-
Vendor: ARROW
Arrow PT18G Pneumatic Brad Nailer
The PT18G is the ideal companion for most small trim and interior molding work. The non-marring rubber tip helps protect the project surface and the contact safety prevents misfires. Made of lightweight die-cast aluminum, it is easy to handle, yet durable enough for consistent...- $60.49
- $60.49
- Unit price
- per
-
Vendor: ARROW
Arrow PT23G Pneumatic Pin Nailer
Arrow's PT23G pneumatic pin nailer is great for trim jobs, crafts and hobby work that require headless pin nails. The tool features a lightweight compact design, adjustable exhaust cover, contact safety and overmolded grip. PT23G comes with all necessary fittings and operates on home...- $50.09
- $50.09
- Unit price
- per
-
Vendor: BOSTITCH
Bostitch EHF1838K Flooring Stapler, 1 to 1-1/2 in W Crown, 1 to 1-1/2 in L Leg, 100 Magazine, 160 in-lb Air
This 18 ga flooring stapler is convenient and low maintenance. it is designed to adjust knobs for different floor thicknesses. Depend on this flooring stapler for versatility and easy management. Adjustable knobs allow for tool-free adjustment 5/16 to 7/16 in for solid hardwood and...- $240.32
- $240.32
- Unit price
- per
-
Vendor: BOSTITCH
Bostitch MIIIFN Flooring Nailer Conversion Kit, 110 Magazine, 1-1/2 to 2 in L Fastener, 4.2 cfm/Shot Air
Use this industrial flooring cleat to convert the flooring stapler into a hardwood flooring cleat nailer. The tools feature a contoured foot to fit snugly on to the boards, positioning the tool ideally for an extremely accurate and neat result Built to drive either...- $476.45
- $476.45
- Unit price
- per
-
Vendor: BOSTITCH
Bostitch N80CB-1 Framing Nailer, 300 Magazine, 15 deg Collation, Wire Weld Collation, 0.079 cfm/Shot Air
This round head coil framing nailer is a strong coil framing nailer. It is housed in aluminum and has a large-capacity magazine for durability and convenience. Heavy-duty, quick-open canister designed to survive falls Aggressive toenail teeth grip lumber for slip-free nailing Coil magazine holds...- $388.08
- $388.08
- Unit price
- per
-
Vendor: BOSTITCH
Bostitch ORK11 O-Ring Kit, For: N79, N80, N90, N95 Nailer
All air tool repair kits enable the users to recondition these tools at minimum cost and with little 'down time'. Special lubricant is provided with every O-ring kit. Contains all O-rings necessary to rebuild the N80, N90.- $56.06
- $56.06
- Unit price
- per
-
Vendor: METABO HPT
Metabo HPT NT65M2SM Finish Nailer, 100 Magazine, Straight Collation, 2-1/2 in Fastener
The NT65M2(S) 16 ga finish nailer features a non-slip elastomer grip trigger and ergonomically designed simple flip actuation switch. It is ideal for installing moulding, chair rail, cabinetry and other fine finish applications. The NT65M2(S) accepts 16 ga finish nails in lengths ranging from...- $164.26
- $164.26
- Unit price
- per
-
Vendor: SENCO
Senco VB0155 Lithium Battery, 18 V Battery, 1.5 Ah
For use with Senco Fusion cordless nailers and DuraSpin 18 V Lithium-Ion tools. Reaches 80% in approximately 15 mins. Battery charges even when "hot". Quick release for easy battery charging. High-quality reliable cells Charges 80% in 15 mins Longer storage life- $94.86
- $94.86
- Unit price
- per
-
Vendor: SENCO
Senco VB0156 Battery Charger, 18 V Output, 1.5 Ah, 15 to 20 min Charge, Battery Included: No
