The HTS provides a tension connection between two members. This economical twist strap resists heavy uplift loads at the rafter or heel of a truss. The HTS has a small bend section to reduce interference at the transition points between the two members. Straps...

The HTP is designed to resist tension when installed on the side of 2 x 4 or larger members. This heavy tie plate is ideal for a variety of applications including connecting two members end-to-end or attaching multiple members together. The HTP can be...

The HRS is designed to resist tension forces between two wood members. The HRS6, HRS8 and HRS12 can be installed on the edge of 2X members. These straps are load-rated, precut straps designed for quick installation and optimal performance. The HRS installs where top...

The HS24 attaches the bottom chord of a truss or rafter at pitches from 0/12 to 4/12 to double 2 x 4 top-plates. Double-shear nailing allows for higher lateral resistance in applications when bottom chord of truss or rafter has no slope. The HS24...

The HTT is a high-strength solution for resisting tension loads in post-pour, wood-to-concrete connections. This heavy, single-piece formed tension tie is fastened with nails or Strong-Drive® SD Connector screws. The HTT has a four-ply formed seat and a design without rivets that does not...

The HTT is a high-strength solution for resisting tension loads in post-pour, wood-to-concrete connections. This heavy, single-piece formed tension tie is fastened with nails or Strong-Drive® SD Connector screws. The HTT has a four-ply formed seat and a design without rivets that does not...

The HTS provides a tension connection between two members. This economical twist strap resists heavy uplift loads at the rafter or heel of a truss. The HTS has a small bend section to reduce interference at the transition points between the two members. Versatile...

The HRS is designed to resist tension forces between two wood members. The HRS416Z is designed for 4X members. These straps are load-rated, precut straps designed for quick installation and optimal performance. The HRS installs where top or bottom plates are cut, at wall...

The HHUS is designed for applications where higher loads are needed. This heavy-capacity hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This feature allows for fewer nails, faster installation and the use of all...

For fast, accurate installation of door and window headers and other cross-members. HH header hangers can speed up the job, strengthen the frame and eliminate the need for trimmers. Protect your door and window header installations from download forces Eliminates the need for studs...

The HRS is designed to resist tension forces between two wood members. The HRS6, HRS8 and HRS12 can be installed on the edge of 2X members. These straps are load-rated, precut straps designed for quick installation and optimal performance. The HRS installs where top...

The HHUS is designed for applications where higher loads are needed. This heavy-capacity hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This feature allows for fewer nails, faster installation and the use of all...

The HRS is designed to resist tension forces between two wood members. The HRS6, HRS8 and HRS12 can be installed on the edge of 2X members. These straps are load-rated, precut straps designed for quick installation and optimal performance. The HRS installs where top...

The HGUS is an extra-heavy-capacity hanger for applications requiring girder support. This girder hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. Value-engineered, the HGUS is designed to carry high-loads for an economical price. Can...

The HHUS is designed for applications where higher loads are needed. This heavy-capacity hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This feature allows for fewer nails, faster installation and the use of all...

Simpson Strong-Tie® HGUS hanger is a heavy-capacity joist hanger that utilizes double-shear nailing for added strength. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation and the use...

The HDU is designed for use in shearwalls and braced-wall panels, as well as other lateral applications in wood construction. The HDU uses Strong-Drive® SDS heavy-duty connector screws which install easily, reduce fastener slip and provide a greater net section than bolts. Predeflected body...

The HDU is designed for use in shearwalls and braced-wall panels, as well as other lateral applications in wood construction. The HDU uses Strong-Drive® SDS heavy-duty connector screws which install easily, reduce fastener slip and provide a greater net section than bolts. Predeflected body...

The HETA embedded truss anchor series provides an engineered method to properly attach roof trusses to concrete and masonry walls. The products are designed with staggered nail patterns for greater uplift resistance. Information regarding the use of two anchors on single and multi-ply trusses...

The HDU is designed for use in shearwalls and braced-wall panels, as well as other lateral applications in wood construction. The HDU uses Strong-Drive® SDS heavy-duty connector screws which install easily, reduce fastener slip and provide a greater net section than bolts. Predeflected body...

The HGA is designed to secure the truss to the top-plate in gable end truss connections and other framing applications. The engineered gusset in the angle increases strength for lateral and uplift loads. This hurricane gusset angle installs easily with Strong-Drive® SDS heavy-duty connector...

The HGAM is designed to secure the bottom chord of a gable end truss or other framing member to masonry. The engineered gusset in the angle increases strength for lateral and uplift loads. This hurricane gusset angle installs easily with 1-1/2 in Strong-Drive® SDS...

The HDU is designed for use in shearwalls and braced-wall panels, as well as other lateral applications in wood construction. The HDU uses Strong-Drive® SDS heavy-duty connector screws which install easily, reduce fastener slip and provide a greater net section than bolts. Predeflected body...

The HDU is designed for use in shearwalls and braced-wall panels, as well as other lateral applications in wood construction. The HDU uses Strong-Drive® SDS heavy-duty connector screws which install easily, reduce fastener slip and provide a greater net section than bolts. Predeflected body...

The H2A single-sided hurricane tie makes a direct connection between the rafter or truss, the top-plates and the wall studs. A value-added solution for high-wind applications, it is designed to resist uplift and lateral loads. By capturing all three framing members, the H2A eliminates...

