MFG: USP LUMBER CONNECTORS
Model No: A3-TZ
Eliminates toenailing and increases strength. Requires 10d x 1-1/2 in nails for installation. 1-7/16 in W1 x 1-7/16 in W2 x 2-3/4 in L, 18 ga. Meets ICC-ES ESR-2104, FL820 and L.A. City RR25745 codes...
$2.22
MFG: USP LUMBER CONNECTORS
Model No: AC5-TZ
For general-purpose reinforcements of many framing connections. G185 galvanized finish. Can be used in both new construction and retrofit applications. Staggered nail patterns reduce wood splitting and allows installation on both sides of the supported member. Triple zinc clips require 10d HDG or 16..
$3.63
MFG: USP LUMBER CONNECTORS
Model No: AC7
For general-purpose reinforcements of many framing connections. G185 galvanized finish. Can be used in both new construction and retrofit applications. Staggered nail patterns reduce wood splitting and allows installation on both sides of the supported member. Triple zinc clips require 10d HDG or 16..
$4.35
MFG: USP LUMBER CONNECTORS
Model No: AC7-TZ
For general-purpose reinforcements of many framing connections. G185 galvanized finish. Can be used in both new construction and retrofit applications. Staggered nail patterns reduce wood splitting and allows installation on both sides of the supported member. Triple zinc clips require 10d HDG or 16..
$6.03
MFG: USP LUMBER CONNECTORS
Model No: AC9-TZ
For general-purpose reinforcements of many framing connections. G185 galvanized finish. Can be used in both new construction and retrofit applications. Staggered nail patterns reduce wood splitting and allows installation on both sides of the supported member. Triple zinc clips require 10d HDG or 16..
$8.29
MFG: USP LUMBER CONNECTORS
Model No: B66
Multi-purpose braces are designed to provide reinforcement for 90 deg wood-to-wood connections...
$8.11
MFG: USP LUMBER CONNECTORS
Model No: BL3
Multi-purpose braces are designed to provide reinforcement for 90 deg wood-to-wood connections...
$3.83
MFG: USP LUMBER CONNECTORS
Model No: BL4
Multi-purpose braces are designed to provide reinforcement for 90 deg wood-to-wood connections...
$6.09
MFG: USP LUMBER CONNECTORS
Model No: BL6
Multi-purpose braces are designed to provide reinforcement for 90 deg wood-to-wood connections...
$6.95
MFG: USP LUMBER CONNECTORS
Model No: CSH-TZ
The CSH-TZ concealed stringer hanger provides a method of connecting a stair stringer with a hidden hanger. The seat of the hanger is adjustable to match the slope of the stair stringer. The reversible design allows the connector to be used on the left, right or interior stringers. The CSH-TZ may be..
$4.05
MFG: USP LUMBER CONNECTORS
Model No: HCPRS
These anchors tie trusses and rafters to top plates and may be used to tie wood framing members to resist uplift and lateral forces...
$2.43
MFG: USP LUMBER CONNECTORS
Model No: JA1
Used to strengthen framing in various applications or to support joists where stirrup style hangers cannot be installed. Requires 10d x 1-1/2 nails for installation. Meets ICBO, SBCCI, BOCA - NER 505; L.A. City RR25303, DSA PA-076; and Dade County, FL 98-0421.06 codes. For additional information inc..
$1.00
MFG: USP LUMBER CONNECTORS
Model No: JA1-TZ
Used to strengthen framing in various applications or to support joists where stirrup style hangers cannot be installed. Requires 10d x 1-1/2 nails for installation. Meets ICBO, SBCCI, BOCA - NER 505, L.A. City RR25303, DSA PA-076 and Dade County, FL 98-0421.06 codes. For additional information incl..
$0.93
MFG: USP LUMBER CONNECTORS
Model No: KHL33
Designed for heavy-duty reinforcement of 90 deg framing intersections. USP primer finish. Requires two 5/8 in bolts for installation. Meets ICBO 2725, L.A. City RR 25104. 7 Gauge...