Battery charger can be used interchangeably with Senco VB0155, VB0161 and VB0118 batteries. Quick charging system reaches 80% in just 15- 20 mins. Battery charge indicators display the charge status of your battery.- $83.70
- $83.70
- Unit price
- per
-
Vendor: ARROW
Arrow PT50 Stapler, 1/4 to 9/16 in L Leg, 100 Magazine
The Arrow PT50 delivers serious pneumatic tool performance at a price everyone will love. Packed with features like an easy-load magazine, overmolded comfort grip, adjustable exhaust cover and contact safety. This tool has the power and versatility to tackle any home project. And, it's...- $39.94
- $39.94
- Unit price
- per
-
Vendor: BOSTITCH
Bostitch WINTEROIL-4OZ Pneumatic Tool Lubricant, 4 oz Bottle
Prevents moisture coming into the tool from freezing. Switch to winter-grade lubricant in temperatures below 32 deg F to maintain properly Designed for use in all pneumatic tools requiring oil- $6.12
- $6.12
- Unit price
- per
-
Vendor: BOSTITCH
Bostitch MIIIFS Flooring Stapler Kit, 1/2 in W Crown, 1-1/2 to 2 in L Leg, 92 Magazine, 420 in-lb Air
This flooring stapler kit is used for floor nailing. Pneumatic power drives nails and cleats into the wood surface quickly and efficiently. Depend on this flooring stapler kit for stability and a comfortable grip. High-speed, mallet actuated pneumatic operation increases productivity over manual methods...- $476.45
- $476.45
- Unit price
- per
-
Vendor: METABO HPT
Metabo HPT NV45AB2 Roofing Nailer, 120 Magazine, 16 deg Collation
Tool-less depth of drive adjustment for precision nailing/flush driving. Carbide tipped push lever reduces wear. Pneumatic nail feed mechanism powers both the nail advance and return for consistent operation even in the harshest of conditions. 16 deg magazine angle, contact actuation, 3/8 in sequential...- $285.52
- $285.52
- Unit price
- per
-
Vendor: BOSTITCH
Bostitch N66C-1 Siding Nailer, 300 Magazine, 15 deg Collation, Wire Weld Collation, 0.033 scfm Air
This 15 deg coil siding nailer is designed for wire weld and plastic inserted coil nails. Quickly and conveniently set nails to the desired depth. Depend on this 15 deg coil siding nailer for a lightweight and durable construction. Drives wire weld and plastic...- $320.44
- $320.44
- Unit price
- per
-
Vendor: BOSTITCH
Bostitch MCN250 Metal Connector Nailer, 53 Magazine, 35 deg Collation, Paper Tape Collation, 7.7 cfm/Shot Air
Use this metal connector nailer STRAPSHOT™ with metal framing hardware. Application is quick and precise. It is lightweight and easy to maneuver. Depend on this metal connector nailer strength and durability. Exposed nail tip places fastener point directly into connector holes for a fast...- $388.73
- $388.73
- Unit price
- per
-
Vendor: BOSTITCH
Bostitch TVA6 Trigger Valve Kit
Fits N50, N55, N57, N60, N63, N65, N70, N80, N86, N90; Also N100, 650, 750, 850, 863, T55, T60, RN45, N95RHN. Kit includes Bostitch TVA6 trigger assembly, valve assembly, lubricant, two orifice caps. Spring pin punch, complete instructions.- $37.61
- $37.61
- Unit price
- per
-
Vendor: BOSTITCH
Bostitch BTFP2350K Pin Nailer, 135 Magazine, Straight Collation, 5/8 to 2 in L Fastener
Our 23 ga pin nailer sets 2 in. Nails recessed into trim and finish materials, including oak and other dense wood. Innovative features like tool-free jam release and depth adjustment help you keep working without stopping to look for a hex key. Drives 23...- $168.27
- $168.27
- Unit price
- per
-