The H3 single-sided hurricane tie is designed to resist moderate loads at the rafter/truss to-top-plate connection. As part of a continuous load path, the H3 resists both lateral and uplift loads. H3 ties are available in left and right-hand models and can be installed...

The H8 single-sided hurricane tie is designed to resist moderate loads at the top of a wall connection. Provides a connection as part of a continuous load path to resist wind and seismic forces. The H8 is versatile and has been tested for connecting...

The H8 single-sided hurricane tie is designed to resist moderate loads at the top of a wall connection. Provides a connection as part of a continuous load path to resist wind and seismic forces. The H8 is versatile and has been tested for connecting...

The H2.5T single-sided hurricane tie is designed to resist moderate loads at the rafter/truss to-top-plate connection. As part of a continuous load path, the H2.5T resists both lateral and uplift loads. H2.5T ties are available in left and right-hand models and can be installed...

The H2.5A single-sided hurricane tie is designed to resist moderate loads at the rafter/truss to-top-plate connection. As part of a continuous load path, the H2.5A resists both lateral and uplift loads. The symmetrical design eliminates the need for separate right and left parts. Embossments...

The H10A series holds the rafter or truss on both sides for high uplift applications with embossments that add stiffness in crucial areas for improved performance. These U-shaped hurricane ties provide faster installation than using two single-sided ties. H10A models come with optional fastener...

Shine bright through the elements. Built waterproof with an ultra-strong, lightweight polymer handle, the GX20 flashlight goes big on brightness and never backs down. This go-anywhere light offers four modes-medium, high, Turbo, and low-with a max output of 1200 lumens. Use the COAST-patented PURE...

The H2.5A single-sided hurricane tie is designed to resist moderate loads at the rafter/truss to-top-plate connection. As part of a continuous load path, the H2.5A resists both lateral and uplift loads. The symmetrical design eliminates the need for separate right and left parts. Embossments...

Top link and lift arm reducer bushings from Koch Industries are yellow zinc-plated and available for category 0 through 3 tractors. Allows for lower category implements to be used on tractors that are one category higher. Allows for lower category implements to be used...

The H1A provides a connection between the truss or rafter and the wall of the structure that helps resist wind and seismic forces. The H1A is designed for nominal 2X lumber. These U-shaped hurricane ties provide faster installation than using two single-sided ties. The...

The H1A provides a connection between the truss or rafter and the wall of the structure that helps resist wind and seismic forces. The H1A is designed for nominal 2X lumber. These U-shaped hurricane ties provide faster installation than using two single-sided ties. The...

The H10A series holds the rafter or truss on both sides for high uplift applications with embossments that add stiffness in crucial areas for improved performance. These U-shaped hurricane ties provide faster installation than using two single-sided ties. H10A models come with optional fastener...

The H10A series holds the rafter or truss on both sides for high uplift applications with embossments that add stiffness in crucial areas for improved performance. These U-shaped hurricane ties provide faster installation than using two single-sided ties. H10A models come with optional fastener...

Square machine keys from Koch Industries have a lightly oiled finish. Commonly used for mechanical applications, securing wheels or pulleys to a spindle. Installed between shaft key seats and the hub keyways to transmit torque in power transmission assemblies

Koch Replacement Ball, Dimensions: 5-1/2 in L x 5 in W x 2 in H

Hex socket set screws from Koch Industries have a black oxide finish. Commonly used to secure a pulley or gear to a shaft.

Grease fittings from Koch Industries have a zinc-plated finish. Used for lubricating machinery or equipment.

PTO adapters and accessories from Koch Industries are yellow zinc-plated. PTO adapters are used to connect implements to a tractor's PTO shaft and transfer power from the tractor to the implement. Also available are PTO yoke pin assemblies which are used as a repair...

Steering wheel spinners from Koch Industries have an aluminum knob with vinyl coating and steel brackets. Universal design allows for attaching to various steering wheels. Allows for steering with one hand while freeing up the other hand for using controllers. Aluminum knob Universal design...

PTO locking pins from Koch Industries are yellow zinc-plated. They are available in either round or square wire retainers.

Steering wheel spinners from Koch Industries have an aluminum knob with vinyl coating and steel brackets. Universal design allows for attaching to various steering wheels. Allows for steering with one hand while freeing up the other hand for using controllers. Aluminum knob Universal design...

Top link and lift arm reducer bushings from Koch Industries are yellow zinc-plated and available for category 0 through 3 tractors. Allows for lower category implements to be used on tractors that are one category higher. Allows for lower category implements to be used...

Replacement balls from Koch Industries are yellow zinc-plated and are available for category 1 through 2 tractors. Used to replace balls on the top link and lift arm ends. Used to replace balls on top link and lift arm ends

Stabilizer pins from Koch Industries are heat-treated and yellow zinc-plated. Used to connect stabilizer arms to three-point hitch on tractors. They conveniently come with the a nut for securing.

The Deck-Drive™ DWP wood SS screw is a powerful fastening solution for deck, dock and general exterior applications where extra corrosion protection is needed. With its specially designed sharp-point and unique box-threads, the DWP is ideally suited for the majority of wood used in...