Pads.- $29.78
- $29.78
- Unit price
- per
-
Vendor: WELLER
Weller WLIRK3012A Soldering Iron Kit with LED Halo Ring, 120 V, 30 W, Conical Tip, Ergonomic, Pencil Grip Handle
Solder skillfully and confidently with Weller's 30 W soldering iron with LED Halo Ring™. With its 360 deg illumination, ergonomic molded pencil grip handle, easy-to-change tips and integrated safety rest, it's the ideal high-quality and versatile soldering iron for all your soldering needs. High-visibility...- $27.21
- $27.21
- Unit price
- per
-
Vendor: OATEY
Oatey 21305 Bar Solder, 1-1/4 lb, Solid, Silver, 361 to 421 deg F Melting Point
Oatey® bar solder is a tin-lead bar solder designed for use with copper drain piping, tin plating, seaming joints and sheet metal. Contains lead not for use on drinking water lines Cannot be sold or used in Indiana or Pennsylvania- $49.82
- $49.82
- Unit price
- per
-
Vendor: IRWIN
Irwin QUICK-GRIP 1964720 Bar Clamp/Spreader, 300 lb, 24 in Max Opening Size, 3-3/16 in D Throat, Steel Body
Irwin QUICK-GRIP Bar Clamp/Spreader, 300 lb Weight, Maximum Opening Size: 24 in, Throat Depth: 3-3/16 in, Body Material: Steel, Lock Type: Quick-Release Trigger The IRWIN® QUICK-GRIP® medium duty one-handed bar clamp evenly distributes up to 300 lb of sustained clamping force I-beam bar to...- $35.68
- $35.68
- Unit price
- per
-
Vendor: STINGER
Stinger 136400 Cap Hammer, 168 Magazine, 3/8 in W Crown
For residential roofing and sidewall applications. The first hammer tacker to deliver a cap and staple. Easy-to-use - just pull the trigger and drive it in. Gets the job done for a fraction of the cost of a pneumatic tool. Promotes best practice installation....- $59.39
- $59.39
- Unit price
- per
-
Vendor: STANLEY
STANLEY PHT150C Hammer Tacker, 168 Magazine, 27/64 in W Crown, 1/4 to 3/8 in L Leg, Steel Staple, Yellow
The Sharpshooter® heavy-duty hammer tacker is ideal for anyone who wants to facilitate the installation of carpeting, roofing or insulation. Full-rubber grip absorbs shock and helps protects hand Loads two full sticks of Stanley® TRA700 or Arrow® T-50® heavy-duty staples from 1/4 to 3/8...- $24.05
- $24.05
- Unit price
- per
-
Vendor: GB
Gardner Bender GGP-1502 Grounding Pigtail, 12 AWG Wire, Copper, Green, 2/BAG
GB offers a convenient grounding accessories line of products suitable for most job requirements. This grounding pig tail is made from #12 AWG stranded wire. One end is terminated with a bare fork terminal. The other end is a captured screw. One end is...- $3.44
- $3.44
- Unit price
- per
-
Vendor: GB
GB GGS-1512R Ground Screw, #10-32 Thread, Hex Drive
Green round washer head screw for switch and outlet boxes.- $2.92
- $2.92
- Unit price
- per
-
Vendor: HALEX
Halex 16010B Ground Clamp, 10 to 2 AWG Wire, Zinc, Zinc
Indoor or outdoor applications. Use to secure the grounding wire to a 1/2 in through 1 in pipe. UL listed. Wire size fits #10 to 2 AWG.- $61.66
- $61.66
- Unit price
- per
-
Vendor: ARROW
Arrow BN1816BCS Brad Nail, 1 in L, Steel, Plain, Smooth Shank
Arrow brad nails are small 18 ga nails up to 2 in long. Because they are thinner in cross section, they are less likely to split decorative molding as they leave a very small hole.- $10.80
- $10.80
- Unit price
- per
-
Vendor: ARROW
Arrow BN1812BCS Brad Nail, 3/4 in L, Steel, Plain, Smooth Shank
Arrow brad nails are small 18 ga nails up to 2 in long. Because they are thinner in cross section, they are less likely to split decorative molding as they leave a very small hole.- $9.90
- $9.90
- Unit price
- per
-
Vendor: RAMSET
Ramset 1510SD Washered Pin, 0.145 in Dia Shank, Steel, Zinc