Vendor: BOSTITCH
Bostitch BTFP72155 Finish Nailer Kit, 100 Magazine, Glue Collation, 2-1/2 in Fastener
Use this Smart Point® 15 ga "DA" style angle finish nailer kit in tight spaces. Control the depth of the nail without interrupting workflow and easily remove nails with tool-free jam release feature. Depend on this 15 ga finish nailer kit for efficiency and...- $202.20
- $202.20
- Unit price
- per
-
-
Vendor: BOSTITCH
Bostitch BTF83WW Framing Nailer, 100 Magazine, 28 deg Collation, Wire Weld Collation, 6.4 cfm/Shot Air
Bostitch Framing Nailer, 3/8 in Air Inlet, Air Consumption: 6.4 cfm/Shot, Air Pressure: 70 to 120 psi, Magazine Capacity: 100, Magazine Loading: Top, Collation Angle: 28 deg, Collation Type: Wire Weld, Exhaust Type: Fixed, Fastener Size: 0.113 to 0.131 in Dia x 2 to...- $260.95
- $260.95
- Unit price
- per
-
Vendor: BOSTITCH
Bostitch BTF83PT Framing Nailer, 90 Magazine, 30 deg Collation, Paper Collation, 6.4 cfm/Shot Air
Bostitch Framing Nailer, 3/8 in Air Inlet, Air Consumption: 6.4 cfm/Shot, Air Pressure: 70 to 120 psi, Magazine Capacity: 90, Collation Angle: 30 deg, Collation Type: Paper, Exhaust Type: Fixed, Fastener Size: 0.113 to 0.131 in Dia x 2 to 3-1/4 in L, Triggering...- $260.95
- $260.95
- Unit price
- per
-
Vendor: BOSTITCH
Bostitch BTFP72156 Finish Nailer Kit, 129 Magazine, Glue Collation, 1-1/4 to 2-1/2 in Fastener
This Smart Point® 15 ga "FN" style angle finish nailer kit offers greater nail collation density so that you can drive more nails without having to refill your magazine often. This FN style 15 ga holds 130 nails in its magazine compared to our...- $211.76
- $211.76
- Unit price
- per
-
Vendor: BOSTITCH
Bostitch BTFP12233 Brad Nailer Kit, 100 Magazine, Glue Collation, 5/8 to 2-1/8 in L Fastener, 1.15 cfm Air
Use this SMART POINT® 18 ga nailer kit for cabinetry, upholstery and paneling. Choose from trigger system and countersinking options that best meet your project needs. depend on this SMART POINT® 18 ga nailer kit for efficiency and durability. Smart Point™ technology easy nail...- $130.80
- $130.80
- Unit price
- per
-
Vendor: BOSTITCH
Bostitch BTFP71917 Finish Nailer Kit, 100 Magazine, Glue Collation, 2-1/2 in Fastener
Use this Smart Point® 16 ga finish nailer kit on thick trim. Control the depth of the nail without interrupting workflow and easily remove nails with tool-free jam release feature. Depend on this 16 ga finish nailer kit for efficiency and precision. Drives 16...- $199.98
- $199.98
- Unit price
- per
-
Vendor: DEWALT
DeWALT PRECISION POINT Series DWFP72155 Finish Nailer, 100 Magazine, Glue Collation
PRECISION POINT technology for precise nail placement due to a smaller nose, compared to current DeWALT® nailers and no need to compress the contact trip to actuate the tool. Tool-free jam release mechanism for easy nail removal. Selectable trigger, sequential or contact actuation. 16...- $224.46
- $224.46
- Unit price
- per
-
Vendor: DEWALT
DeWALT DWF83PT Framing Nailer, 90 Magazine, 30 deg Collation, Paper Tape Collation
30 deg paper tape collated framing nailer. Industrial-grade design for high-speed and high volume framing applications. Recoil dampening engine system to minimize recoil. Lightweight at only 8.1 lb with enhanced ergonomics and balance for comfort and control. Tool-free features depth of drive adjustment for...- $288.27
- $288.27
- Unit price
- per
-
Vendor: DEWALT