$8.65
MFG: USP LUMBER CONNECTORS
Model No: ML24-TZ
ML angles are multi-purpose angles that install easily with USP's WS15 wood screws. The staggered fastener pattern allows for back-to-back installations...
$3.05
MFG: USP LUMBER CONNECTORS
Model No: ML26-TZ
ML angles are multi-purpose angles that install easily with USP's WS15 wood screws. The staggered fastener pattern allows for back-to-back installations...
$4.00
MFG: USP LUMBER CONNECTORS
Model No: MP34
Use for joist/header installations. Does not have tabs. G90 galvanizing finish. Requires 8d x 1-1/2 nails. Meets SBCCI, BOCA - NER 505, ICBO 5736, DSA PA-076, Dade County, FL 01-0417.11 and L.A. City RR25303 codes. 18 ga...
$0.72
MFG: USP LUMBER CONNECTORS
Model No: MP5-TZ
May be field adjusted by hand from 0 to 135 deg, giving framers and do-it-yourselfers flexibility in applications. Bend angle only once. G90 galvanized finish. 10d HDG nails required for installation. Meets SBCCI, BOCA - NER 530, ICBO 5700, FL822, L.A. City RR 25337, DSA PA-06 codes...
$3.27
MFG: USP LUMBER CONNECTORS
Model No: MP9-TZ
May be field adjusted by hand from 0 to 135 deg, giving framers and do-it-yourselfers flexibility in applications. Bend angle only once. G90 galvanized finish. 10d HDG nails required for installation. Meets SBCCI, BOCA - NER 530, ICBO 5700, FL822, L.A. City RR 25337, DSA PA-06 codes...
$7.26
MFG: USP LUMBER CONNECTORS
Model No: MPA1
Use for joist to header, rafter to plate, stud to plate or 1 in foam board installations. Achieves continuous load path in high wind and seismic resistant construction. Enables quick field adjustments for 2 and 3-way connections. Tabs enable two and three-way connections. Bend tabs only once. Requir..
$1.20
MFG: USP LUMBER CONNECTORS
Model No: MPA1-GC
Use for joist to header, rafter to plate, stud to plate or 1 in foam board installations. Achieves continuous load path in high wind and seismic resistant construction. Enables quick field adjustments for 2 and 3-way connections. Tabs enable two and three-way connections. Bend tabs only once. Requir..
$2.57
MFG: USP LUMBER CONNECTORS
Model No: MPA1-TZ
Use for joist to header, rafter to plate, stud to plate or 1 in foam board installations. Achieves continuous load path in high wind and seismic resistant construction. Enables quick field adjustments for 2 and 3-way connections. Tabs enable two and three-way connections. Bend tabs only once. Requir..
$1.42
MFG: USP LUMBER CONNECTORS
Model No: RT10
These anchors tie trusses and rafters to top plates and may be used to tie wood framing members to resist uplift and lateral forces...
$1.96
MFG: USP LUMBER CONNECTORS
Model No: RT15
These anchors tie trusses and rafters to top plates and may be used to tie wood framing members to resist uplift and lateral forces...
$1.26
MFG: USP LUMBER CONNECTORS
Model No: RT15-TZ
These anchors tie trusses and rafters to top plates and may be used to tie wood framing members to resist uplift and lateral forces...
$1.46
MFG: USP LUMBER CONNECTORS
Model No: RT16A
These anchors tie trusses and rafters to top plates and may be used to tie wood framing members to resist uplift and lateral forces...
$4.18
MFG: USP LUMBER CONNECTORS
Model No: RT16ATZ
These anchors tie trusses and rafters to top plates and may be used to tie wood framing members to resist uplift and lateral forces...
$5.63
MFG: USP LUMBER CONNECTORS
Model No: RT3A
These anchors tie trusses and rafters to top plates and may be used to tie wood framing members to resist uplift and lateral forces...
$0.73
MFG: USP LUMBER CONNECTORS
Model No: RT5
These anchors tie trusses and rafters to top plates and may be used to tie wood framing members to resist uplift and lateral forces...