With 7/8 in washer to prevent overdrive and to increase holding value when fastening wood or thin metal to concrete or structural steel. Fits all Ramset, hilti, Remington and most powder actuated tools that use 22 cal single shots, 27 cal 10 shot strips...- $20.64
- $20.64
- Unit price
- per
-
Vendor: ARROW
Arrow RSST1/8 Pop Rivet, Short, 1/8 in Grip, 1/8 in L, Stainless Steel
Use steel rivets for very heavy-duty jobs and when riveting steel to steel. Use aluminum rivets for lighter weight jobs and materials such as aluminum, fabrics, plastics, leather and more. Use washers when joining soft materials or when existing hole is oversize. High corrosion-resistant...- $5.33
- $5.33
- Unit price
- per
-
Vendor: STANLEY
STANLEY PSS44-1B Pop Rivet, High-Strength, Reusable, 1/4 in Grip, 1/8, Galvanized Steel
Used for joining steel to steel. Reusable, full-visibility packaging simplifies product selection and storage. High strength, all steel construction. Full visibility packaging simplifies product selection and storage- $5.47
- $5.47
- Unit price
- per
-
Vendor: STANLEY
STANLEY PAA48-1B Pop Rivet, Reusable, 1/2 in Grip, 1/8, 1-3/4 in L, Aluminum
Medium strength aluminum can be used with aluminum and where rust is a potential problem. Reusable, full visibility packaging simplifies product selection and storage. Medium strength aluminum can be used with aluminum and where rust is a potential problem Full visibility packaging simplifies product...- $5.47
- $5.47
- Unit price
- per
-
Vendor: ARROW
Arrow T50 Series 505SS1 Staple, 3/8 in W Crown, 5/16 in L Leg
T50 staples are the world's top-selling heavy-duty staple platform. Made to deliver exceptional holding power, these staples are used for all heavy-duty stapling applications - from installing insulation, housewraps and roofing underlayments to upholstering fine furniture and window treatments. A true workhorse of a...- $14.28
- $14.28
- Unit price
- per
-
Vendor: VULCAN
Vulcan JL25013 Bench Vise, 6 in Jaw Opening, 1/2 in W Jaw, 3 in D Throat, Cast Iron Steel, Serrated Jaw
The Vulcan bench vise is typically used to hold a wood or metal work piece. It has 3 lock down bolts, serrated jaw with a jaw opening size of 6 in and a swivel base type. Made of cast iron steel. 3 Bolt down...- $190.15
- $190.15
- Unit price
- per
-
Vendor: VULCAN
Vulcan JL25012 Bench Vise, 5 in Jaw Opening, 3/8 in W Jaw, 2.5 in D Throat, Cast Iron Steel, Serrated Jaw
The Vulcan bench vise is typically used to hold a wood or metal work piece. It has 3 lock down bolts, serrated jaw with a jaw opening size of 5 in and a swivel base type. Made of cast iron steel. 3 Bolt down...- $142.78
- $142.78
- Unit price
- per
-
Vendor: VULCAN
Vulcan JL25011 Bench Vise, 4 in Jaw Opening, 3/8 in W Jaw, 2.25 in D Throat, Cast Iron Steel, Serrated Jaw
The Vulcan bench vise is typically used to hold a wood or metal work piece. It has 3 lock down bolts, serrated jaw with a jaw opening size of 4 in and a swivel base type. Made of cast iron steel. 3 Bolt down...- $98.73
- $98.73
- Unit price
- per
-
Vendor: ACCO
Rapid PRO R19E Series 20726010 Hammer Tacker, Steel Staple
Lightweight, easily handled hammer tacker perfect for regular, demanding use. Ideal for intensive jobs such as fastening of labels, posters, textiles, plastic wrap or insulation material. Quick, easy bottom loading and a non-slip ergonomic handle deliver higher operational efficiency while all steel heavy-duty, Swedish...- $31.97
- $31.97
- Unit price
- per
-
Vendor: ACCO
Rapid 23520300/A11516 Staple, 5/16 in L Leg
Rapid Staple, Leg Length: 5/16 in, Suitable for: R11, R211, R54, R34, ALU740 Staple Guns- $10.68
- $10.68
- Unit price
- per
-
Vendor: ACCO
Rapid PRO R11E Series 20725915 Hammer Tacker, Steel Staple