DeWALT DWMC150 Connector Nailer, 29 Magazine, 35 deg Collation, Paper Tape Collation
At 10.5 in (26.7 cm) tall, fits conveniently inside 12 in (30.5 cm) on-center framing and other tight areas. Fastener placement made easy with exposed nail tip. Tool-free adjustable rafter hook for convenience. Low nail lockout helps prevent jamming. In-line magazine for a well...- $262.88
- $262.88
- Unit price
- per
-
Vendor: DEWALT
DeWALT DWF83PL Framing Nailer, 64 Magazine, 21 deg Collation, Plastic Strip Collation
Industrial-grade design for high-speed and high volume framing applications. Recoil dampening engine system to minimize recoil. Adjustable rafter hook. Lightweight at only 8 lb with enhanced ergonomics and balance for comfort and control. Tool-free features depth-of-drive adjustment for precise setting of fasteners and selectable...- $265.88
- $265.88
- Unit price
- per
-
Vendor: DEWALT
DeWALT DWF83WW Framing Nailer, 100 Magazine, 28 deg Collation, Wire Weld Collation
28 deg wire weld framing nailer. Industrial-grade design for high-speed and high volume framing applications. Recoil dampening engine system to minimize recoil. Lightweight at only 8.1 lb with enhanced ergonomics and balance for comfort and control. Tool-free features depth of drive adjustment for precise...- $288.27
- $288.27
- Unit price
- per
-
Vendor: DEWALT
DeWALT PRECISION POINT Series DWFP71917 Finish Nailer, 100 Magazine, Glue Collation
PRECISION POINT technology, easy nail placement as a result of a smaller nose compared to current DeWALT® nailers and no need to compress the contact trip to actuate the tool. Long life maintenance-free motor to keep from staining the work surface. Tool-free depth-of-drive adjustment...- $205.79
- $205.79
- Unit price
- per
-
Vendor: SENCO
Senco FinishPro Series 6G0001N Finish Nailer, 110 Magazine, 34 deg Collation, Plastic Strip Collation, 3.2 scfm Air
The FIP35Mg's magnesium body delivers an ultra-light tool with Senco dependability. The oil-free design, selective actuation, rotating exhaust, rotating belthook and push-button air blower combine to provide a tool that will perform the toughest jobs while delivering professional results and comfortable operation. EZ-Clear™ latch...- $179.51
- $179.51
- Unit price
- per
-
Vendor: SENCO PRODUCTS
NAILER BRAD 18GA 2-1/8IN
Experience award winning cordless convenience in an all-day, everyday cordless pneumatic trim tool. Features instant shot performance with no ramp up time. No hose or air compressor to drag around. Never buy fuel cells again. Thumbwheel depth-of-drive adjustment. Specs: selectable actuation trigger firing mode,...- $412.47
- $412.47
- Unit price
- per
-
Vendor: PASLODE
Paslode IM250ALi Angled Finish Nailer, Battery Included, 7.4 V, 1.5 Ah, 100 Magazine, 20 deg Collation, Angled Collation
Paslode Angled Finish Nailer, Tool Only/Battery Included: Battery Included, Battery Voltage: 7.4 V, Battery Capacity: 1.5 Ah, Magazine Capacity: 100, Collation Angle: 20 deg, Collation Type: Angled, Nail Gauge: 16 ga, Fastener Size: 1-1/4 to 2-1/2 in L, Includes: 16 ga Angled Li-ion Cordless...- $380.65
- $380.65
- Unit price
- per
-
Vendor: PASLODE
Paslode 900200 Battery Charger, 120 VAC Input, 6 V Output, 1, 6 Volt Charge, 2 hr Charge, 0-Battery