$0.91
MFG: USP LUMBER CONNECTORS
Model No: RT7
These anchors tie trusses and rafters to top plates and may be used to tie wood framing members to resist uplift and lateral forces...
$0.69
MFG: USP LUMBER CONNECTORS
Model No: RT7A
These anchors tie trusses and rafters to top plates and may be used to tie wood framing members to resist uplift and lateral forces...
$0.62
MFG: USP LUMBER CONNECTORS
Model No: RT7A-TZ
These anchors tie trusses and rafters to top plates and may be used to tie wood framing members to resist uplift and lateral forces...
$0.76
MFG: USP LUMBER CONNECTORS
Model No: RT8A
These anchors tie trusses and rafters to top plates and may be used to tie wood framing members to resist uplift and lateral forces...
$0.88
MFG: USP LUMBER CONNECTORS
Model No: SCA10-TZ
Stair angles simplify stair construction. There is no need to calculate and notch stair stringers. Stronger and safer than wood blocking and the angle and fasteners are hidden from view...
$9.40
MFG: USP LUMBER CONNECTORS
Model No: SCA9-GC
Stair angles simplify stair construction. There is no need to calculate and notch stair stringers. Stronger and safer than wood blocking and the angle and fasteners are hidden from view...
$12.42
MFG: USP LUMBER CONNECTORS
Model No: SCA9-TZ
Stair angles simplify stair construction. There is no need to calculate and notch stair stringers. Stronger and safer than wood blocking and the angle and fasteners are hidden from view...
$7.51
MFG: USP LUMBER CONNECTORS
Model No: SPT22
Used to reinforce 2X stud-to-single or double plate connections. For site or factory built wall applications. G90 galvanizing finish. Requires 10d nails. Meets ICC-ES ESR-1465 and FL817 codes. For additional information including allowable loads and number of fasteners, please see USP Lumber Connect..
$1.71
MFG: USP LUMBER CONNECTORS
Model No: SPT24
Used to reinforce 2X stud-to-single or double plate connections. For site or factory built wall applications. G90 galvanizing finish. Requires 10d nails. Meets ICC-ES ESR-1465 and FL817 codes. For additional information including allowable loads and number of fasteners, please see USP Lumber Connect..
$2.36
MFG: USP LUMBER CONNECTORS
Model No: SPTH4-TZ
Connects stud to single or double plates. G90 galvanized finish. Requires 12 10d x 1-1/2 nails. Meets ICC-ES ESR-1881, FL821 and L.A. City RR25779 codes...
$2.56
MFG: USP LUMBER CONNECTORS
Model No: ST1-TZ
For securing mudsills and framing into concrete slabs or poured stem walls. Not for block installation or securing concrete sections together between cold joints. Features prevent base flange for proper anchoring into concrete. Use a minimum of 2 anchors per mudsill within 12 in of the end of each s..
$1.85
MFG: USP LUMBER CONNECTORS
Model No: ST2-TZ
For securing mudsills and framing into concrete slabs, poured stem walls or concrete block. Not for securing concrete sections together between cold joints. Features prevent base flange for proper anchoring into concrete. Use a minimum of 2 anchors per mudsill within 12 in of the end of each section..
$3.22
MFG: USP LUMBER CONNECTORS
Model No: TTA2-TZ
An angle connects two 2X wood members at 90 deg angles, G185 galvanizing finish, requires eight USP LumberLok LL915 (#9 x 1-3/8 in L) wood screws not included...
$2.54
MFG: USP LUMBER CONNECTORS
Model No: TTR-TZ
A clip connects a 2X wood member to the face of another wood member, 20 ga, G-185 galvanizing finish, requires six USP LumberLok LL915 (#9 x 1-3/8 in L) wood screws not included...
$1.93
MFG: SIMPSON STRONG-TIE CANADA
Model No: A21
Simpson Strong-Tie A Angle, Steel, Galvanized, 1-1/2 in W, 2 in D, 1-3/8 in H, Fastener Type: Nails, Material Thickness: 18 ga..
$0.79