The R11 is a powerful, precision hammer tacker designed for demanding professional applications. Its characteristics make it ideal for high-frequency jobs such as fastening roofing and insulation material, plastic wrap and damp proof coursing. Single-handed, ergonomic, non-slip grip offers easier operation and reduces fatigue...- $51.55
- $51.55
- Unit price
- per
-
Vendor: VULCAN
Vulcan JLO-067 Bench Vise, 3-1/2 in Jaw Opening, 1/4 in W Jaw, 2 in D Throat, Cast Iron Steel, Serrated Jaw
The Vulcan bench vise is typically used to hold a wood or metal work piece. It has 4 lock down bolts, serrated jaw with a jaw opening size of 3-1/2 in and a swivel base type. Made of cast iron steel. 4 Bolt down...- $73.11
- $73.11
- Unit price
- per
-
Vendor: RAMSET
Ramset C3RS27 Powder Actuated Load Strip, Power Level: 3, Green Code, 10-Load, 0.27 in Dia, 1-1/2 in L
ITW Ramset powder loads and tools match tolerances to provide optimum power within recognized national velocity standards. Power level is designated by the load level number marked on each box, also by the color of the box and each powder load, as the number...- $22.50
- $22.50
- Unit price
- per
-
Vendor: RAMSET
Ramset 1516 Drive Pin, 0.145 in Dia Shank, 2-1/2 in L , Steel, Zinc
Use with Ramset, hilti, Remington and most powder actuated tools that use 22 cal single shots, 27 cal. 10 strips and 25 cal discs. For models of low velocity powder actuated tools with 300 or larger barrel diameter. Knurled shank pins for fastening to...- $19.70
- $19.70
- Unit price
- per
-
Vendor: STANLEY
STANLEY TRA205T Staple, 29/64 in W Crown, 5/16 in L Leg, Galvanized
Used for light-duty household and crafting stapling jobs. Color-coded packaging for easy product selection, sturdy plastic packaging reduces staple breakage. Fits TR45 and arrow JT-21 staplers. Color coded packaging makes size and product selection easy Sturdy plastic packaging helps reduce stick breakage- $2.23
- $2.23
- Unit price
- per
-
Vendor: COMSTAR
ComStar Copper Lock Series 10-801 No Heat Solder, 10 mL Tube, Liquid, -60 to 300 deg F Melting Point
Fast, easy, permanent, fit in the copper pipe and within seconds a permanent leakproof seal will occur. Pressure may be applied after two minutes. Can withstand pressures up to 500 psi. Withstands temperatures from -60 to 300 deg F. Meets US Military specifications. Good...- $14.26
- $14.26
- Unit price
- per
-
Vendor: STANLEY
STANLEY PAA44-1B Pop Rivet, Reusable, 1-5/8 in L, Aluminum
Medium strength aluminum can be used with aluminum and where rust is a potential problem. Reusable, full visibility packaging simplifies product selection and storage. Medium strength aluminum can be used with aluminum and where rust is a potential problem Full visibility packaging simplifies product...- $5.47
- $5.47
- Unit price
- per
-
Vendor: ARROW
Arrow RL100K Rivet Tool Kit, 1/8, 3/16 in Rivet, Non-Slip Grip Handle, Steel
The RL100K rivet kit is the ideal starter kit for DIY consumers and the occasional rivet user. The kit comes with our all-purpose RL100S rivet tool, two interchangeable nose pieces, a nose changing wrench and 50 of our two most popular rivets, 25 each...- $20.28
- $20.28
- Unit price
- per
-
Vendor: DEWALT
DEWALT DWHTTR510 5-in-1 Multi-Tacker, 1000 Magazine, Round Crown, Flat Crown, Narrow Flat Crown Staple, 1/2 in W Crown
The 5-in-1 multi-tacker can be easily squeezed, has an AntiJam™ mechanism to help prevent misfires and is made of aluminum which is lightweight and durable. Easy-squeeze technology helps reduce actuation force Lightweight die-cast aluminum housing design for durability Also uses full range of Stanley®...- $35.59
- $35.59
- Unit price
- per
Sidebar
Recently Viewed Products
1
/
of
20
- Choosing a selection results in a full page refresh.