The Paslode battery charger for all Paslode Cordless Tools is constructed to provide long-lasting, hassle-free use and delivers top performance results. Specially designed with voltage sensing electronics preventing overcharging. Fully charges battery in only 2-hours for added convenience and less downtime. Use with Paslode...- $63.00
- $63.00
- Unit price
- per
-
Vendor: PASLODE
Paslode IM200LI Brad Nailer, Battery Included, 7.4 V, 100 Magazine, Strip Collation, 18 ga Nail, Nail Fastener
Paslode's 18 Ga Cordless Brad Nailer is designed for accurate nail placement and detailed trim work. Weighing only 4.6 lb, our 18 Ga Cordless Lithium-ion is the lightest Cordless Brad Nailer in the market that will help to reduce jobsite fatigue and provide better...- $326.47
- $326.47
- Unit price
- per
-
Vendor: PASLODE
Paslode 918100 Brad Nailer, Battery Included, 7.4 VDC, Straight Collation, 18 ga Nail, Nail Fastener
The new Paslode 18 ga cordless lithium-ion brad nailer is the ideal nailer for all of your trim projects. This tools has superior access to tight spaces so you are able to fasten in areas that aren't easily accessible. This consistent nailer makes your...- $348.05
- $348.05
- Unit price
- per
-
Vendor: PASLODE
Paslode 902667 Battery Charger, Lithium-Ion Battery
Paslode Battery Charger, 120 VAC Input, Lithium-Ion Battery, 1.5 hr Charge Time, Suitable for: Paslode 902654 7.4 V Li-Ion Battery Battery is fully charged in 1.5 hr and drives up to 9000 nails per charge in framing nailers and 12000 nails per charge in...- $70.56
- $70.56
- Unit price
- per
-
Vendor: PASLODE
Paslode 816008 Framing Fuel, Steel, Orange
Paslode fuel cells give you the power to drive up to 1,200 nails and are easy to load. Use Paslode fuel cells as part of your nailing system to keep going until the job is done. Works in all seasons down to 18 deg...- $13.90
- $13.90
- Unit price
- per
-
Vendor: PASLODE
Paslode 816007 Trim Fuel, Universal, Yellow, For: Paslode Cordless Finish Nailers
Non-stop nailing for up to 1000 nails. Load and go. Provides a precise fuel dose for reliable drive performance. Convenient, easy-to-install, just load and go Premium-grade fuel Provides a precise fuel dose for reliable drive performance Universal trim fuel works with all Paslode cordless...- $19.49
- $19.49
- Unit price
- per
-
Vendor: PASLODE
Paslode 902654 Rechargeable Battery, 7.4 V Battery, 2 hr Charging
Paslode Rechargeable Battery, 7.4 V Battery, 2 hr Charging 16 ga angled cordless Li-ion finish nailer Cordless Li-ion framing nailer 16 ga straight cordless Li-ion finish nailer- $92.61
- $92.61
- Unit price
- per
-
Vendor: METABO HPT
Metabo HPT NR83A5M Pneumatic Framing Nailer, 64 Magazine, 21 deg Collation, Plastic Strip Collation
The NR83A5 full round head framing nailer with depth adjustment is used for floor and wall framing, truss build-up, window build-up, construction of subflooring and roof decking, wall sheathing and mobile home and modular home construction. The NR83A5 is like the original NR83A that...- $324.08
- $324.08
- Unit price
- per
-
Vendor: METABO HPT
Metabo HPT NR90ADS1M Framing Nailer, 86 to 94 Magazine, Paper Collation, 0.09 scfm Air
Great 3-1/2 in 30 deg paper collated framing nailer for flooring and framing, truss build-up, roof decking, wall sheathing and housing construction. The lightweight Paper Collated Framing Nailer weighs only 7 lb, making it easy to use all day, while still providing the power...- $190.36
- $190.36
- Unit price
- per
-
Vendor: METABO HPT
Metabo HPT NR83A5SM Framing Nailer, 64 Magazine, Plastic Strip Collation
