MFG: USP LUMBER CONNECTORS
Model No: ADTT-TZKT
Deck collapses are often caused by failure of the connection where the deck is attached to the main structure due to little or no lateral capacity. ADTT-TZ is an adjustable deck tension tie designed to effectively transfer the out of plane lateral loads of the deck to the house structure...
$45.58
MFG: USP LUMBER CONNECTORS
Model No: HUS26
Designed for medium load conditions. Extended 3 in deep seat provides enhanced truss bearing...
$3.84
MFG: USP LUMBER CONNECTORS
Model No: HUS28
Designed for medium load conditions. Extended 3 in deep seat provides enhanced truss bearing...
$5.73
MFG: USP LUMBER CONNECTORS
Model No: IHFL17112/THF1711
IHFL (18 ga) and IHF (16 ga) series face mount hangers feature speed prongs for temporary placement and seat cleats to grab the bottom flange of the supported I-joist. Diamond holes in header and joist allow for optional Max nailing for customized fastening to match allowable load needed. Install na..
$5.31
MFG: USP LUMBER CONNECTORS
Model No: IHFL20112
IHFL (18 ga) and IHF (16 ga) series face mount hangers feature speed prongs for temporary placement and seat cleats to grab the bottom flange of the supported I-joist. Diamond holes in header and joist allow for optional Max nailing for customized fastening to match allowable load needed. Install na..
$5.49
MFG: USP LUMBER CONNECTORS
Model No: IHFL23925
IHFL (18 ga) and IHF (16 ga) Series face mount hangers feature speed prongs for temporary placement and seat cleats to grab the bottom flange of the supported I-joist. Diamond holes in header and joist allow for optional max nailing for customized fastening to match allowable load needed. Install na..
$4.99
MFG: USP LUMBER CONNECTORS
Model No: IHFL25925
IHFL (18 ga) and IHF (16 ga) Series face mount hangers feature speed prongs for temporary placement and seat cleats to grab the bottom flange of the supported I-joist. Diamond holes in header and joist allow for optional max nailing for customized fastening to match allowable load needed. Install na..
$5.33
MFG: USP LUMBER CONNECTORS
Model No: IHFL23112
IHFL (18GA) and IHF (16GA) series face mount hangers feature speed prongs for temporary placement and seat cleats to grab the bottom flange of the supported I-joist. Diamond holes in header and joist allow for optional Max nailing for customized fastening to match allowable load needed. Install nail..
$5.66
MFG: USP LUMBER CONNECTORS
Model No: IHFL2514
IHFL (18GA) and IHF (16GA) series face mount hangers feature speed prongs for temporary placement and seat cleats to grab the bottom flange of the supported I-joist. Diamond holes in header and joist allow for optional Max nailing for customized fastening to match allowable load needed. Install nail..
$6.74
MFG: USP LUMBER CONNECTORS
Model No: JDS24
The JDS purlin hangers provide a convenient, flexible solution when attaching purlins together...
$4.91
MFG: USP LUMBER CONNECTORS
Model No: JDS24S
The JDS purlin hangers provide a convenient, flexible solution when attaching purlins together...
$2.51
MFG: USP LUMBER CONNECTORS
Model No: JDS26
The JDS purlin hangers provide a convenient, flexible solution when attaching purlins together...
$5.01
MFG: USP LUMBER CONNECTORS
Model No: JL210IF-TZ
Speed prongs designed to temporarily position hangers on headers for more convenient nail fastening. G-185 galvanizing finish. Meets ICC-ES ESR-1781, FL43285, Dade county, FL11-0510.01 and L.A. City RR25843 codes...
$3.80
MFG: USP LUMBER CONNECTORS
Model No: JL26IF-TZ
Speed prongs designed to temporarily position hangers on headers for more convenient nail fastening. G-185 galvanizing finish. Meets ICC-ES ESR-1781, FL43285, Dade county, FL11-0510.01 and L.A. City RR25843 codes...
$2.60
MFG: USP LUMBER CONNECTORS
Model No: JL28IF-TZ
Speed prongs designed to temporarily position hangers on headers for more convenient nail fastening. G-185 galvanizing finish. Meets ICC-ES ESR-1781, FL43285, Dade county, FL11-0510.01 and L.A. City RR25843 codes...
$3.58
MFG: USP LUMBER CONNECTORS
Model No: JUS210
The JUS hanger Series offers double shear nailing. USP's dimple allows for 30 to 45 deg nailing through the joist into the header resulting in higher loads and less nailing. Slant/double shear nailing allows for higher load values, fewer nails and faster installation...
$1.87
MFG: USP LUMBER CONNECTORS
Model No: JUS210-2
The JUS hanger Series offers double shear nailing. USP's dimple allows for 30 deg to 45 deg nailing through the joist into the header resulting in higher loads and less nailing. Slant/double shear nailing allows for higher load values, fewer nails and faster installation...
$3.51
MFG: USP LUMBER CONNECTORS
Model No: JUS210-2TZ
The JUS hanger Series offers double shear nailing. USP's dimple allows for 30 deg to 45 deg nailing through the joist into the header resulting in higher loads and less nailing. Slant/double shear nailing allows for higher load values, fewer nails and faster installation...
$6.69
MFG: USP LUMBER CONNECTORS
Model No: JUS210-3
The JUS hanger Series offers double shear nailing. USP's dimple allows for 30 deg to 45 deg nailing through the joist into the header resulting in higher loads and less nailing. Slant/double shear nailing allows for higher load values, fewer nails and faster installation...
$6.67
MFG: USP LUMBER CONNECTORS
Model No: JUS210-3TZ
The JUS hanger Series offers double shear nailing. USP's dimple allows for 30 to 45 deg nailing through the joist into the header resulting in higher loads and less nailing. Slant/double shear nailing allows for higher load values, fewer nails and faster installation...
$10.24
MFG: USP LUMBER CONNECTORS
Model No: JUS210-TZ
The JUS hanger Series offers double shear nailing. USP's dimple allows for 30 deg to 45 deg nailing through the joist into the header resulting in higher loads and less nailing. Slant/double shear nailing allows for higher load values, fewer nails and faster installation...
$2.71
MFG: USP LUMBER CONNECTORS
Model No: JUS24
The JUS hanger Series offers double shear nailing. USP's dimple allows for 30 deg to 45 deg nailing through the joist into the header resulting in higher loads and less nailing. Slant/double shear nailing allows for higher load values, fewer nails and faster installation...
$1.10
MFG: USP LUMBER CONNECTORS
Model No: JUS24-TZ
The JUS hanger Series offers double shear nailing. USP's dimple allows for 30 to 45 deg nailing through the joist into the header resulting in higher loads and less nailing. Slant/double shear nailing allows for higher load values, fewer nails and faster installation...
$1.26
MFG: USP LUMBER CONNECTORS
Model No: JUS26
The JUS hanger Series offers double shear nailing. USP's dimple allows for 30 deg to 45 deg nailing through the joist into the header resulting in higher loads and less nailing. Slant/double shear nailing allows for higher load values, fewer nails and faster installation...
$1.36
MFG: USP LUMBER CONNECTORS
Model No: JUS26-2
The JUS hanger Series offers double shear nailing. USP's dimple allows for 30 deg to 45 deg nailing through the joist into the header resulting in higher loads and less nailing. Slant/double shear nailing allows for higher load values, fewer nails and faster installation...
$2.82
MFG: USP LUMBER CONNECTORS
Model No: JUS26-2TZ
The JUS hanger Series offers double shear nailing. USP's dimple allows for 30 deg to 45 deg nailing through the joist into the header resulting in higher loads and less nailing. Slant/double shear nailing allows for higher load values, fewer nails and faster installation...
$3.60
MFG: USP LUMBER CONNECTORS
Model No: JUS26-GC
The JUS hanger Series offers double shear nailing. USP's dimple allows for 30 to 45 deg nailing through the joist into the header resulting in higher loads and less nailing. Slant/double shear nailing allows for higher load values, fewer nails and faster installation...
$3.33
MFG: USP LUMBER CONNECTORS
Model No: JUS28
The JUS hanger Series offers double shear nailing. USP's dimple allows for 30 to 45 deg nailing through the joist into the header resulting in higher loads and less nailing. Slant/double shear nailing allows for higher load values, fewer nails and faster installation...
$1.63
MFG: USP LUMBER CONNECTORS
Model No: JUS28-2
The JUS hanger Series offers double shear nailing. USP's dimple allows for 30 deg to 45 deg nailing through the joist into the header resulting in higher loads and less nailing. Slant/double shear nailing allows for higher load values, fewer nails and faster installation...
$3.67
MFG: USP LUMBER CONNECTORS
Model No: JUS28-2TZ
The JUS hanger Series offers double shear nailing. USP's dimple allows for 30 to 45 deg nailing through the joist into the header resulting in higher loads and less nailing. Slant/double shear nailing allows for higher load values, fewer nails and faster installation...
$6.17
MFG: USP LUMBER CONNECTORS
Model No: JUS28-3TZ
The JUS hanger Series offers double shear nailing. USP's dimple allows for 30 deg to 45 deg nailing through the joist into the header resulting in higher loads and less nailing. Slant/double shear nailing allows for higher load values, fewer nails and faster installation...
$9.76
MFG: USP LUMBER CONNECTORS
Model No: JUS28-TZ
The JUS hanger Series offers double shear nailing. USP's dimple allows for 30 to 45 deg nailing through the joist into the header resulting in higher loads and less nailing. Slant/double shear nailing allows for higher load values, fewer nails and faster installation...
$1.93
MFG: USP LUMBER CONNECTORS
Model No: JUS44-TZ
The JUS hanger Series offers double shear nailing. USP's dimple allows for 30 deg to 45 deg nailing through the joist into the header resulting in higher loads and less nailing. Slant/double shear nailing allows for higher load values, fewer nails and faster installation...
$4.65
MFG: USP LUMBER CONNECTORS
Model No: JUS46-TZ
The JUS hanger Series offers double shear nailing. USP's dimple allows for 30 to 45 deg nailing through the joist into the header resulting in higher loads and less nailing. Slant/double shear nailing allows for higher load values, fewer nails and faster installation...
$5.27
MFG: USP LUMBER CONNECTORS
Model No: LSSH15-TZ
The LSSH Series connects rafters to ridge beams in vaulted roof structures. This Series is field adjustable to meet a variety of skew and/or slope applications. Slopes and skews 0 to 45 deg...
$10.98
MFG: USP LUMBER CONNECTORS
Model No: LSSH210-TZ
The LSSH Series connects rafters to ridge beams in vaulted roof structures. This Series is field adjustable to meet a variety of skew and/or slope applications. Slopes and skews 0 to 45 deg...
$23.09
MFG: USP LUMBER CONNECTORS
Model No: RR
The RR ridge rafter supports rafter pitches up to 7:12 (30 deg). Nesting top flange for back-to-back installation on 2X support beams...
$2.22