The NR83A5(S) full round head framing nailer without depth adjustment is used for floor and wall framing, truss build-up, window build-up, construction of subflooring and roof decking, wall sheathing and mobile home and modular home construction. The NR83A5(S) is like the original NR83A that...- $312.54
- $312.54
- Unit price
- per
-
Vendor: SENCO
Senco PC1195 Hand Nailer, 1 Magazine, 2 to 3-1/2 in L Fastener, 3 scfm Air
The Senco PC1195 mini pneumatic hand nailer drives bulk nails up to 3 1/2 in applications to tight to swing a hammer. Compact and powerful enough to drive 2 to 3-1/2 in bulk nails Magnetic nose with recessed nail slot holds nails stable for...- $54.69
- $54.69
- Unit price
- per
-
Vendor: METABO HPT
Metabo HPT N3804AB3 Stapler, 1/4 in W Crown, 1/2 to 1-1/2 in L Leg, Narrow Crown Staple, 125 Magazine, 70 cu-ft Air
New selective actuation switch lets the user easily select bump fire or sequential fire modes. Lightweight and compact with 360 deg adjustable exhaust and elastomer grip. Tool-less, easy-to-clear nose and depth of drive. Weighs 2.2 lb, dimension of 10-11/32 in L x 2-3/8 in...- $114.90
- $114.90
- Unit price
- per
-
Vendor: METABO HPT
Metabo HPT NV83A5 Framing Nailer, 200 to 300 Magazine, 16 deg Collation, Wire Collation, 2 to 3-1/4 in Fastener
The NV83A5 round head coil framing nailer is used for construction work such as wall sheathing, roof decking, subflooring, mobile and modular home construction, making of wooden boxes, pallets and drums, packing operations in manufacturing plants and for other types of general packing and...- $394.19
- $394.19
- Unit price
- per
-
Vendor: METABO HPT
Metabo HPT NV90AGS Framing Nailer, 200 to 300 Magazine, 16 deg Collation, Wire Collation, 0.09 scfm Air
The NV90AG(S) framing nailer drives wire collated nails from 1-3/4 in up to 3-1/2 in length and features Hitachi's next generation industrial design. The redesigned head guard allows for faster and easier disassembly process, saving valuable time during tool maintenance. Weighing only 7.7 lb,...- $295.40
- $295.40
- Unit price
- per
-
Vendor: BOSTITCH
Bostitch N89ORK O-Ring Kit, For: F21, F28, F33 and N89C Tools
Contains all O-rings necessary to rebuild the F21, F28, F33, N89C tools. Does not include trigger valve or trigger valve O-rings. Contains all o-rings necessary to rebuild the F21, F8, F33, N89C tools. Does not include trigger valve or trigger valve o-rings Performance kits...- $42.24
- $42.24
- Unit price
- per
-
Vendor: PASLODE
Paslode 515700 Framing Stapler, 2 in Air Inlet, 150 Magazine, Galvanized, 1/2 in W Crown
Paslode Framing Stapler, 2 in Air Inlet, Air Pressure: 80 to 120 psi, 150 Magazine, Firing Mode: 10 Staples/s, Galvanized, 1/2 in W Crown, Exhaust Type: Adjustable, 10-3/4 in H Dimensions, Includes: Safety Glasses, Quick Clear- $321.16
- $321.16
- Unit price
- per
-
Vendor: PASLODE
Paslode T250S-F16P Pneumatic Finish Nailer, Straight Collation, 1 to 2-1/2 in Fastener
Lightweight, high-performance, low-maintenance. The paslode 16 ga pneumatic finish nailer has a best-in-class design that allows for comfort in all applications. This is a reliable and durable tool you can trust to keep up with you. The oil-free design allows for long term, maintenance-free...- $188.10
- $188.10
- Unit price
- per
Sidebar
Recently Viewed Products
1
/
of
20
- Choosing a selection results in a full page refresh.